NOTIFIER NION-16C48M Jagorar Tsarin Gudanar da Fitarwar hanyar sadarwa ta hanyar sadarwa

Wannan daftarin aiki ya ƙunshi matakai da ƙayyadaddun bayanai don shigar da naúrar da aka jera a sama da kuma lokacin da ya dace, bayani game da daidaitawa akan na'urar da ake sa ido. Don ƙarin cikakkun bayanai na daidaitawa da bayanin aiki, koma zuwa Manual Installation Network, Manual Server Local Area Manual, ko BCI 3 Manual kamar yadda ya dace.

Bayani na NION-16C48M
Hakazalika a cikin aiki zuwa NION-2C8M, NION-16C48M (16 Control, 48 Monitor) shine madaidaicin shigarwa / fitarwa da aka yi amfani da shi akan hanyar sadarwa. Duk abubuwan haɗin tsarin sun dogara ne akan fasahar LonWorks™ (Local Operating Network). NION-16C48M yana ba da ƙofa zuwa cibiyar sadarwa don na'urori masu hankali, kayan aiki da sassan sarrafawa waɗanda ke da busassun lambobin sadarwa. Yana ba da damar na'urori masu hankali suyi aiki akan hanyar sadarwa iri ɗaya kamar kayan aiki tare da fitowar EIA-232.
NION-16C48M yana haɗa hanyar sadarwa ta LonWorks™ FT-10 ko FO-10 tare da na'urori masu hankali da na'urorin sarrafawa na al'ada. Yana ba da tashar sadarwa guda ɗaya, ta hanyoyi biyu don abubuwan shigar da bayanai masu hankali. NIONs sun keɓance ga nau'in cibiyar sadarwar da suke haɗawa (FT-10 ko FO-10). Dole ne a ƙayyade nau'in transceiver kuma a ba da oda daban lokacin yin odar NION.
Ana iya amfani da NION-16C48M ta kowane madogara mai iyaka na wutar lantarki na 24VDC tare da ajiyar baturi wanda shine UL da aka jera don amfani tare da raka'o'in siginar kariyar wuta duk da haka, wannan rukunin ya haɗa da samar da wutar lantarki na MPS24BRB. Dole ne a kula da iko ko sanya shi cikin ft 20 na NION tare da hanyoyin haɗin gwiwa da ke gudana.
NION-16C48M yana hawa a cikin wani shinge (NIS CAB-3) tare da ƙwanƙwasawa. Ba za a iya ɗora shi ba.

16C48MTB Tashar Jirgin Ruwa

An ƙera NION-16C48M don a haɗa shi don sarrafa bangarori da kuma hanyar sadarwa ta hanyar filogi na tasha. NION-16C48M yana da fasali masu zuwa:

Yana yarda da buɗaɗɗen buɗaɗɗen bayanan bayanan lamba ko kullum a cikin kowace

Abubuwan sarrafawa sune SPDT relays masu ƙima a 5A @ 30 VDC.
An yi amfani da shi daga UL da aka jera wutar lantarki, UL mai kulawa da aka jera na'urori masu sarrafawa ko samar da wutar lantarki mai ƙarfi wanda ke da iyakacin ƙarfi, kulawa da UL da aka jera don amfani tare da siginar kariyar wuta.

Ƙararrawa da shigar da matsala
Matsayi, sabis, shigarwa da fitarwa

Ana iya saita abubuwan da aka shigar a matsayin ko dai jihohi biyu marasa kulawa ko jihohi huɗu da ke kula da EOL
Haɗin hanyar sadarwa tare da Transformer ta amfani da salon SMX

Software mai daidaitawa daga toshewar wurin aiki
Kariyar wucin gadi zuwa 2400V akan duka

Ya haɗa da bangon Dutsen bango (NIS CAB-3).

Abubuwan NION

Misali mai zuwa yana nuna abubuwan da aka haɗa kuma ana buƙata don shigar da 16C48M akan hanyar sadarwa. Duk waɗannan abubuwan dole ne a yi oda su daban.

NOTE: Igiyar layi ba ta haɗa da / uded ba.

Bukatun shigarwa

Ana iya shigar da NION-16C48M a cikin yanayin muhalli masu zuwa:

Yanayin zafin jiki daga 0°C zuwa 49°C (32°F – 120°F).

93% zafi mara sanyawa a 30°C (86°F). NIS- CAB3

NION-16C48M ya zo daidaitaccen tare da shingen bango, NIS-CAB3. Wannan shingen yana da ƙofar kullewa da kayan ɗaurawa don taron 16C48M (allon uwa, allon tasha da transceiver na cibiyar sadarwa), samar da wutar lantarki na MPS24BRB, mai canza wuta da batura.
Hawan shingen zuwa matsayin bangonsa

Yi amfani da maɓallin da aka bayar don buɗe shingen
Cire shingen

Dutsen shingen zuwa Nuba zuwa shimfidar ramin hawan shingen da ke ƙasa.
Hana samar da wutar lantarki na MPS24BRB da taransifoma zuwa madaidaitan da ke bayan majalisar ta amfani da abin da aka tanadar.

Dutsen 16C48M motherboard zuwa ginshiƙan masu hawa guda ɗaya

Wurin hawa

An tsara NION-16C48M don shigar da bango a cikin ƙafa 20 na kayan aikin da aka saka a cikin ɗaki ɗaya. Nau'in kayan aikin da aka yi amfani da shi bisa ga ra'ayin mai sakawa ne, amma dole ne ya dace da buƙatun lambar gida.

NION Power Bukatun

NION-16C48M yana aiki da wutar lantarki ta MPS24BRB da aka haɗa. MPS24BRB yana amfani da 110VAC, 1.8A (max.) na iko kuma yana ba da 2.0A na ƙarfin 24VDC da ajiyar baturi daidai da buƙatun lambar gida.
MPS24BRB yana ƙunshe da ginanniyar da'irar cajin baturi mai iya tallafawa batir 6.5 zuwa 17AH 24VDC.
A madadin haka, NION za a iya yin amfani da ita ta kowane madaidaicin tushen VDC 24 mai iyaka wanda ke UL ko ULC da aka jera, wanda ya dace da yankin ku, don amfani da na'urorin siginar kariyar wuta. Don odar sashe na maye suna saka MPS24BRB don Hukumar Maye gurbin. Haɗin wutar lantarki daga MPS24BRB zuwa NION dole ne su kasance kamar haka:
TB1 akan motherboard 16C48M zuwa fil 3 da 4 na TB2 akan MPS24B. Tasha a kan allunan biyu ana yiwa lakabin haɗin kai daidai.

NOTE: A/nayz cire poner daga N/ON kafin yin kowane canji zuwa znitch zettingz da cire ko inzta//ing zaɓi modu/ez, SMX netnork modu/ez da zoftnare haɓaka chizz ko lalacewa na iya rezu/t.

Kanfigareshan shigarwa

Ana iya saita abubuwan shigar don aiki na jihohi biyu marasa kulawa ko jahohi huɗu. Bugu da kari, ana iya saita abubuwan shigar 8 (21 – 24, 45 – 48) don saka idanu da kunna wutar lantarki.tage abubuwan shiga. Ana yin tsarin aiki na jihohi biyu da na jihohi huɗu a cikin toshewar wurin aiki. Kanfigareshan sauya voltagAna yin aikin e ta hanyar saita ¡umpers akan motherboard 16C48M. Waɗannan ¡umpers an haɗa su a cikin yanki a ƙarƙashin allunan tasha.

Mai hankali ko Canja Voltage Input (21 – 24 da 45 – 48) Ana iya saita abubuwan shigarwa na 21 zuwa 24 da 45 zuwa 48 don yin aiki a matsayin mai hankali, jihohi biyu marasa kulawa ko abubuwan da ake kulawa da jihohi huɗu ko, sauya vol.tage (SV) abubuwan shigar. Ana iya daidaita kowace shigarwa daban-daban don mafi girman sassauci. Don ayyana aikin kowane ɗayan waɗannan abubuwan shigarwa, dole ne a saita ¡umpers biyar. Waɗannan ¡umpers an haɗa su tare don ganewa cikin sauƙi. Hoton da ke ƙasa yana nuna wurin waɗannan ƙungiyoyin ¡umper da raguwa na kowane saitin umper don ayyukan da aka ƙayyade.

NOTE: Don ƙarin bayani kan 16C48M p/ug-in app/ication, koma zuwa norkztation manua

Fitar Relays da NC/NO Jumper Saituna

Don bayani kan aikin LED mai fitarwa, koma zuwa sashin NION-16C48M Aiki. Don bayani game da haɗin tashar fitarwa, koma zuwa sashe NION-16C48MTB Tashar Tasha.
Kanfigareshan Software Domin amfani da duk abubuwan da ke akwai tare da NION-16C48M, dole ne a saita kayan aikin 16C48M Plug-In a wuraren aikin tsarin. Siffofin sun haɗa da mai tsara jadawalin don duk abubuwan shigarwa da fitarwa da kuma daidaita kowace shigarwa kamar yadda aka saba buɗe ko rufewa. Ana siffanta kowane Plug-In daki-daki a cikin Bayanin Shigar Samfur da aka aika tare da kowane NION. Ana iya samun bayanin saitin saitin gabaɗaya a cikin jagorar wurin aiki.

16C48M Jawabin Na'urar
Yin magana da na'ura a wurin aiki yana amfani da al'ada mai zuwa: Abubuwan shigarwa - IN1 zuwa IN48
Abubuwan da aka fitar - OUT1 zuwa OUT16

NION-16C48MTB Tashar Tashar Tashar Tashar Tasha

NION-16C48M ya haɗa da allunan 'ya'ya mata biyu waɗanda aka ɗora kai tsaye zuwa uwayen uwa ta amfani da abubuwan tsayawa. Dukkan allunan tashoshi iri ɗaya ne kuma ana iya musanya su. Ana haɗa kowane allon tasha zuwa uwayen uwa ta hanyar igiyoyin ribbon da aka haɗa (hudu a kowace tasha). Ana ƙayyade maƙasudi ga kowane tashar tasha ta wurin matsayin allon allon da ke kan motherboard. Koma zuwa zanen da ke ƙasa don hawan allo da haɗin kebul na ribbon.

Kebul ɗin ribbon suna da ƙarshen duniya kuma ana maɓalli don haɗin da ya dace. Mahaifiyar uwa tana da soket ɗin kebul guda takwas, P1 zuwa P8. Kowane allon tasha yana da kwasfa huɗu masu lakabin P1 zuwa P4. Tashar tashar tasha ta ɗaya (T1) tana kan hagu sannan kuma tasha allo biyu (T2) a hagun. Jadawalin da ke ƙasa yana yin taswirori na katako na uwa zuwa kwas ɗin allon tasha.

Motherboa- rd Socket	Tasha Hukumar	Tasha Socket
P1	T1	P1
P2	T1	P2
P3	T1	P3
P4	T1	P4
P5	T2	P1
P6	T2	P2
P7	T2	P3
P8	T2	P4

Ribbon Cable Mapping

Haɗin shigarwa / fitarwa

Kowane allon tasha yana da layuka huɗu na masu haɗa tasha masu haɗawa zuwa abubuwan shigar ƙasa da wuraren fitarwa. Ana ƙididdige duk abubuwan da aka shigar a ƙima na 5VDC, matsakaicin 2.5mA na yanzu da matsakaicin juriya 500 ohms. Taswirar abubuwan da aka shigar da abubuwan da ake fitarwa zuwa masu haɗin kai kamar yadda aka bayyana ta zane mai zuwa:

NOTE: Ga kowane tashoshi/mai haɗa abubuwan shigarwa da fitarwaz ana ƙidaya su daga / eft zuwa dama.

NOTE: /nput ƙasa iz gama gari ban da shigarwar 21 – 24 da 45 – 48 nhen ana amfani da su don znitched vo/tage saka idanu.

Kara karantawa Game da Wannan Jagoran & Zazzage PDF:

Takardu / Albarkatu

NOTIFIER NION-16C48M Tsarin Gudanar da Fitar da Shigar hanyar sadarwa [pdf] Jagoran Jagora
NION-16C48M, NION-16C48M Tsarin Gudanar da Input na Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Sadarwar Yanar Gizo ta Yanar Gizo, Tsarin Gudanar da Fitarwa, Tsarin Gudanar da Fitarwa, Tsarin Gudanarwa.

Magana

Manual mai amfani