n-com SPCOM00000048 Helmet Intercom System

UMARNI DON MASA

1. Cire dunƙule a bayan akwatin e-box MULTI (Fig. 1).
2. Cire murfin kamar yadda aka nuna a hoton (Fig. 2 - 3).
3. Ɗaga baturi tare da kulawa, kamar yadda baturin ke haɗe zuwa allon kewayawa ta hanyar tef mai gefe biyu (Fig. 4).
4. Cire haɗin baturin tare da kulawa, tare da kulawa ta musamman ga mai haɗa baturin. Tare da hanna guda ɗaya ka riƙe kafaffen haɗin haɗin da aka sayar akan allon kewayawa, kamar yadda aka nuna a hoto (Fig. 5).
5. Cire allon kewayawa daga gidanta (Fig. 6).
6. Cire hatimin daga gidanta kuma maye gurbin kayan aikin (Fig. 7).
7. Maimaita PCB, ba da kulawa ta musamman ga 2 pegs (Fig. 8).
8. Ɗauki sabon baturi kuma cire zanen gadon tef mai gefe biyu (Fig. 9).
9. Haɗa baturin zuwa mai haɗin da aka siyar akan PCB (Hoto 10).
10. Sanya baturin kamar yadda aka nuna a hoton. Yakamata a sanya baturin nisa kamar yadda zai yiwu daga abin da aka kewaye a cikin hoton (Fig. 11).
11. Rufe murfin, daidaita ramukan don masu haɗawa (Fig. 12).
12. Gyara dunƙule a baya. Kar a danne dunƙulewa don gujewa lalata abun. Idan za ta yiwu, yi amfani da na'ura mai ƙarfi (0.5N/m).

Takardu / Albarkatu

n-com SPCOM00000048 Helmet Intercom System [pdf] Manual mai amfani SPCOM00000048 Tsarin Sadarwar Kwalkwali, SPCOM00000048, Tsarin Intercom na kwalkwali, Tsarin Intercom

Magana

• Manual mai amfani