LENNOX 508268-01 Core Unit Controller 
Jagoran Jagora

MUHIMMANCI

Shigarwa mara kyau, daidaitawa, canji, sabis ko kiyayewa na iya haifar da rauni na mutum, asarar rai, ko lalata dukiya.
Dole ne ƙwararren mai sakawa mai lasisi (ko makamancinsa) ko hukumar sabis ya yi shigarwa da sabis

Ƙarsheview

Ana samun ɗaukakawar firmware ta amfani da tashar USB mai kula da Unit Unit M4. Yi amfani da waɗannan hanyoyin don sabunta firmware na Unit Unit mai sarrafawa.

Tabbatar da Nau'in M4 Mai Kula da Firmware na yanzu

Yin amfani da app ɗin Sabis na CORE kewaya zuwa MENU> RTU MENU > SERVICE > KYAUTA FIRMWARE. A saman allon za a jera sigar firmware na yanzu.

Ana shirya Kebul Flash Drive

Kebul flash drive dole ne a tsara shi ta amfani da FAT32 file tsarin. Kebul na filasha da aka ba da shawarar har zuwa iyakar ƙarfin 32GB.

FileAna Bukatar Sabuntawa

FileAna buƙatar haɓaka mai sarrafa naúrar M4 daga kebul na filasha: COREXXXXXXXXXX.C1F

NOTE: Ba da shawarar duk manyan haruffa, amma ba dole ba.
NOTE: xxxxxxxx sune masu riƙe wuri don manya da ƙanana iri da gina bayanin lamba a zahiri file suna, kuma ya bambanta daga wannan sigar zuwa na gaba.

Ƙirƙirar Jaka

1. Ƙirƙiri babban fayil a tushen kebul na filasha mai suna "Firmware".
2. Ƙirƙiri babban fayil a ƙarƙashin babban fayil na "Firmware" mai suna "M4".
3. Sanya kwafin COREXXXXXXX.C1F file A cikin babban fayil mai suna "M4".

Ana ɗaukaka Firmware

1. Saka kebul na filasha a cikin tashar USB na CORE Unit Controller.
2. Yi amfani da app ɗin Sabis na CORE don sabunta firmware. Kewaya zuwa MENU > RTU MENU > SERVICE > FIRMWARE UPDATE kuma zaɓi Haɓaka daga USB zaɓi.
   
3. A allon na gaba za a nuna sigar firmware akan kebul na filasha. Don ci gaba, zaɓi Shigar.

   NOTE: Haɓaka firmware zai ɗauki mintuna 10 zuwa 15.

4. Allon na gaba zai nuna matsayin sabunta firmware.

   

5. Bayan an gama sabunta firmware ɗin wani allon tabbatarwa zai tashi yana nuna cewa an gama sabuntawa kuma tsarin zai sake farawa.
6. Da zarar mai sarrafa naúrar ya sake yin aiki kuma aikace-aikacen Sabis na CORE ya sake haɗawa, ana ba da shawarar sake maimaita matakai 1 da 2 don tabbatar da an sabunta firmware.

NOTE: Hakanan an jera bayanan firmware akan nunin kashi bakwai na mai sarrafa naúrar yayin taya.
An jera firmware a cikin tsari mai zuwa:

• Manyan
• Ƙananan
• Gina

NOTE: Sabunta firmware baya canza saitunan saitin mai sarrafa naúrar. Duk saituna za a riƙe bayan an sabunta firmware.

Ajiye da Loading System Profile

Tsarin Ajiye Profile

Wannan aikin yana adana “profile” a kan mai sarrafa. Abin da ke nufi shi ne Yana saita wurin mayarwa akan mai sarrafawa wanda za'a iya mayar da mai sarrafawa idan an saita mai sarrafawa ba daidai ba, ya rasa sanyi, da dai sauransu. Wannan profile an ƙirƙira shi daga sigogin da aka riga aka ajiye akan mai sarrafawa.

Saboda haka, babu buƙatar tushen a file daga kebul, wayar hannu, da sauransu. Madadin haka, mai amfani kawai danna ajiyewa, kuma mai sarrafawa yana adana sigogin da suka dace a ciki.

1. Saka na'urar ajiya ta USB mai dacewa
2. Akan aikace-aikacen sabis na CORE, je zuwa RTU MENU > LABARI: kuma zaɓi SYSTEM PROFILE.
3. Buga suna na musamman don profile a cikin PROFILE SUNAN filin
4. Zabi ACE karkashin ko dai HANYA or USB dangane da na'urar da kuke son amfani da ita.
5. If HANYA An zaɓi, na'urarka za ta sa ka zaɓi wurin da za ka ajiye ma.

NOTEIdan aikace-aikacen Sabis na CORE ya nuna mai kula da naúrar ya kasa karanta na'urar ajiyar USB, cirewa da sake saka na'urar ma'ajiyar USB da ƙoƙarin ajiye profile sake.

Loading System Profile

1. Saka na'urar ma'auni na USB wanda ya ƙunshi tsarin pro na yanzu da aka ajiyefile, ko ci gaba idan kana da tsarin profile ajiye akan na'urar tafi da gidanka.
2. Je zuwa HIDIMAR > LABARI:. Zabi LOKACI ƙarƙashin wayar hannu ko USB, ya danganta da inda tsarin aikin kufile an ceto.
   NOTEKa'idar Sabis na CORE na iya nuna ko dai mai kula da naúrar ya kasa karanta na'urar ma'ajiyar USB ko kuma ta ɓace. Cire ku sake saka na'urar ajiyar USB da ƙoƙarin loda tsarin Profile sake. Idan batun ya ci gaba, duk bayanai dole ne a shigar da su da hannu.
3. Zaɓi tsarin Pro da ake sofile ta amfani da app ɗin sabis na CORE. Idan ana loda tsarin profile daga USB, zaži NA GABA a ci gaba. Idan an kammala aikin cikin nasara, app ɗin zai nuna "System Profile Loaded"

Takardu / Albarkatu

LENNOX 508268-01 Core Unit Controller [pdf] Jagoran Jagora 508268-01 Mai Kula da Mahimmanci, 508268-01.

Magana

• Manual mai amfani