Interlogix NX-8E
Wiring M2M's MN/MQ Series Cellular
Masu Sadarwa da Shirye-shiryen Kwamitin
Doc. nr. 06049, shafi na 2, Fabrairu-2025

NX-8E Masu Sadar da Hannun Hannu da Shirye-shiryen Kwamitin

HANKALI:

• Ana ba da shawarar cewa gogaggen mai shigar da ƙararrawa ya tsara kwamitin kamar yadda za a iya buƙatar ƙarin shirye-shirye don tabbatar da ingantaccen aiki da amfani da cikakken aikin.
• Kada ku bi duk wani wayoyi akan allon kewayawa.
• Cikakken gwajin kwamiti, da tabbatar da sigina, dole ne mai sakawa ya kammala.

GABATARWA: Ga MN/MQ Series Communicators, za a iya dawo da matsayin kwamitin ba kawai daga matsayin PGM ba amma yanzu kuma daga Buɗewa/Rufe rahotanni daga dialer. Don haka, wiring farar waya da shirye-shiryen matsayin PGM na kwamitin zaɓi ne.
Wayar da farar waya ya zama dole kawai idan Buɗe/Rufe rahoton ya ƙare.
MUHIMMAN NOTE: Buɗewa/Rufe rahoton yana buƙatar kunna yayin aikin haɗin gwiwa na farko.
Wayar da jerin masu sadarwa na MN01, MN02 da MiNi don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar bas.* Ikon nesa ta hanyar bas ɗin maɓalli yana ba ku damar hannu / kwance damara ko hannu a cikin ɓangarorin da yawa, ketare yankuna da samun matsayin yankuna.
Wayar da jerin masu sadarwa na MQ03 don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar bas ɗin maɓalli* * Ikon nesa ta hanyar bas ɗin maɓalli yana ba ku damar hannu / kwance damara ko hannu a cikin ɓangarorin da yawa, ketare yankuna da samun matsayin yankuna.
Wayar da jerin masu sadarwa na MN01, MN02 da MiNi don ba da rahoton abubuwan da suka faru da kuma sarrafawa ta hanyar Keyswitch* * Za'a iya amfani da tsarin maɓalli na zaɓi don masu sadarwa na M2M waɗanda basa goyan bayan aikin maɓalli.
Ba kwa buƙatar saita wannan zaɓi idan na'urarku tana goyan bayan iko ta hanyar bas ɗin maɓalli.
Wayar da jerin masu sadarwa na MQ03 don ba da rahoton abubuwan da suka faru da kuma sarrafawa ta hanyar Keyswitch* * Za'a iya amfani da tsarin maɓalli na zaɓi don masu sadarwa na M2M waɗanda basa goyan bayan aikin maɓalli.
Ba kwa buƙatar saita wannan zaɓi idan na'urarku tana goyan bayan iko ta hanyar bas ɗin maɓalli.
Wayar da jerin MN01, MN02 da MiNi tare da Ringer MN01-RNGR zuwa Interlogix NX-8 don UDL

Shirya Ƙungiyar Ƙararrawar Interlogix NX-8E ta faifan maɓalli

Kunna rahoton ID na lamba:

Yankin Keyswitch Shirin da fitarwa:

Shirya Ƙungiyar Ƙararrawa ta GE Interlogix NX-8E ta Maɓallin Maɓalli don Loda/Zazzagewa (UDL)

Shirya Panel don Loda/Zazzagewa (UDL):

Interlogix NX-8E
Wiring M2M's MN/MQ Series Masu Sadar da Hannun Hannu
da Programming the Panel
Doc. Nr. 06049, shafi na 2, Fabrairu-2025

Takardu / Albarkatu

Interlogix NX-8E Masu Sadarwar Hannun Hannu da Shirye-shiryen Kwamitin [pdf] Littafin Mai shi MN01, MN02, MiNi, MQ03, NX-8E Masu Sadar da Hannun Hannu da Shirye-shiryen Kwamitin, NX-8E, Masu Sadarwar Hannu da Shirye-shiryen Ƙungiyar, Masu Sadarwa da Shirye-shiryen Ƙungiyar, Shirye-shiryen Panel, Panel

Magana

• Manual mai amfani