Interlogix NX-6V2 MN MQ Series Masu Sadar da Hannun Hannu da Shirye-shiryen Kwamitin
Umarnin Amfani da samfur
Waya da Shirye-shiryen Panel
Ana ba da shawarar cewa gogaggen mai saka ƙararrawa ya tsara kwamitin don tabbatar da aikin da ya dace. Kauce wa hanyar sadarwa akan allon kewayawa.
Sabuwar Fasalo – Masu Sadarwar MiNi/MQ:
Ana iya dawo da matsayin kwamitin yanzu daga Buɗe/Rufe \ rahotanni ban da matsayin PGM. Wayar da farar waya da shirye-shiryen matsayin PGM na zaɓi ne, ana buƙata kawai idan Buɗe/Rufe rahoto ya ƙare.
Bude/Rufe Rahoton:
Dole ne a kunna buɗaɗɗe/Rufe rahoton yayin aikin haɗin gwiwa na farko don ingantaccen aiki.
Rahoto na Abubuwan da suka faru da Kulawa Mai Nisa
Don jerin masu sadarwa na MN01, MN02, da MiNi, ana buƙatar wayoyi don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar bas ɗin maɓalli ko maɓallin maɓalli dangane da tallafin na'ura. Don jerin masu sadarwa na MQ03, ana buƙatar wayoyi don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar bas ɗin maɓalli ko maɓallin maɓalli dangane da tallafin na'ura.
Haɗin Ringer MN01-RNGR
Wayar da jerin MN01, MN02, da MiNi tare da Ringer MN01-RNGR zuwa Interlogix NX-8 don UDL.
Shirye-shirye ta faifan maɓalli
Don tsara Interlogix NX-6V2 Ƙararrawa ta hanyar faifan maɓalli, bi matakan da aka bayar a cikin littafin mai amfani. Kunna rahoton ID na lamba kuma saita saitunan shirye-shiryen tsarin.
Rahoton ID na Tuntuɓi:
Bi umarnin shigar da faifan maɓalli da aka bayar don saita rahoton ID na lamba.
Duk Zaɓuɓɓukan Canjawa:
Tabbatar cewa an kunna duk zaɓukan jujjuya don ingantaccen aiki.
HANKALI:
- Ana ba da shawarar cewa gogaggen mai shigar da ƙararrawa ya tsara kwamitin kamar yadda za a iya buƙatar ƙarin shirye-shirye don tabbatar da ingantaccen aiki da amfani da cikakken aikin.
- Kada ku bi duk wani wayoyi akan allon kewayawa.
- Cikakken gwajin kwamiti, da tabbatar da sigina, dole ne mai sakawa ya kammala.
SABON FALALAR: Ga Masu Sadarwar MiNi/MQ, ana iya dawo da matsayin kwamitin ba kawai daga matsayin PGM ba amma yanzu kuma daga Buɗewa/Rufe rahotanni daga dialer. Don haka, wiring farar waya da shirye-shiryen matsayin PGM na kwamitin zaɓi ne. Wayar da farar waya ya zama dole kawai idan Buɗe/Rufe rahoton ya ƙare.
MUHIMMIN NOTE: Buɗewa/Rufe rahoton yana buƙatar kunna lokacin aikin haɗin gwiwa na farko.
Waya
Wayar da jerin masu sadarwa na MN01, MN02 da MiNi don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar motar bas*
* Ikon nesa ta hanyar bas ɗin maɓalli yana ba ku damar hannu / kwance damara ko hannu a cikin ɓangarorin da yawa, ketare yankuna da samun matsayin yankuna.
Wayar da jerin masu sadarwa na MQ03 don ba da rahoton abubuwan da suka faru da kuma sarrafa nesa ta hanyar bas ɗin maɓalli*
* Ikon nesa ta hanyar bas ɗin maɓalli yana ba ku damar hannu / kwance damara ko hannu a cikin ɓangarorin da yawa, ketare yankuna da samun matsayin yankuna.
Wayar da jerin masu sadarwa na MN01, MN02 da MiNi don ba da rahoton abubuwan da suka faru da kuma sarrafawa ta hanyar Keyswitch*
* Za'a iya amfani da saitin maɓallin maɓallin zaɓi don masu sadarwa na M2M waɗanda basa goyan bayan aikin maɓalli. Ba kwa buƙatar saita wannan zaɓi idan na'urarku tana goyan bayan iko ta hanyar bas ɗin maɓalli.
Wayar da jerin masu sadarwa na MQ03 don ba da rahoton abubuwan da suka faru da kuma sarrafawa ta hanyar Keyswitch*
* Za'a iya amfani da tsarin maɓalli na zaɓi don masu sadarwa na M2M waɗanda basa goyan bayan aikin maɓalli. Ba kwa buƙatar saita wannan zaɓi idan na'urarku tana goyan bayan iko ta hanyar bas ɗin maɓalli.
Wayar da jerin MN01, MN02 da MiNi tare da Ringer MN01-RNGR zuwa Interlogix NX-8 don UDL
Shirye-shiryen Interlogix
Shirya Ƙungiyar Ƙararrawa ta Interlogix NX-6V2 ta faifan maɓalli
Kunna rahoton ID na lamba:
| Nunawa | Shigar faifan maɓalli | Bayanin Aiki |
| An shirya tsarin | *89713 | Shigar da yanayin shirye-shirye |
| Shigar da adireshin na'ura | 00# | Don zuwa shirya babban menu |
| Shigar da wuri | 0# | Don saita waya 1 |
| Loc# 0 Seg#1 | 15*, 1*, 2*, 3*,
4*, 5*, 6*, # |
Saita ƙima 123456 da bugun kiran DTMF don wannan lambar (Seg#1 = 15). Danna #
komawa baya (123456 shine tsohonample) |
| Shigar da wuri | 1# | Don saita lambar asusun waya 1 |
| Loc# 1 Seg#1 | 1*, 2*, 3*, 4*, # | Buga lambar asusun da ake so (1234 example). #dawo. |
| Shigar da wuri | 2# | Don saita tsarin sadarwar waya 1 |
| Loc# 2 Seg# 1 | 13* | Saita ƙimar zuwa 13 wanda yayi daidai da "Ademco Contact ID". * don ajiyewa
ku koma. |
| Shigar da wuri | 4# | Don zuwa "Waya 1 ya ruwaito abubuwan da suka faru" menu na juya baya. |
| Loc# 4 Seg# 1 | 12345678* | Ya kamata a kunna duk zaɓuɓɓukan juyawa. * don ajiyewa kuma je zuwa menu na gaba. |
| Loc# 4 Seg# 2 | 12345678* | Ya kamata a kunna duk zaɓuɓɓukan juyawa. * ajiyewa da komawa |
| Shigar da wuri | 5# | Don zuwa "Waya 1 an ruwaito ɓangarori" toggle menu |
| Loc# 5 Seg# 1 | 1* | Kunna zaɓi na 1 don kunna rahoton abubuwan da suka faru daga bangare 1 zuwa lambar waya
1. * ajiyewa da komawa. |
| Shigar da wuri | 23# | Don zuwa menu "Fasalolin Rarraba". |
|
Loc# 23 Seg# 1 |
*,*, 1,*, # |
Danna * sau biyu don zuwa sashe na 3 na zaɓin zaɓi. Kunna zaɓi na 1 (don kunna "Buɗe/Rufe rahoto"), danna * don adanawa sannan # don komawa zuwa
babban menu. |
| Shigar da wuri | Fita, Fita | Danna "Fita" sau biyu don fita yanayin shirye-shirye. |
Yankin Keyswitch Shirin da fitarwa:
| Nunawa | Shigar faifan maɓalli | Bayanin Aiki |
| An shirya tsarin | *89713 | Shigar da yanayin shirye-shirye |
| Shigar da adireshin na'ura | 00# | Don zuwa shirya babban menu |
| Shigar da wuri | 25# | Don zuwa menu na "Nau'in yanki na 1-8". |
| Loc# 25 Seg# 1 | 11,*, # | Don saita Zone1 nau'in azaman maɓalli, * don adanawa kuma je zuwa sashe na gaba,
# don komawa zuwa babban menu. |
| Shigar da wuri | 45 # | Don zuwa "fitarwa na taimako 1 zuwa 4 zaɓin bangare" kunna menu. |
| Loc# 45 Seg# 1 | 1,*, # | Kunna zaɓi na 1 don sanya abubuwan da suka faru daga sashi na 1 zuwa tasirin fitarwa 1. Latsa
* domin ajiyewa sai kaje sashe na gaba, sannan # domin komawa babban menu. |
| Shigar da wuri | 47# | Don zuwa menu na "fitarwa na taimako 1 aukuwa da lokuta". |
| Loc# 47 Seg# 1 | 21* | Shigar da 21 don sanya taron "Halin Makamai" zuwa PGM 1. Danna * don ajiyewa kuma tafi
zuwa kashi na gaba. |
| Loc# 47 Seg# 2 | 0* | Shigar da 0 don saita fitarwa don bin taron (ba tare da bata lokaci ba). Danna * don ajiyewa kuma komawa zuwa babban menu. |
| Shigar da wuri | Fita, Fita | Danna "Fita" sau biyu don fita yanayin shirye-shirye. |
Shirye-shiryen GE Interlogix NX-6V2 Ƙararrawar Ƙararrawa ta hanyar faifan maɓalli don Loda/Zazzagewa (UDL)
Shirya Panel don Loda/Zazzagewa (UDL):
| Nunawa | Shigar faifan maɓalli | Bayanin Aiki |
| An shirya tsarin | *89713 | Shigar da yanayin shirye -shirye. |
| Shigar da adireshin na'ura | 00# | Don zuwa babban menu na gyarawa. |
| Shigar da wuri | 19# | Fara saita "Zazzage lambar shiga". Ta hanyar tsoho, shine "84800000". |
|
Loc#19 Seg# |
8, 4, 8, 0, 0, 0,
0, 0, # |
Saita lambar shiga Zazzagewa zuwa ƙimar sa ta asali. Danna # don ajiyewa kuma
koma baya. MUSULMAI! Wannan lambar yakamata ta dace da wacce aka saita a cikin software na “DL900”. |
| Shigar da wuri | 20# | Don zuwa menu na "Lambar zobe don amsa". |
| Loc#20 Seg# | 1# | Saita adadin zobe don amsawa zuwa 1. Danna # don ajiyewa kuma komawa. |
| Shigar da wuri | 21# | Je zuwa menu na "Download Control". |
| Loc#21 Seg# | 1, 2, 3, 8, # | Duk waɗannan (1,2,3,8) yakamata a kashe su don kashe "AMD" da "Kira".
dawo". |
| Shigar da wuri | Fita, Fita | Danna "Fita" sau biyu don fita yanayin shirye-shirye. |
FAQ
- Tambaya: Ina bukatan ƙwararre don tsara kwamitin?
- A: Ana ba da shawarar cewa gogaggen mai saka ƙararrawa ya tsara kwamitin don tabbatar da aikin da ya dace.
- Tambaya: Shin ana shawarar yin amfani da wayoyi akan allon kewayawa?
- A: A'a, kauce wa tura duk wani waya akan allon da'ira saboda tsaro da dalilan aiki.
Takardu / Albarkatu
 |
Interlogix NX-6V2 MN MQ Series Masu Sadar da Hannun Hannu da Shirye-shiryen Kwamitin [pdf] Littafin Mai shi MN01, MN02, MiNi, MQ03, NX-6V2 MN MQ Jerin Masu Sadar da Hannun Hannu da Shirye-shiryen Ƙungiyar, NX-6V2 MN MQ Series, Masu Sadar da Watsa Labarai da Shirye-shiryen Ƙungiyar, Masu Sadarwa da Shirye-shiryen Ƙungiyar, Shirye-shiryen Ƙaddamarwa, Panel |
