HPR Ignition Console
Jagoran Jagora
Gabatarwa da manufa
HPR Ignition Console ya ƙunshi sassa masu sake amfani da su da sake amfani da su. Yi amfani da waɗannan umarnin don kwakkwance HPR Ignition Console don sake amfani da su.
Kafin ka fara, sanya kwandon shara don nau'ikan sake amfani da su guda uku masu zuwa:
- robobi
- gauraye karfe sake yin amfani da
- E-sharar gida
Kuna iya ceton abubuwa kamar fan shroud, tace iska, wutar lantarki, tankar zafi, capacitors, igiyar wutar lantarki, taswira, inductor, da resistors don sake siyarwa zuwa kasuwa ta kan layi idan suna cikin yanayin aiki. Wannan takaddar tana nuna inda zaku iya sake siyarwa da sake amfani da waɗannan abubuwan da za'a iya cetowa. Gabaɗaya, farashin sakewa ya fi darajar da ke cikin juzu'i. Saboda farashin datti yana canzawa kusan kullun, akwai abin ƙarfafawa don sake yin fa'ida da sakewa maimakon zubar da waɗannan abubuwan a cikin wuraren shara.
GARGADI
HUKUNCIN LANTARKI NA IYA KASHE
Cire haɗin wutar lantarki kafin yin shigarwa ko kulawa. Kuna iya samun girgizar wutar lantarki mai tsanani idan ba'a katse wutar lantarki ba. Girgizar wutar lantarki na iya cutar da ku sosai ko kuma ta kashe ku.
Duk aikin da ke buƙatar cire murfin waje na samar da wutar lantarki na plasma dole ne ƙwararren ƙwararren ya yi.
Koma zuwa Jagoran Tsaro da Ka'ida (80669C) don ƙarin bayanin aminci.
Kayan aikin da ake buƙata
Ana iya yin rarrabuwar HPR Ignition Console tare da ainihin kayan aikin hannu da wutar lantarki waɗanda ke nan a duk duniya.
Ana buƙatar kayan aiki da girma dabam
- Direba TORX® – T20
- Screwdriver – Phillips® shugaban
- Girman soket - 1/32 inch, 11/32 inch, 5/16 inch, 7/16 inch, 1/4 inch
- Tin almakashi (na zaɓi)
- Masu yankan waya
ExampLe scrap dabi'u don kasuwannin Amurka, 2021
Disclaimer
Yawancin abubuwan da ke cikin tsarin HPR Ignition Console za a iya sake yin amfani da su a wurin sake yin amfani da su na gida, amma matsakaicin farashin kowace fam ko ton na waɗannan abubuwan ya bambanta dangane da wurin yanki. Abokan ciniki na ƙasa da ƙasa yakamata su lura cewa nau'ikan abubuwan sake yin fa'ida sun keɓance na ƙasa kuma suna iya bambanta da waɗanda aka jera a ƙasa. An jera duk farashin a cikin dalar Amurka kuma suna wakiltar matsakaicin ƙima na ƙasa a takamaiman lokacin cikin lokaci.
Jimlar ƙima
- Jimlar nauyin naúrar = 24.75 fam
Kasuwa ta ƙare Matsakaicin ƙima na ƙasa (US) ($ kowace fam) ($ kowace ton) Aluminum $0.50 - $0.88 Filastik $0.10 - $0.58 PCBs $0.50 - $1.16 Brass $1.34 - $1.90 Tagulla tagulla $2.77 - $3.34 Igiyoyin wuta / Wayoyi $0.72 - $1.08 Masu canji $0.24 - $0.48 Ƙarfe mai gauraye (tafasa) $1.90 - $2.05
HPR Ignition Console Systems
Mataki na 1
Cire na'urar daga wutar lantarki kuma jira mintuna biyar don ba da damar duk makamashin da aka adana ya fita kafin a ci gaba zuwa Mataki na 2.
Mataki na 2
Cire kusoshi ta amfani da direban T20 TORX.
Yi watsi da kusoshi a cikin rafin sake yin amfani da ƙarfe mai gauraya.
Mataki na 3
Cire kusoshi ta amfani da direban T20 TORX.
Yi watsi da kusoshi a cikin rafin sake yin amfani da ƙarfe mai gauraya.
Mataki na 4
Cire kusoshi da kwayoyi ta amfani da bit direban T20 TORX da soket 5/16 inch.
Yi watsi da kusoshi da goro a cikin rafin sake yin amfani da ƙarfe da aka haɗe.
Mataki na 5
Cire kwayoyi da sukurori ta amfani da soket 11/32 inch da Phillips screwdriver. Ja don cire wayoyi.
Yi watsi da goro, sukurori, da wayoyi a cikin rafin sake yin amfani da ƙarfe da aka haɗe. Yi watsi da PCB cikin rafin sake amfani da sharar E-sharar gida.
Mataki na 6
Lura: Babu buƙatar cire wayoyi. Kuna iya sake yin fa'ida da zaɓin su cikin rafin sake yin amfani da ƙarfe da aka haɗe.
Mataki na 7
Cire kwayoyi ta amfani da soket 7/16 inch kuma ja don cire wayoyi.
A jefar da goro da wayoyi a cikin rafin sharar sake amfani da ƙarfe mai gauraya.
Mataki na 8
Cire kusoshi da kwayoyi ta amfani da direban T20 TORX da soket ¼ inci.
Yi watsi da kusoshi da goro a cikin rafin sake yin amfani da ƙarfe da aka haɗe.
Mataki na 9
Cire sukurori da goro ta amfani da screwdriver Phillips da soket 11/32 inch.
Yi watsi da sukurori da goro a cikin rafin sake yin amfani da ƙarfe da aka haɗe.
Mataki na 10
Cire sukurori da goro ta amfani da screwdriver Phillips da soket 1/32 inch.
Yi watsi da sukurori da goro a cikin rafin sake yin amfani da ƙarfe da aka haɗe. Yi watsi da PCB cikin rafin sake amfani da sharar E-sharar gida.
Mataki na 11
Cire kwayoyi ta amfani da soket ¼ inch da soket 7/16 inch.
A jefar da goro a cikin rafin sake yin amfani da ƙarfe da aka haɗe.
Injiniya da taru a Amurka
ISO 9001: 2015
Hypertherm da HPR alamun kasuwanci ne na Hypertherm, Inc. kuma ana iya yin rijista a Amurka da/ko wasu ƙasashe. Duk sauran alamun kasuwanci mallakin masu su ne.
Da fatan za a ziyarci www.hypertherm.com/patents don ƙarin cikakkun bayanai game da lambobi da nau'ikan haƙƙin mallaka na Hypertherm.
© Oktoba 2021 Hypertherm, Inc.
10078819
Bita 0
Takardu / Albarkatu
 |
Hypertherm HPR Ignition Console [pdf] Jagoran Jagora HPR Ignition Console, HPR Console, HPR, Console, Ignition Console |
