Rukunin Fibaro
Sensor Kofa/Taga tare da Zaɓin Sensor Zazzabi
Saukewa: FIB_FGK-101
Saurin farawa
Wannan a
Sensor Binary
domin
Turai.
Don gudanar da wannan na'urar da fatan za a saka sabo Saukewa: CR1 baturi.
Da fatan za a tabbatar da cikakken cajin baturi na ciki.
Don haɗawa da keɓancewa, aika NIF ko tada na'urar ta tura ƙasa tamper switch (turawa na'urar akan tebur) idan har yanzu ba'a kunna na'urar ba. Sa'an nan kuma danna maɓallin ƙarami (B) a cikin shingen lokaci ɗaya.
Muhimman bayanan aminci
Da fatan za a karanta wannan littafin a hankali. Rashin bin shawarwarin da ke cikin wannan jagorar na iya zama haɗari ko yana iya karya doka.
Mai ƙira, mai shigo da kaya, mai rarrabawa da mai siyarwa ba za su ɗauki alhakin kowace asara ko lalacewa sakamakon gazawar bin umarnin da ke cikin wannan jagorar ko wani abu ba.
Yi amfani da wannan kayan aikin kawai don manufar sa. Bi umarnin zubarwa.
Kada a jefar da kayan lantarki ko batura a cikin wuta ko kusa da buɗaɗɗen wuraren zafi.
Menene Z-Wave?
Z-Wave ita ce ka'idar mara waya ta duniya don sadarwa a cikin Smart Home. Wannan
na'urar ta dace don amfani a yankin da aka ambata a cikin sashin Quickstart.
Z-Wave yana tabbatar da ingantaccen sadarwa ta hanyar sake tabbatar da kowane saƙo (hanya biyu
sadarwa) kuma kowane kulli da ke da wutar lantarki na iya aiki azaman mai maimaita sauran nodes
(hanyar sadarwa) idan mai karɓa baya cikin kewayon mara waya kai tsaye na
watsawa.
Wannan na'urar da kowace na'urar Z-Wave na iya zama amfani tare da wani
ingantaccen na'urar Z-Wave ba tare da la'akari da iri da asali ba idan dai duka biyun sun dace da
kewayon mitar guda ɗaya.
Idan na'urar tana goyan bayan amintaccen sadarwa zai sadarwa tare da wasu na'urori
amintacce muddin wannan na'urar ta ba da tsaro iri ɗaya ko mafi girma.
In ba haka ba za ta juya ta atomatik zuwa ƙaramin matakin tsaro don kiyayewa
koma baya dacewa.
Don ƙarin bayani game da fasahar Z-Wave, na'urori, farar takarda da sauransu. da fatan za a duba
zuwa www.z-wave.info.
Bayanin Samfura
Sensor Door / Window Fibaro mai ƙarfin baturi, firikwensin reed mai jituwa na Z-Wave. Yana haɗa ayyukan na'urori 3 (Reed, binary da firikwensin zafin jiki) a cikin samfuri mai sauƙin amfani. Ana iya amfani da firikwensin don saka idanu ko ƙofar, taga, makafin taga ko ƙofar gareji a buɗe ko rufe. Bugu da kari, zaku iya haɗa kowane firikwensin fitarwa na binary tare da hanyar sadarwar Z-Wave ta amfani da wannan firikwensin, misali na'urori masu auna firikwensin motsi, firikwensin ambaliya, firikwensin tsarin ƙararrawa, da sauransu.
Samfurin ya ƙunshi abubuwa biyu. Ana ɗora ɗaya daga cikin sassan akan ɓangaren motsi na taga ko na ƙofar. An sanya ɗayan ɓangaren akan firam. Ana buƙatar haɗa na'urar a cikin hanyar sadarwar Z-Wave ta hanyar sarrafawa ta ramut ko kowane mai sarrafa Z-Wave. Idan an gano wani aiki, firikwensin yana aika sigina zuwa babban mai sarrafa cibiyar sadarwar Z-Wave.
Shirya don Shigarwa / Sake saiti
Da fatan za a karanta littafin mai amfani kafin shigar da samfurin.
Domin haɗa (ƙara) na'urar Z-Wave zuwa hanyar sadarwa da ita dole ne ya kasance cikin tsohowar masana'anta
jihar Da fatan za a tabbatar da sake saita na'urar zuwa tsohuwar masana'anta. Kuna iya yin hakan ta hanyar
yin aikin keɓancewa kamar yadda aka bayyana a ƙasa a cikin jagorar. Kowane Z-Wave
mai sarrafawa zai iya yin wannan aikin duk da haka ana ba da shawarar yin amfani da na farko
mai sarrafa hanyar sadarwar da ta gabata don tabbatar da cewa an cire na'urar sosai
daga wannan hanyar sadarwa.
Gargadin Tsaro don Batura
Samfurin ya ƙunshi batura. Da fatan za a cire batura lokacin da ba a yi amfani da na'urar ba.
Kar a haxa batura na matakin caji daban-daban ko iri daban-daban.
Shigarwa
Sensor ya ƙunshi sassa biyu: Babban na'urar firikwensin da ɗan ƙaramin magen da ke kunna firikwensin idan an rufe shi zuwa babbar na'urar. Ɗayan ɓangaren firikwensin yana ɗora a kan kafaffen ɓangaren ƙofar ko taga yayin da ɗayan ɓangaren kuma yana kan sashin motsi ta hanya, cewa duka na'urorin biyu suna kusa da juna ba tare da nisa fiye da 5 mm ba a tsakanin su. Ana iya saka babbar na'urar tare da tef mai gefe biyu duk da haka don aikace-aikacen tsaro ana ba da shawarar sosai don amfani da sukurori. Ana sanya ramukan da za a murƙushe na'urar a bayan baturin. Don haka ana buƙatar cire baturin don wannan hanya. Hoton yana nuna maɓallai biyu “TMP” da “B”, firikwensin reed da tashar lamba don maɓalli na waje da firikwensin.
Ana haɗa firikwensin zafin jiki na waje DS18B20 zuwa na'urar kamar yadda aka nuna a wannan hoton. Idan firikwensin zai yi aiki azaman firikwensin zafin jiki kawai ana iya sanya shi a ko'ina kuma babu buƙatar sanya magnet a kusa. Bayan yin aiki azaman firikwensin zafin jiki na'urar kuma zata iya aiki azaman firikwensin dijital mai sauƙi wanda ke watsa matsayi na kunnawa/kashewa waje. Hoton da ke gaba yana nuna yadda ake haɗa irin wannan canjin waje zuwa fil "IN" da "GND".
Hadawa/keɓancewa
A kan tsohuwar masana'anta na'urar ba ta cikin kowace hanyar sadarwa ta Z-Wave. Na'urar tana buƙata
zama ƙara zuwa cibiyar sadarwa mara waya ta data kasance don sadarwa tare da na'urorin wannan cibiyar sadarwa.
Ana kiran wannan tsari Hada.
Hakanan za'a iya cire na'urori daga hanyar sadarwa. Ana kiran wannan tsari Warewa.
Dukkan hanyoyin biyu suna farawa ta hanyar babban mai kula da hanyar sadarwar Z-Wave. Wannan
an juya mai sarrafawa zuwa yanayin haɗawa daban-daban. Hadawa da Warewa shine
sannan ayi aikin hannu na musamman akan na'urar.
Hada
Don haɗawa da keɓancewa danna ƙasa tamper switch (turawa na'urar akan tebur) idan har yanzu ba'a kunna na'urar ba. Sa'an nan kuma danna maɓallin ƙarami (B) a cikin shingen lokaci ɗaya.
Warewa
Don haɗawa da keɓancewa danna ƙasa tamper switch (turawa na'urar akan tebur) idan har yanzu ba'a kunna na'urar ba. Sa'an nan kuma danna maɓallin ƙarami (B) a cikin shingen lokaci ɗaya.
Amfanin Samfur
Na'urar firikwensin yana ba da rahoton canje-canje kuma - idan an haɗe firikwensin zafin jiki na waje - zafin jiki ta amfani da umarnin Z-Wave mara waya. Babu ƙarin hulɗar gida da ake buƙata ko mai yiwuwa.
Tsarin Bayanan Node
Tsarin Bayanan Node (NIF) shine katin kasuwanci na na'urar Z-Wave. Ya ƙunshi
bayanai game da nau'in na'urar da damar fasaha. A hada da
Ana tabbatar da keɓance na'urar ta hanyar aika Firam ɗin Bayanin Node.
Bayan wannan ana iya buƙatar wasu ayyukan cibiyar sadarwa don aika Node
Tsarin Bayani. Don fitar da NIF aiwatar da ayyuka masu zuwa:
Don aika firam ɗin bayanin kumburi danna ƙasa tamper switch (turawa na'urar akan tebur) idan har yanzu na'urar bata kunna ba. Sannan danna ƙaramin maballin (B) a cikin yadi sau ɗaya.
Sadarwa zuwa na'urar bacci (Wakeup)
Wannan na'urar tana sarrafa baturi kuma tana juya zuwa yanayin barci mai zurfi mafi yawan lokaci
don adana lokacin rayuwar baturi. Sadarwa tare da na'urar yana da iyaka. Domin yi
sadarwa tare da na'urar, mai sarrafawa a tsaye C ake bukata a cikin hanyar sadarwa.
Wannan mai sarrafawa zai kula da akwatin saƙo don na'urorin da baturi ke sarrafa da kuma adanawa
umarnin da ba za a iya karɓa ba yayin yanayin barci mai zurfi. Ba tare da irin wannan mai sarrafawa ba,
sadarwa na iya zama mai yiwuwa kuma/ko lokacin rayuwar baturi yana da mahimmanci
rage.
Wannan na'urar za ta tashi a kai a kai kuma ta sanar da farkawa
jihar ta hanyar aika abin da ake kira Wakeup Notification. Mai sarrafawa zai iya sannan
komai cikin akwatin saƙon. Don haka, ana buƙatar saita na'urar tare da abin da ake so
Tazarar farkawa da kuma lambar ID na mai sarrafawa. Idan an haɗa na'urar ta
a tsaye mai sarrafawa wannan mai sarrafa zai yawanci yin duk abin da ake bukata
daidaitawa. Tazarar tashin farkawa shine ciniki tsakanin madaidaicin baturi
lokacin rayuwa da abubuwan da ake so na na'urar. Don tayar da na'urar da fatan za a yi
mataki mai zuwa:
Don tashi na'urar danna ƙasa tamper switch (turawa na'urar akan tebur) idan har yanzu ba'a kunna na'urar ba. Sa'an nan kuma danna maɓallin ƙarami (B) a cikin shingen lokaci ɗaya.
Saurin matsala harbi
Anan akwai ƴan alamu don shigarwar hanyar sadarwa idan abubuwa ba su yi aiki kamar yadda aka zata ba.
- Tabbatar cewa na'urar tana cikin yanayin sake saitin masana'anta kafin haɗawa. A cikin shakka cire kafin hada.
- Idan har yanzu haɗawa ta gaza, duba idan duka na'urorin suna amfani da mitar iri ɗaya.
- Cire duk matattun na'urori daga ƙungiyoyi. In ba haka ba za ku ga jinkiri mai tsanani.
- Kada a taɓa amfani da na'urorin baturi mai barci ba tare da mai kula da tsakiya ba.
- Kar a yi zaben na'urorin FLIRS.
- Tabbatar cewa kuna da isassun na'urar da ke da wutar lantarki don cin gajiyar saƙar
Ƙungiya – na'ura ɗaya tana sarrafa wata na'ura
Na'urorin Z-Wave suna sarrafa sauran na'urorin Z-Wave. Alakar dake tsakanin na'ura daya
sarrafa wata na'ura ana kiransa ƙungiya. Domin sarrafa wani daban
na'urar, na'urar sarrafawa tana buƙatar kula da jerin na'urorin da za su karɓa
sarrafa umarni. Waɗannan jerin sunayen ana kiran su ƙungiyoyin ƙungiyoyi kuma koyaushe
masu alaƙa da wasu abubuwan da suka faru (misali maɓalli da aka danna, firikwensin firikwensin,…). Idan akwai
taron ya faru duk na'urorin da aka adana a cikin ƙungiyoyin ƙungiyoyi zasu
karbi umarnin mara waya mara waya iri ɗaya, yawanci umurnin 'Basic Set'.
Ƙungiyoyin Ƙungiya:
Lambar Rukuni Matsakaicin NodesDescription
| 1 | 5 | An sanya rukunin I don shigar da IN1 (da kuma firikwensin maganadisu). Aika BASIC SET ko ALARM firam ɗin umarni. |
| 2 | 5 | Rukuni II an sanya shi zuwa maɓallin TMP. Da zarar maɓallin ya fito, ana aika firam ɗin ALARM GENERIC zuwa na'urori masu alaƙa. |
| 3 | 1 | Rukuni III yayi rahoton yanayin na'urar, na'ura ɗaya kawai za'a iya sanyawa ga ƙungiyar (babban mai sarrafawa, ta tsohuwa). |
Ma'aunin Kanfigareshan
Ya kamata samfuran Z-Wave suyi aiki daga cikin akwatin bayan haɗawa, duk da haka
wasu ƙayyadaddun tsari na iya daidaita aikin mafi kyau ga buƙatun mai amfani ko buše gaba
ingantaccen fasali.
MUHIMMI: Masu sarrafawa na iya ba da izinin daidaitawa kawai
dabi'u da aka sanya hannu. Domin saita ƙima a cikin kewayon 128 … 255 ƙimar da aka aiko a ciki
aikace-aikacen zai zama ƙimar da ake so ya rage 256. Ga misaliample: za a
siga zuwa 200  ana iya buƙata don saita ƙimar 200 a debe 256 = debe 56.
Idan darajar byte biyu daidai wannan dabarar ta shafi: Ƙimar da ta fi 32768 maiyuwa.
da ake buƙata a ba shi azaman munanan dabi'u kuma.
Siga 1: Shigarwa CIKIN jinkirta soke ƙararrawa
Ƙarin jinkiri bayan ƙararrawa daga shigarwar IN ya ƙare. Ma'aunin yana ba mai amfani damar ƙididdige ƙarin lokaci, bayan haka an soke shigarwar IN ƙararrawa da zarar ta ƙare.
Girman: 2 Byte, Default Value: 0000
SettingDescription
Siga 2: Canjin yanayi yana siginar LED
Girman: 1 Byte, Default Value: 00
SettingDescription
| 00 | LED ya kashe |
| 01 | LED ya kunna |
Siga 3: Nau'in shigarwar IN
Girman: 1 Byte, Default Value: 00
SettingDescription
| 00 | Kusa ta al'ada |
| 01 | Buɗe na al'ada |
| 02 | Mono Stable |
| 03 | m |
Siga 5: Nau'in firam ɗin sarrafawa da aka watsa don ƙungiyar ƙungiya 1, kunna ta hanyar shigarwar IN
Ma'aunin yana ba ku damar tantance nau'in firam ɗin ƙararrawa ko don tilasta watsa firam ɗin sarrafawa (BASIC_SET)
Girman: 1 Byte, Default Value: ff
SettingDescription
| 00 | ALARM GENERIC firam |
| 01 | Firam ɗin ƙararrawa SMOKE |
| 02 | Farashin ALARM CO |
| 03 | ALARM CO2 firam |
| 04 | Firam ɗin zafi na ƙararrawa |
| 05 | Firam ɗin RUWA ALARM |
| ff | Sarrafa firam ɗin BASIC_SET |
Siga 7: Darajar ma'aunin da ke ƙayyade matakin tilastawa na dimming/buɗe abin nadi makafi lokacin da aka aika umarnin u201cswitch onu201d/u201dopenu201d zuwa na'urori daga ƙungiyar ƙungiyar no.1
Idan akwai firam ɗin ƙararrawa an ƙayyade fifikon ƙararrawa. Darajar 255 yana ba da damar kunna na'ura. A cikin tsarin Dimmer yana nufin kunna na'urar da saita ta zuwa yanayin da aka adana a baya, misali lokacin da aka saita Dimmer zuwa 30%, kashewa sannan a sake kunna ta ta amfani da yabo 255, za a saita ta kai tsaye zuwa yanayin da ya gabata watau 30%.
Girman: 1 Byte, Default Value: ff
SettingDescription
| 01-63 | Matsayin dimming |
| ff | Kunna |
Siga 9: Kashe watsawar firam ɗin soke ƙararrawa ko firam ɗin sarrafawa yana kashe na'urar (Basic)
Yana ba da damar kashe aikin kashe na'urar da soke ƙararrawa don na'urorin da ke da alaƙa da shigarwar IN.
Girman: 1 Byte, Default Value: 00
SettingDescription
| 00 | ga kungiyar kungiya no. Ana aika bayanai 1 |
| 01 | ga kungiyar kungiya no. Ba a aika bayani 1 ba |
Siga 12: Hankali ga canje-canjen zafin jiki
Matsakaicin karɓuwa mai karɓa tsakanin zafin jiki na ƙarshe da aka ruwaito da yanayin zafin da ake karantawa daga firikwensin. Idan yanayin zafi ya bambanta da ƙimar saita ko fiye, ana aika rahoto tare da ƙimar zazzabi na yanzu zuwa na'urar da aka sanya zuwa rukunin ƙungiyar no. 3. Don saita ƙimar siga mai dacewa amfani da dabara mai zuwa: x = delta T x 16 - don Celsius; x = delta T x 80/9 - don Fahrenheit; x = ƙimar siga; delta T - matsakaicin m zafin jiki mai karɓa a cikin Celsius ko Fahrenheit. Idan an saita ƙimar zuwa 0: - idan an saita tazarar tashi zuwa 255 seconds, za a aika da rahoton zafin jiki bisa ga tazarar; - Idan an saita tazarar tashi zuwa sama da 255, za a aika da rahoton zafin jiki kowace ca. Minti 4. Samfuran saitunan sigina: 0 - 255 [0oC zuwa 16oC] [32oF - 60,8oF]
Girman: 1 Byte, Default Value: 08
SettingDescription
Ana aika firam ɗin a yanayin u201cbroadcastu201d, watau zuwa duk na'urorin da ke cikin kewayon - bayanan da aka aika a wannan yanayin ba a maimaita ta hanyar hanyar sadarwa.
Girman: 1 Byte, Default Value: 00
SettingDescription
| 00 | Yanayin Watsa shirye-shiryen IN da TMP ba ya aiki |
| 01 | A yanayin watsa shirye-shirye yana aiki, Yanayin watsa shirye-shiryen TMP ba ya aiki |
| 02 | A cikin yanayin watsa shirye-shirye mara aiki, Yanayin watsa shirye-shiryen TMP yana aiki |
| 03 | Yanayin watsa shirye-shiryen IN da TMP suna aiki |
Siga 14: Ayyukan kunna yanayi
A cikin shigarwa: Canja daga u201coffu201d zuwa u201conu201d ID10; Canja daga u201conu201d zuwa u201coffu201d ID11; Ana gane ragowar ID daidai idan an saita ƙimar siga no.3 zuwa 2 Riƙe ƙasa ID12; Sakin ID13; Danna sau biyu ID14; Danna sau uku ID 15; Ayyukan kunna yanayi na iya rage rayuwar baturi, har ma da kashi 25%.
Girman: 1 Byte, Default Value: 00
SettingDescription
| 00 | kashe aiki |
| 01 | aiki kunna |
Bayanan Fasaha
| Girma | 0.0180000×0.0750000×0.0190000mm |
| Nauyi | 10 gr |
| Platform Hardware | ZM3102 |
| EAN | 5902020528111 |
| Nau'in Baturi | Saukewa: CR1 |
| Nau'in Na'ura | Binary Sensor Mai Rarraba |
| Kayan Kayan Kayan Kayan Gida | Sensor Binary |
| Specific Class Class | Binary Sensor Mai Rarraba |
| Shafin Firmware | 02.01 |
| Z-Wave Shafin | 03.2 a |
| Takaddun shaida ID | Saukewa: ZC08-14060004 |
| Z-Wave Samfurin Id | 010f.0700.1000 |
| Yawanci | Turai - 868,4 Mhz |
| Matsakaicin ikon watsawa | 5mW ku |
Darussan Umurni masu goyan baya
- Multi Channel
- Na asali
- Tashi
- Ƙungiya
- Sigar
- Binary Sensor
- Baturi
- Kanfigareshan
- Specific Mai ƙira
- Firmware Sabunta Md
- Ƙararrawa na firikwensin
Bayanin takamaiman sharuddan Z-Wave
- Mai sarrafawa - na'urar Z-Wave ce mai iya sarrafa hanyar sadarwa.
Masu sarrafawa galibi ƙofofin ƙofofi ne, Ikon nesa ko masu kula da bangon baturi. - Bawa - na'urar Z-Wave ce ba tare da ikon sarrafa hanyar sadarwa ba.
Bayi na iya zama na'urori masu auna firikwensin, masu kunnawa har ma da masu sarrafa nesa. - Mai Kula da Farko - shine babban mai tsara hanyar sadarwa. Dole ne ya kasance
mai sarrafawa. Za a iya samun mai sarrafawa na farko ɗaya kawai a cikin hanyar sadarwar Z-Wave. - Hada - shine tsarin ƙara sabbin na'urorin Z-Wave cikin hanyar sadarwa.
- Warewa - shine tsarin cire na'urorin Z-Wave daga hanyar sadarwa.
- Ƙungiya - dangantaka ce mai sarrafawa tsakanin na'ura mai sarrafawa da
na'urar sarrafawa. - Sanarwar Wakeup - saƙo ne na musamman mara waya ta Z-Wave
na'urar don sanar da wanda ke iya sadarwa. - Tsarin Bayanan Node - saƙon mara waya ne na musamman wanda a
Na'urar Z-Wave don sanar da iyawa da ayyukanta.
