EPH CONTROLS R37V2 3 Jagorar Mai Amfani da Shirye-shiryen Yanki

Umarnin Shigarwa

Saitunan Tsoffin Masana'antu

Ƙayyadaddun bayanai

Nuni LCD

1. Nuna lokacin yanzu.
2. Yana nuna ranar mako na yanzu.
3. Nunawa lokacin da aka kunna kariyar sanyi.
4. Nunawa lokacin da faifan maɓalli ke kulle.
5. Nuna kwanan wata.
6. Nuna taken yanki.
7. Yana nuna yanayin yanzu.

Bayanin Maɓalli

Tsarin Waya

Hawa & Shigarwa

Tsanaki!

• ƙwararren mutum ne kawai ya kamata ya yi shigarwa da haɗin kai.
• ƙwararrun masu lantarki ko ma'aikatan sabis masu izini ne kawai aka ba su izinin buɗe mai tsara shirye-shirye.
• Idan an yi amfani da mai shirye-shiryen ta hanyar da masana'anta ba ta bayyana ba, amincinsa na iya lalacewa.
• Kafin saita mai shirye-shirye, ya zama dole don kammala duk saitunan da ake buƙata da aka bayyana a cikin wannan sashe.
• Kafin fara shigarwa, dole ne a fara cire haɗin na'urar daga na'urar sadarwa.

Ana iya hawa wannan mai tsara shirye-shirye ko kuma a ɗaura shi zuwa akwatin da aka ajiye.

1. Cire mai shirye-shirye daga marufi.
2. Zaɓi wurin hawa don mai tsara shirye-shirye:
   – Dutsen mai shirye-shiryen mita 1.5 sama da matakin bene.
   - Hana fallasa kai tsaye zuwa hasken rana ko wasu hanyoyin dumama / sanyaya.
3. Yi amfani da philips screwdriver don sassauta skru na farantin baya a ƙasan mai shirin. Ana ɗaga mai shirin zuwa sama daga ƙasa kuma an cire shi daga farantin baya.
   (Dubi zane na 3 a shafi na 7)
4. Mayar da farantin baya a kan akwatin magudanar ruwa ko kai tsaye zuwa saman.
5. Wayar da farantin baya kamar yadda aka tsara zanen wayoyi a shafi na 6.
6. Zama mai shirye-shiryen a kan farantin baya don tabbatar da cewa masu shirye-shiryen suna yin haɗin sauti, tura mai shirye-shiryen zuwa saman kuma ƙara skru na bayan gida daga kasa. (Dubi zane na 6 a shafi na 7)

Umarnin Aiki

Gabatarwa mai sauri ga mai tsara shirin R37V2:

Za a yi amfani da mai shirye-shiryen R37V2 don sarrafa yankuna daban-daban guda uku a cikin tsarin dumama na tsakiya.
Kowane yanki ana iya sarrafa kansa kuma a tsara shi don dacewa da bukatun ku. Kowane yanki yana da shirye-shiryen dumama har guda uku da ake kira P1, P2 da P3. Duba shafi na 13 don umarni kan yadda ake daidaita saitunan shirin.
A kan allon LCD na mai shirye-shiryen ku za ku ga sassa daban-daban guda uku, ɗaya don wakiltar kowane yanki.
A cikin waɗannan sassan za ku iya ganin yanayin da yankin yake a halin yanzu.
Lokacin cikin yanayin AUTO, zai nuna lokacin da aka tsara yankin gaba don kunnawa ko KASHE.
Don 'Zabin Yanayin' don Allah duba shafi na 11 don ƙarin bayani.
Lokacin da yankin ya kunna, zaku ga jajayen LED don wannan yankin yana haskakawa. Wannan yana nuna cewa ana aika wutar lantarki daga masu shirye-shirye a wannan yankin.

Zaɓin Yanayin

AUTO

Akwai hanyoyi guda huɗu don zaɓi.

AUTO Yankin yana aiki har zuwa lokuta 'ON/KASHE' uku a kowace rana (P1, P2, P3).
DUK RANA Yankin yana aiki da lokacin 'ON/KASHE' sau ɗaya kowace rana. Wannan yana aiki daga lokacin 'ON' da ya gabata zuwa lokacin 'KASHE' na uku.
AKAN Yankin yana kunne na dindindin.
KASHE Yankin yana KASHE na dindindin.
Latsa Zaɓi don canzawa tsakanin AUTO, DUK RANA, AUNA & KASHE.
Za'a nuna yanayin halin yanzu akan allon ƙarƙashin yanki na musamman.
Ana samun Zaɓi a ƙarƙashin murfin gaba. Kowane yanki yana da nasa Zaɓi .

Hanyoyin Shirye-shirye

Wannan programmer yana da hanyoyin shirye-shirye masu zuwa. Yanayin Rana 5/2 Shirye-shiryen Litinin zuwa Juma'a azaman toshe ɗaya kuma
Yanayin Rana 5/2 Shirye-shiryen Litinin zuwa Juma'a a matsayin shinge ɗaya da Asabar da Lahadi a matsayin shinge na biyu.
Yanayin Rana 7 Shirye-shiryen duk kwanaki 7 daban-daban.
Yanayin Awa 24 Shirye-shiryen duk kwanaki 7 azaman toshe ɗaya.

Saitunan Masana'antu 5/2d

Daidaita Saitin Shirin a Yanayin Rana 5/2

Reviewa cikin Saitunan Shirin

Danna PROG .
Latsa OK don gungurawa cikin lokutan rana ɗaya (toshewar kwanaki).
Latsa Zaɓi don tsalle zuwa rana ta gaba (toshewar kwanaki).
Danna MENU don komawa aiki na yau da kullun.
Dole ne ku danna takamaiman Zaɓi don sakeview jadawalin wannan yanki.

Ayyukan Haɓakawa

Ana iya haɓaka kowane yanki na tsawon mintuna 30, 1, 2 ko 3 yayin da yankin yake cikin yanayin AUTO, DUK RANA & KASHE. Latsa Boost 1, 2, 3 ko 4, don amfani da lokacin BOOST da ake so zuwa Yanki. Lokacin da aka danna Boost akwai jinkiri na daƙiƙa 5 kafin kunnawa inda 'BOOST' zai yi haske akan allon, wannan yana ba mai amfani lokaci don zaɓar lokacin BOOST da ake so. Don soke BOOST, sake danna Boost daban-daban. Lokacin da lokacin BOOST ya ƙare ko an soke shi, Yankin zai koma yanayin da yake aiki a baya kafin BOOST.
Lura: Ba za a iya amfani da BOOST ba yayin da yake cikin ON ko Yanayin Holiday.

Ayyukan Ci gaba

Lokacin da yanki ke cikin yanayin AUTO ko ALLDAY, aikin Ci gaba yana bawa mai amfani damar kawo yankin ko shiyyoyin gaba zuwa lokacin sauyawa na gaba. Idan yankin a halin yanzu yana da lokacin kashewa kuma an danna ADV, yankin za a kunna shi har zuwa ƙarshen lokacin sauyawa na gaba. Idan yankin a halin yanzu yana da lokacin kunnawa kuma an danna ADV, yankin za a kashe shi har zuwa farkon lokacin sauyawa na gaba. Danna ADV. Zone1, Zone 2, Zone 3 da Zone 4 za su fara walƙiya. Danna Zaɓin da ya dace. Yankin zai nuna 'KASHEWA' ko 'KASHE' har zuwa ƙarshen lokacin sauyawa na gaba. Yanki 1 zai daina walƙiya kuma ya shiga Yanayin gaba. Zone 2 da Zone 3 za su ci gaba da walƙiya. Maimaita wannan tsari tare da Zone 2 da Zone 3 idan an buƙata. Danna Ok Don soke wani ADVANCE, danna Zaɓin da ya dace. Lokacin da lokacin ADVANCE ya ƙare ko aka soke, yankin zai koma yanayin da yake aiki a baya kafin CIGABA.

Menu

Wannan menu yana bawa mai amfani damar daidaita ƙarin ayyuka. Don samun dama ga menu, danna MENU .

P01 Saita Kwanan wata, Lokaci da Yanayin Shirye-shiryen DST ON

Lura: Da fatan za a duba shafi na 12 don kwatancen Hanyoyin Shirye-shiryen.

P02 Yanayin Hutu

P03 KASHE Kariyar Frost

Alamar Frost zata nuna akan allon idan mai amfani ya kunna ta a cikin menu.

Idan yanayin dakin zafin jiki ya faɗi ƙasa da yanayin kariyar sanyi da ake so, duk yankuna na mai shirye-shiryen za su kunna kuma alamar sanyi za ta yi haske har sai an sami zafin kariyar sanyi.

Taken Yankin P04

Wannan menu yana bawa mai amfani damar zaɓar lakabi daban-daban don kowane yanki. Zaɓuɓɓukan su ne:

P05 PIN

Wannan menu yana bawa mai amfani damar sanya makullin PIN akan mai shirin. Kulle PIN zai rage ayyukan mai shirye-shirye.
Saita PIN

Kwafi Aiki

Ana iya amfani da aikin kwafi kawai lokacin da aka zaɓi yanayin 7d. (Dubi shafi na 16 don zaɓar yanayin 7d) Danna PROG don tsara lokutan ON da KASHE na ranar mako da kake son kwafi. Kar a danna Ok akan lokacin P3, bar wannan lokacin yana walƙiya. Danna ADV , `COPY' zai bayyana akan allon, tare da walƙiya na gobe na mako. Don ƙara jadawalin da ake so zuwa yau latsa . Don tsallake wannan ranar latsa . Danna Ok lokacin da aka yi amfani da jadawalin zuwa kwanakin da ake so. Tabbatar cewa yankin yana cikin yanayin 'Auto' don wannan jadawalin yayi aiki daidai da haka. Maimaita wannan tsari don Zone 2 ko Zone 3 idan an buƙata.
Lura: Ba za ku iya kwafin jadawalin jadawalin daga wannan shiyya zuwa wancan ba, Misali Kwafi Jadawalin Yanki 1 zuwa Zone 2 ba zai yiwu ba.

Zaɓin Yanayin Hasken Baya ON

Akwai saitunan hasken baya guda 3 akwai don zaɓi:
AUTO Hasken baya yana tsayawa na daƙiƙa 10 lokacin da aka danna kowane maɓalli.
ON Hasken baya yana Kunna har abada.
KASHE Hasken baya yana Kashe har abada.

Don daidaita hasken baya latsa ka riƙe Ok na daƙiƙa 10. 'Auto' yana bayyana akan allon. Latsa ko don canza yanayin tsakanin atomatik, Kunnawa da Kashewa. Danna Ok don tabbatar da zaɓi kuma don komawa aiki na yau da kullun.

Kulle faifan maɓalli

Sake saitin Programmer

Don sake saita mai shirye-shirye zuwa saitunan masana'anta:
Latsa MENU .
'P01' zai bayyana akan allon.
Latsa har sai 'P06 reSEt' ya bayyana akan allon.
Latsa Ya yi don za .i.
'no' zai fara walƙiya.
Danna , don canjawa daga 'NO' zuwa 'YES'.
Danna Ok don tabbatarwa.
Mai shirye-shiryen zai sake farawa kuma ya koma ga ma'anar ma'auni na masana'anta.
Ba za a sake saita lokaci da kwanan wata ba.

Sake saitin Jagora

Don ƙware a sake saita mai shirye-shirye zuwa saitunan masana'anta, nemo maɓallin sake saiti na mahimmin a gefen dama a ƙarƙashin mai shirye-shiryen. (duba shafi na 5) Danna maɓallin Sake saitin Jagora kuma a saki shi. Allon zai tafi babu komai kuma ya sake yi. Mai shirye-shiryen zai sake farawa kuma ya koma ga ma'anar ma'auni na masana'anta.

KASHE Tazarar Sabis

Tazarar sabis yana ba mai sakawa ikon sanya lokacin ƙidayar shekara-shekara akan mai shirin. Lokacin da aka kunna Tazarar Sabis 'SErv' zai bayyana akan allon wanda zai faɗakar da mai amfani cewa sabis ɗin tukunyar jirgi ya ƙare.
Don cikakkun bayanai kan yadda ake kunna ko kashe Tazarar Sabis, tuntuɓi sabis na abokin ciniki.

Gudanar da EPH IE
technical@ephcontrols.com www.ephcontrols.com/tuntuɓar mu T +353 21 471 8440

EPH Sarrafa Burtaniya
technical@ephcontrols.co.uk www.ephcontrols.co.uk/tuntuɓar mu T +44 1933 322 072

Takardu / Albarkatu

	EPH CONTROLS R37V2 3 Mai Shirye-shiryen Shiyya [pdf] Jagorar mai amfani R37V2 3 Mai Shirye-shiryen Shiyya, R37V2, Mai Shirye-shiryen Shiyya 3, Mai Shirye-shiryen Shiyya, Mai Shirye-shirye
	EPH CONTROLS R37V2 3 Mai Shirye-shiryen Shiyya [pdf] Jagoran Jagora R37V2 3 Mai Shirye-shiryen Shiyya, R37V2, Mai Shirye-shiryen Shiyya 3, Mai Shirye-shiryen Shiyya, Mai Shirye-shirye

Magana

• Manual mai amfani