Abubuwan da ke ciki boye
1 EPEVER TCP RJ45 A TCP Serial Device Server
2 Ƙarsheview
2.1 Siffofin
2.2 Abubuwan da suka dace
2.3 Software da ake buƙata
3 Haɗin kai
3.1 KOWACE haɗin girgije
3.2 haɗin LAN
4 Sanya kuma saka idanu
4.1 Sanya da saka idanu ta gajimaren EPEVER
4.2 Saita kuma saka idanu ta LAN (Serial port)
4.3 Saita kuma saka idanu ta hanyar LAN (Network)
5 Ma'anar fil
5.1 tashar jiragen ruwa RJ45
5.2 3.81-4P tashoshi
5.3 Mai hana ruwa RS485 tashar jiragen ruwa
6 Takardu / Albarkatu
6.1 Magana
7 Labarai masu alaka

Everever-logo

EPEVER TCP RJ45 A TCP Serial Device Server

Ƙarsheview

Siffofin
  • Sanye take da madaidaicin tashar kebul na cibiyar sadarwa
  • Babban dacewa ba tare da kowane direba ba
  • Unlimited nisa sadarwa
  • Samar da wutar lantarki mai sassauƙa don hanyar sadarwa
  • Daidaitacce 10M/100M Ethernet tashar jiragen ruwa
  • An ƙera shi tare da ƙarancin wutar lantarki, da saurin gudu
Abubuwan da suka dace

Inverter/charger  UP-Hi    RJ45CC-RS485-RS485-20 0U UP

Farashin TCP Abubuwan da suka dace Wasu
Nau'in samfur Sunan jerin Haɗin kai tashar jiragen ruwa Sadarwa na USB Sadarwa hanya
EPEVER TCP RJ45 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Masu sarrafawa LS-B RJ45 Saukewa: CC-RS485-RS485-20 RS485 zuwa TCP/IP Kebul na sadarwa na PCSaukewa: CC-RS485-RS485-200U
GM-N
VS-BN
XTRA-N
TRIRON
Tracer-AN
Tracer-BN
MSC-N
EPIPDB-COM
 

iTracer-ND

  

 

 

3.81-4P

(a cikin layi)

 Saukewa: CC-RJ45-3.81-150U
iTracer-AD
DuoRacer
 LS-BP 3.81-4P

(Ramukan zagaye 4)

 CC-RS485-RS485-15 0U-4LLT
Tracer-BP
Tracer-BPL
Inverters  NP RJ45 Saukewa: CC-RS485-RS485-20
 IP-Plus
IPT
IP
Farashin IM4230
 
Lura: Sauran samfuran EPEVER, waɗanda suka dace da “Standard Modbus Communication Protocol” kuma suna da hanyoyin sadarwa, sun dace da tsarin TCP.
Software da ake buƙata
Bangaren Abubuwan da ake bukata software
Nau'in Suna Mai sakawa Hoto Aiki Source

Duba ko gyara EPEVER TCP
EPEVER TCP sanyi kayan aiki CeBoxDtu 05 Tools CeBoxDtu05 Tools.exe sigogi na module (yanayin aiki, yarjejeniya, IP na gida, DHCP, adireshin bawa, subnet, ƙofa, da
bayanin uwar garke).
TCP Serial Device Server Virtual com software USR-VCOM USR-VCOM.exe Haɓaka adireshin IP na tsarin TCP zuwa tashar COM KOWA
PC Monitor Tashar Solar Tashar Solar  Saka idanu na'urorin halin aiki ko
software Saka idanu Monitor.exe gyara sigogi masu alaƙa.
Aiwatar da Tsarin PC WindowsXP, windows7, windows8, windows10

Haɗin kai

Bayanan kula: 

  • Zaɓi kebul ɗin sadarwar da ta dace ta kowace hanyar sadarwa na mai sarrafawa, inverter, ko inverter/caja. Cikakken igiyoyin sadarwa suna komawa zuwa babi 1.2 Samfuran da suka dace.
  • Bayan samun nasarar haɗawa da PC ta hanyar tashar COM na TCP module, masu amfani za su iya canza sigogin tsarin TCP ko saka idanu akan na'urorin da aka haɗa ta software na PC.
KOWACE haɗin girgije

haɗin LAN

Zaɓi kebul ɗin sadarwar da ta dace ta kowace hanyar sadarwa na mai sarrafawa, inverter, ko inverter/caja.

Sanya kuma saka idanu

Sanya da saka idanu ta gajimaren EPEVER

Mataki 1: Haɗa na'urar kuma kunna ta.
Haɗa na'urar a cikin babin "2 Connection> 2.1 EPEVER girgije dangane", sa'an nan kunna ta ta baturi.
Bayanan kula: Ƙididdigar shigarwar voltage na TCP module shine 5VDC (mai ƙarfi ta RS485 com. tashar jiragen ruwa). Mataki 2: Shigar da uwar garken girgije EPEVER (https://iot.epever.com) akan PC ko bude girgije APP akan wayar. Sannan shiga tare da asusu mai rijista.Ɗauki gajimaren EPEVER akan PC azaman tsohonample: shiga tare da asusun hasken titi, kuma shigar da babban tsarin tsarin sarrafa hasken titi. Bayanan kula:

  • Shiga tare da asusun wutar lantarki don shigar da ƙirar sarrafa shuka.
  • Ayyukan girgije na EPEVER akan wayar hannu suna kama da na PC; da fatan za a koma zuwa ga EPEVER girgije APP littafin mai amfani.

(Na zaɓi) Mataki na 3: Ƙara aikin hasken titi (idan ya riga ya wanzu, tsallake matakin).
Danna "Streetlight> Gudanar da Ayyuka" a cikin taga kewayawa na hagu don ƙara / gyara / share ayyukan.

Danna don ƙara sabon aiki. Shigar da bayanan aikin (Abubuwan da aka yiwa alama da* ana buƙata) kuma zaɓi masu sarrafawa. Danna maɓallin "Ajiye" don ƙara sabon aikin.

Lura: Lokacin ƙara sabon aiki, abu "Account" a cikin shafi [Bayanin Aikin] dole ne ya zama asusun da ba a yi rajista ba tukuna.

Mataki 4: Ƙara tsarin EPEVER TCP zuwa uwar garken gajimare.
Danna "Hagu> Lissafin Mai da hankali" a cikin taga kewayawa na hagu don shigar da adadi na ƙasa. Danna don shigar da "Ƙara Concentrator" dubawa. Shigar da Sunan Mai Tattaunawa, ID mai hankali, IMEI, da Katin SIM. Zaɓi Samfurin Samfurin, Wuri, da aikin (an sanya mai maida hankali). Danna maɓallin "Submitaddamar" don ƙara sabon mai maida hankali.

Bayanan kula:

  • Ana buƙatar abubuwan da aka yiwa alama da *.
  • Lokacin ƙara mai da hankali, tambayi bayanin da ake buƙata ta alamar siliki na samfur ko tuntuɓi mai sabis kai tsaye.
  • Danna alamar don shigar da ƙirar taswira, zaɓi takamaiman wurin kai tsaye kuma danna maɓallin "Submit".

(Na zaɓi) Mataki na 5: Gyara ma'aunin TCP module (idan babu buƙatar gyara, tsallake mataki). Zaɓi wurin mai da hankali kuma danna '' > Alamomin sadarwa '' don karantawa ko rubutawa.

  1. Zaɓi ma'aunin sadarwa daga cikin jerin abubuwan da aka saukar da [Parameter Code] kuma danna maɓallin "Karanta" don karanta sigogin.
    Lura: Ba za a iya zaɓin mai tattara bayanai da yawa lokacin karanta siga ba. Mai maida hankali ɗaya ne kawai za a iya karantawa sau ɗaya.
  2. Zaɓi ma'aunin sadarwa daga jerin abubuwan da aka saukar da [Parameter Code] sannan shigar da sabuwar ƙima a cikin abin [Parameter Value]. Danna maɓallin "Saituna" don saita sabuwar ƙima zuwa mai tattarawa da aka zaɓa.

Bayanan kula:

  • Za'a iya zaɓin mai da hankali da yawa lokacin saita siga. Za a iya saita siga na masu tattara bayanai da yawa sau ɗaya lokaci.
  • Ana iya karantawa ko saita sigogin na'urar ta yau da kullun lokacin aiki. Lokacin da ba a gama karatun ko saitin na yanzu ba, ba za a iya aiwatar da wasu sigogi ba; dubawa yana sa karatu ko rubutu. Ba za a iya karanta ko rubuta tsarin TCP ba lokacin da ba a layi ba.

Mataki 6: Ƙara na'urorin da aka haɗa tare da tsarin TCP zuwa uwar garken girgije na EPEVER. Ɗauki haɗin mai kula da hasken titi azaman tsohonampda:
Danna "Hasken Titin> Lissafin Haske" a cikin taga kewayawa na hagu don shigar da dubawar lissafin haske.

Danna + ADD don shigar da mahallin "Ƙara Haske". Bayanin haske na shigarwa kamar Sunan Haske/Module No/Mashin Kwanan wata/Adireshin Bawa, zaɓi Lambar mai da hankali wanda aka sanya hasken, Model Mai sarrafawa, Ciniki, Duedate, A'a Na'ura, da Wuri. Danna maɓallin "Submit" don ajiyewa.

Bayanan kula:

  • Ana buƙatar abubuwan da aka yiwa alama da *.
  • "Module No" shine lambar bawan LORA da aka haɗa da mai kula da hasken titi, wanda za'a iya samuwa kai tsaye daga teburin daidaitawa na LORA.
  • "Adireshin Bawa": 1 don mai sarrafawa, 3 don inverter, da 10 don inverter/caja. Don Allah kar a gyara shi; in ba haka ba, ana iya shafar sadarwa ta al'ada.
  • Don abun "Location", danna alamar don shigar da ƙirar taswira, zaɓi takamaiman wurin kuma danna maɓallin "Submitaddamar".

(Na zaɓi) Mataki na 7: Gyara ma'aunin mai sarrafa hasken titi (idan babu buƙatar gyara, tsallake mataki).
Zaɓi fitilun titi kuma danna '' > Batch sigogi '' don karantawa ko rubuta sigogi.

A cikin mahallin [Batch Setting], masu amfani za su iya karanta ko rubuta sigogin shafin Load/Batter/Load. Cikakken umarnin game da sigogi akan Load/Batir/Load tab; koma zuwa EPEVER girgije uwar garken littafin mai amfani.

Bayanan kula:

  • Masu kula da fitilun titi da yawa na jeri iri ɗaya na iya aiwatar da [Batch parameters] lokaci guda. Sabanin haka, jeri daban-daban ba za su iya aiwatar da [Batch parameters] lokaci guda ba.
  • Ba za a iya zaɓar mai sarrafa hasken titi da yawa lokacin karanta siga ba. Na'ura daya ce kawai ake iya karantawa a lokaci guda.
  • Ana iya zaɓar mai sarrafa hasken titi da yawa lokacin rubuta siga. Zaɓi siga akan mahaɗin [Batch parameters] kuma shigar da sabuwar ƙima. Danna maɓallin "Rubuta".
  • Ana iya karantawa ko saita sigogin na'urar ta yau da kullun lokacin aiki. Lokacin da ba a gama karatun ko saitin na yanzu ba, ba za a iya aiwatar da wasu sigogi ba; dubawa yana sa karatu ko rubutu. Lokacin da na'urar ta yanzu ba ta layi ba, ba za a iya karanta ko rubuta ba.

Mataki 8: Kula da fitilun titi mai nisa.

  1. Kunna/kashe wuta
    Zaɓi fitilar titi kuma danna "Lamp on” don buɗa akwatin faɗakarwa.Danna "Lamp Kunna” button don kunna wuta daga nesa.
    Lura: Danna > Lamp kashe” don kashe fitilar daga nesa.
  2. Sa ido na ainihi
    Danna "Shigarwa> Kulawa" a cikin taga kewayawa menu na hagu don shigar da dubawar kulawa. Sa ido kan fitilun titi, kunna/kashe fitilun nesa, da saita sigogi.
Saita kuma saka idanu ta LAN (Serial port)

  1. Duba adireshin IP na gida
    Matakan aiki sune kamar haka:
    1. Buga taga "Run" ta danna maɓallin gajeriyar hanya "+R" akan maballin PC, shigar da umarnin "cmd", sannan danna maɓallin "Enter".
    2. Shigar da umurnin "ipconfig" a cikin taga pop-up kuma danna maɓallin "Enter" zuwa view adireshin IP na gida.
    3. An nuna kamar yadda yake a cikin adadi na hagu: Adireshin IP na gida: 192.168.20.24 Mashin Subnet: 255.255.255.0 Ƙofar Default: 192.168.20.1
  2. Sanya sigogi ta kayan aikin TCP
    Matakan aiki sune kamar haka:
    1. Haɗa tashar tashar "COM" na tsarin TCP da PC ta hanyar USB zuwa adaftar sadarwa na RS485 (ƙarin siyan). Lokacin da alamar haɗin ke da ƙarfi kore, haɗin yana yin nasara.
    2. Danna don buɗe kayan aikin "CeBoxDtu05Tools.exe", wanda za'a iya nema daga masu fasaha na tallace-tallace.
    3. Zaɓi tashar tashar jiragen ruwa daga jerin abubuwan da aka saukar na "COM", sannan danna maɓallin "Buɗe".

    Lura: Sanya kayan aikin direba na tashar tashar jiragen ruwa (USB-SERIAL CH340) na farko; in ba haka ba, PC ba zai iya gane tashar tashar jiragen ruwa ba. Ana iya buƙatar kayan aikin direba daga masu fasaha na tallace-tallace

EPEVER-TCP-RJ45-A-TCP-Serial-Na'ura-33

 

  1. Danna maɓallin "Haɗa" don karanta sigogin TCP module. Gyara sigogi ta jerin jerin lambobin da aka yiwa alama a jikin hagu:
    1. Canza "Yanayin Aiki" zuwa" "
    2. Canja "la'auni" zuwa " watsa."
    3. Ragowar 3 na farko na abin "Local IP" ya kamata su kasance daidai da PC na yanzu. IP na gida na PC na yanzu shine 192.168.20.24.
      Don haka abu na "Local IP" yana buƙatar canza shi zuwa 192.168.20.130 (ana iya rubuta na ƙarshe a lokacin so).
    4. Canza "DHCP" zuwa "A kashe."
    5. "Bawan Addr": 1 don mai sarrafawa, 3 don inverter, da 10 don inverter/caja.
    6. Darajar abubuwan "subnet" da "ƙofa" yakamata suyi daidai da PC na yanzu. Subnet na PC na yanzu shine 255.255.255.0, kuma tsohuwar ƙofa ita ce 192.168.20.1. Canja darajar abubuwan "subnet" da "ƙofa" zuwa ga
    7. "Bayanin uwar garken": 65010 shine COM Bayan gyara sigogi na sama, danna maɓallin "Rubuta".
  1. Ƙara Virtual COM
    Matakan aiki sune kamar haka:
     

    EPEVER-TCP-RJ45-A-TCP-Serial-Na'ura-34

    		 1. Shigar kuma buɗe software na USR-VCOM (Lambar Sigar: V3.6.0.985). Ana iya buƙatar mai shigar da software daga masu fasaha na tallace-tallace.
    2. Danna alamar "Ƙara COM" don ƙara tashar tashar COM mai kama da haka ta hanyoyi masu zuwa:

    (1) "Virtual COM": COM1 ~ COM255. Ga misaliample, zaɓi "COM7".

    (2) "Ka'idar Net": Zaɓi "Client TCP."

    (3) "IP/adr mai nisa": Shigar da "Local IP (192.168.20.130)" wanda kayan aikin TCP ya saita

    (4) "Port Remote": Nuna ta atomatik "65010" ta Kayan aikin TCP.

    Bayan kammala duk saituna, danna maɓallin "Ok".
     3. Shafin "Net State" yana nuna "Connected," yana nuna cewa an ƙara COM kama-da-wane cikin nasara.

    Lura: Idan ginshiƙin “Jihar Net” ya nuna haɗin da ya gaza, da fatan za a duba ko tsarin TCP da PC na yanzu suna cikin cibiyar sadarwa iri ɗaya.
  2. Kula da na'urori ta software na PC
    Matakan aiki sune kamar haka:
    1. Haɗa tashar "COM" na TCP module ko RS485 dubawa tare da na'urar. Cikakken kebul na sadarwa yana nufin babi 1.2 Abubuwan da suka dace. Kuma haɗa tashar "Ethernet" na TCP module zuwa na'ura mai ba da hanya tsakanin hanyoyin sadarwa ta hanyar kebul na cibiyar sadarwa (TCP module da PC dole ne su raba hanyar sadarwa iri ɗaya).
      . Zazzage software na PC "Mai kula da caji V1.95 Windows" daga EPEVER website: https://www.epever.com/support/softwares/. Shigar da software na PC "Solar Station MonitorV1.95" a matsayin Jagorar shigarwa.
      3. Danna alamar sau biyu akan PC don buɗe software na "Solar Station MonitorV1.95". Ana nuna mahallin farko a adadi na hagu.
    4. Danna menu na "System" don buga akwatin "Bayanin Tasha". Sa'an nan danna "Controller" tab kuma zaɓi "COM7" don "Port" abu ("COM7" shi ne kama-da-wane COM saita a babi. 3. Ƙara Virtual COM).

    Bayan kammala duk saituna, danna maɓallin "Ƙara".
    kullum-01 5. Bayan ƙara da "COM7", yana nuna "COM7 (Ba ya wanzu ko ba tukuna kafa)" a cikin hagu kewayawa taga. Sanya "COM7" a cikin hanyoyin da ke biyowa.
    1. Danna "COM7 (Ba ya wanzu ko ba a saita ba tukuna)" a cikin taga kewayawa na hagu.
    2. Danna "Port Config" a saman mashaya menu don tashi akwatin "Serial Port Setting".
    3. Zaɓi "COM7" don abun "Port".
    4. Danna maɓallin "Ƙara" don ƙara "COM7" a cikin "Tsarin" filin sarari; to, maɓallin "Ƙara" ta atomatik ya zama maɓallin "Update".
    5. Zaɓi "COM7" a cikin filin "Configuration", kuma danna maɓallin "Sabuntawa" don gamawa.
    6. Danna "Parameters" a saman mashaya menu don saka idanu da na'urorin da kuma canza sigogi masu alaƙa.
Saita kuma saka idanu ta hanyar LAN (Network)

The aiki

1. Haɗa tashar "COM" na TCP module ko RS485 dubawa tare da na'urar. Cikakken kebul na sadarwa yana nufin babi 1.2 Abubuwan da suka dace. Kuma haɗa tashar "Ethernet" na TCP module zuwa na'ura mai ba da hanya tsakanin hanyoyin sadarwa ta hanyar kebul na cibiyar sadarwa (TCP module da PC dole ne su raba hanyar sadarwa iri ɗaya).
2. Danna don buɗe kayan aikin "CeBoxDtu05Tools.exe", wanda za'a iya nema daga masu fasaha na tallace-tallace.
3. Zaɓi "Network" daga jerin abubuwan da aka saukar na "COM", kuma danna maɓallin "Buɗe".
 

 4. Danna maballin "Connect" don tashi akwatin "don Allah shigar da ID na RTU (8 bit)". Shigar da ID na RTU 8-bit don daidaitawa kuma danna maɓallin “Ok” (Ɗauki ID ɗin RTU “00000018” azaman tsohonample).

 

 

 5. Danna maɓallin "Karanta" don nuna bayanan TCP module. Bincika ko bayanin da aka nuna ya dace da buƙatar da ke ƙasa.
  • ID: Zai zama ID na RTU da aka saita a mataki na baya.
  • Yanayin Aiki: Zai zama "Client."
  • Protocol" Zai zama "HNJD."
  • DHCP: Zai zama "Enable."
  • Ƙara Slave: 1 don mai sarrafawa, 3 don inverter, da 10 don inverter/caja.

Idan bayanin tsarin TCP ya dace da buƙatun da ke sama, BABU buƙatar gyara su. In ba haka ba, sadarwar al'ada za ta shafi.

Idan bayanin tsarin TCP bai zama daidai da buƙatar da ke sama ba, gyara su kuma danna maɓallin "Rubuta" don fitar da sababbin sigogi.
6. Shigar da uwar garken girgije EPEVER (https://iot.epever.com) a kan PC. Danna "Hasken Titin> Lissafin Mai da hankali" don shigar da shafin gudanarwa na masu tattara hankali.

Shigar da ID na RTU (kamar 00000018) kuma danna don bincika ƙayyadadden tsarin TCP. Idan ya nuna matsayin "kan layi", an sami nasarar ƙara tsarin TCP zuwa uwar garken gajimare na EPEVER.

Lura: Bayan nasarar ƙara ƙirar TCP zuwa uwar garken girgije na EPEVER, masu amfani na ƙarshe zasu iya saka idanu na na'urar da aka haɗa tare da tsarin TCP ta uwar garken girgije na EPEVER ko software na PC.

Ma'anar fil

tashar jiragen ruwa RJ45
Pin Ma'anarsa
1 +5VDC
2 +5VDC
3 Saukewa: RS485-B
4 Saukewa: RS485-B
5 Saukewa: RS485-A
6 Saukewa: RS485-A
7 GND
8 GND

3.81-4P tashoshi
Pin Ma'anarsa
1 +5VDC
2 Saukewa: RS485-B
3 Saukewa: RS485-A
4 GND
Mai hana ruwa RS485 tashar jiragen ruwa
Pin Ma'anarsa
1 +5VDC
2 Saukewa: RS485-A
3 Saukewa: RS485-B
4 GND

Duk wani canje-canje ba tare da sanarwar farko ba! Lambar sigar: V1.1

Abubuwan da aka bayar na HUIZHOU EPEVER TECHNOLOGY CO., LTD. Lambar waya: +86-752-3889706
Imel: info@epever.com
Website: www.epever.com

Takardu / Albarkatu

EPEVER TCP RJ45 A TCP Serial Device Server [pdf] Jagorar mai amfani
TCP RJ45 A, TCP Serial Device Server, Na'ura Server, TCP Serial Server, Server, TCP RJ45 A

Magana

Labarai masu alaka

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *