Saukewa: ED-IPC2100
Jagorar Aikace-aikace
Abubuwan da aka bayar na EDA Technology Co., Ltd
Yuli 2023
Tuntube Mu
Na gode sosai don siyayya da amfani da samfuranmu, kuma za mu yi muku hidima da zuciya ɗaya.
A matsayinmu na ɗaya daga cikin abokan haɗin gwiwar ƙira na duniya na Rasberi Pi, mun himmatu wajen samar da mafita na kayan aiki don IOT, sarrafa masana'antu, sarrafa kansa, makamashin kore da kuma bayanan ɗan adam wanda ya dogara da dandalin fasahar Raspberry Pi.
Kuna iya tuntuɓar mu ta hanyoyi masu zuwa:
EDA Technology Co.,LTD
Adireshi: Daki 301, Ginin 24, No.1661 Babban Titin Jialuo, Gundumar Jiading, Shanghai
Wasika: sales@edatec.cn
Waya: +86-18217351262
Website: https://www.edatec.cn
Goyon bayan sana'a:
Wasika: support@edatec.cn
Waya: +86-18627838895
Wechat: zzw_1998-
Bayanin Haƙƙin mallaka
Jerin ED-IPC2100 da haƙƙin mallakar fasaha masu alaƙa mallakar EDA Technology Co., LTD.
EDA Technology Co., LTD ta mallaki haƙƙin mallaka na wannan takarda kuma tana da haƙƙin mallaka. Ba tare da rubutaccen izinin EDA Technology Co., LTD ba, babu wani ɓangare na wannan takarda da za a iya gyara, rarraba ko kwafi ta kowace hanya ko tsari.
Disclaimer
EDA Technology Co., LTD baya bada garantin cewa bayanin da ke cikin wannan littafin ya kasance na zamani, daidai, cikakke ko na inganci. EDA Technology Co., LTD kuma baya bada garantin ƙarin amfani da wannan bayanin. Idan asarar kayan ko abin da ba na kayan abu ba ya haifar da amfani ko rashin amfani da bayanan da ke cikin wannan jagorar, ko ta amfani da bayanan da ba daidai ba ko da bai cika ba, muddin ba a tabbatar da cewa niyya ne ko sakaci na EDA Technology Co., LTD, ana iya keɓanta da'awar abin alhaki na EDA Technology Co., LTD. EDA Technology Co., LTD tana da haƙƙin haɓakawa ko haɓaka abubuwan ciki ko ɓangaren wannan littafin ba tare da sanarwa ta musamman ba.
Gabatarwa
Littattafai masu alaƙa
Duk nau'ikan takaddun samfuran da ke cikin samfurin ana nuna su a cikin tebur mai zuwa, kuma masu amfani za su iya zaɓar su view takardun da suka dace daidai da bukatunsu.
| Takardu | Umarni |
| Bayanan Bayani na ED-IPC2100 | Wannan takaddar tana gabatar da fasalulluka na samfur, ƙayyadaddun software da kayan masarufi. girma da oda lambobin ED-IPC2100 jerin don taimaka masu amfani su fahimci gaba daya tsarin sigogi na kayayyakin. |
| ED-IPC2100 Jerin Mai Amfani | Wannan takarda yana gabatar da bayyanar, shigarwa. farawa da daidaita tsarin ED-IPC2100 don taimakawa masu amfani suyi amfani da samfurin mafi kyau. |
| ED-IPC2100 Jerin Jagorar Aikace-aikacen | Wannan takaddar tana gabatar da zazzagewar OS, ƙona eMMC da tsarin juzu'i na jerin ED-IPC2100 don taimakawa masu amfani suyi amfani da samfurin mafi kyau. |
Masu amfani za su iya ziyartar masu zuwa webshafin don ƙarin bayani:https://www.edatec.cn
Iyalin Karatu
Wannan jagorar tana aiki ga masu karatu masu zuwa:
- Injiniya Injiniya
- Injiniyan Lantarki
- Injiniyan Software
- Injiniyan Tsari
Taron Alama
| Alama | Umarni |
 |
Alamun gaggawa, suna nuna mahimman fasali ko ayyuka. |
 |
Alamun sanarwa, wanda zai iya haifar da rauni na mutum, lalacewar tsarin, ko katsewar sigina/asara. |
 |
Zai iya haifar da babbar illa ga mutane. |
Umarnin Tsaro
- Ya kamata a yi amfani da wannan samfurin a cikin yanayin da ya dace da ƙayyadaddun ƙira, in ba haka ba yana iya haifar da gazawa, kuma rashin daidaituwar aiki ko lalacewar ɓangarorin da ya haifar da rashin bin ƙa'idodin da suka dace ba su cikin iyakokin tabbacin ingancin samfur.
- Kamfaninmu ba zai ɗauki kowane alhaki na doka don hatsarurrukan amincin mutum da asarar dukiya da ke haifar da aikin samfur ba bisa ka'ida ba.
- Don Allah kar a canza kayan aiki ba tare da izini ba, wanda zai iya haifar da gazawar kayan aiki.
- Lokacin shigar da kayan aiki, wajibi ne a gyara kayan aiki don hana shi faduwa.
- Idan kayan aikin suna da eriya, da fatan za a kiyaye nisa na akalla 20cm daga kayan aiki yayin amfani.
- Kada a yi amfani da kayan tsaftace ruwa, kuma nisantar da ruwa da kayan wuta.
- Ana tallafawa wannan samfurin don amfanin cikin gida kawai.
1 Shigar da OS
Wannan babin yana gabatar da yadda ake saukar da OS file da kuma flash eMMC.
√ Zazzage OS File
√ Flash eMMC
1.1 Zazzage OS File
Kuna iya saukar da OS na hukuma da ake buƙata File na Rasberi Pi bisa ga ainihin bukatun. Hanyar saukewa ita ce: https://www.raspberrypi.com/software/operating-systems/.
1.2 Flash eMMC
Ana ba da shawarar yin amfani da kayan aikin Rasberi Pi na hukuma, kuma hanyar zazzagewa ita ce kamar haka:
- Hoton Rasberi Pi: https://downloads.raspberrypi.org/imager/imager_latest.exe
- Tsarin Katin SD: https://www.sdcardformatter.com/download/
- Rpiboot: https://github.com/raspberrypi/usbboot/raw/master/win32/rpiboot_setup.exe
Shiri: - An gama zazzagewa da shigar da kayan aikin walƙiya zuwa kwamfutar.
- An shirya Micro USB zuwa kebul na USB-A.
- The OS file da za a yi walƙiya an samu.
Matakai:
An bayyana matakan ta amfani da tsarin Windows azaman example.
- Yi amfani da screwdriver na giciye don kwance sukurori uku akan madaidaicin madaidaicin dogo na DIN akan agogo (matsayin akwatin ja a cikin hoton da ke ƙasa) kuma cire tsoffin maƙallan DIN-dogo.
- Nemo tashar Micro USB akan na'urar, kamar yadda aka nuna a cikin akwatin ja da ke ƙasa.
- Haɗa igiyar wutar lantarki da kebul na walƙiya, kamar yadda aka nuna a hoton da ke ƙasa.
- Cire haɗin wutar lantarki na ED-IPC2100, sannan kunna ta kuma.
- Bude kayan aikin rpiboot da aka shigar don canza tuƙi ta atomatik zuwa harafi.
- Bayan kammala wasiƙar tuƙi, wasiƙar za ta fito a cikin ƙananan kusurwar dama na kwamfutar, kamar yadda aka nuna a cikin hoton da ke ƙasa E drive.
- Bude Tsarin Katin SD, zaɓi wasiƙar da aka tsara, sannan danna “Format” a ƙasan dama don tsarawa.
- A cikin akwatin faɗakarwa, zaɓi "Ee".
- Lokacin da tsarin ya cika, danna "Ok" a cikin akwatin da aka yi.
- Rufe Tsarin Katin SD.
- Bude Hoton Rasberi Pi, zaɓi “ZABI OS” kuma zaɓi “Yi amfani da Kwamfuta” a cikin babban fage.
- Bisa ga faɗakarwa, zaɓi OS da aka sauke file ƙarƙashin hanyar da aka ayyana mai amfani kuma komawa zuwa babban dubawa.
- Danna "ZABI STORAGE", zaɓi tsohuwar na'urar a cikin "Ajiye", kuma komawa zuwa babban dubawa.
- Danna "WRITE" kuma zaɓi "Ee" a cikin akwatin faɗakarwa don fara rubuta OS.
- Bayan an gama rubutun OS, da file za a tabbatar.
- Bayan da file an gama tantancewa, akwatin gaggawar “Rubuta Nasara” ya bayyana, sannan danna “CI gaba” don gama walƙiya eMMC.
- Rufe Hoton Rasberi Pi, cire kebul na USB kuma sake kunna wuta akan na'urar.
Farko Boot Up
Wannan babin yana gabatar da tsari lokacin da mai amfani ya tada tsarin a karon farko.
√ Babu OS
√ Babban Rasberi Pi OS (Desktop)
√ Babban Rasberi Pi OS (Lite)
2.1 Babu OS
Idan ba a shigar da OS ba lokacin yin odar samfurin, ƙirar da aka nuna a cikin adadi mai zuwa zai bayyana lokacin farawa. Ana buƙatar sake shigar da tsarin aiki. Da fatan za a koma zuwa 1 Shigar OS don cikakkun bayanai.
2.2 Aiki na Rasberi Pi OS (Desktop)
Idan kuna amfani da nau'in Desktop na hukuma Rasberi Pi OS, kuma ba a saita OS a cikin saitunan ci gaba na Rasberi Pi Imager kafin walƙiya eMMC. Saitin farko yana buƙatar kammala lokacin da aka fara tsarin.
Matakai:
- Bayan tsarin ya fara kullum, "Barka da zuwa Rasberi Pi Desktop" zai tashi.
- Danna "Na gaba" kuma saita sigogi kamar "Ƙasa", "Harshe" da "Timezone" a cikin buƙatun "Saiti Ƙasa" bisa ga ainihin bukatun.
NASIHA:
Tsohuwar maɓalli na tsarin shine shimfidar madannai na Biritaniya, ko kuma za ku iya duba “Yi amfani da madannai na Amurka” kamar yadda ake buƙata. - Danna "Na gaba" don tsarawa da ƙirƙirar "Shigar da sunan mai amfani", "Shigar da kalmar wucewa" da "Tabbatar da sunan mai amfani" don shiga cikin tsarin a cikin "Create User" budewa.
- Danna "Na gaba":
Idan kayi amfani da tsohon sigar tsohuwar sunan mai amfani pi da tsoho kalmar sirrin raspberry lokacin ƙirƙirar sunan mai amfani da kalmar wucewa, akwatin faɗakarwa mai zuwa zai tashi kuma danna "Ok".
Maɓallin “Set Up Screen” yana buɗewa, kuma ana saita sigogi masu alaƙa da allon kamar yadda ake buƙata.
- (Na zaɓi) Danna "Na gaba" kuma zaɓi cibiyar sadarwar mara waya da za a haɗa a cikin pop-up "Zaɓi WiFi Network" dubawa.
NASIHA:
Idan ka sayi samfur ba tare da aikin Wi-Fi ba, babu irin wannan matakin. - (Na zaɓi) Danna "Na gaba" kuma shigar da kalmar wucewa ta hanyar sadarwa mara waya a cikin "Shigar da kalmar wucewa ta WiFi" dubawa.
NASIHA:
Idan ka sayi samfur ba tare da aikin Wi-Fi ba, babu irin wannan matakin. - Danna "Next" kuma danna "Na gaba" a cikin pop-up "Update Software" dubawa ta atomatik da sabunta software.
- Bayan dubawa da sabunta software, danna "Ok", kuma danna "Sake kunnawa" a cikin "Setup Complete" mai tasowa don kammala tsarin farko kuma fara tsarin.
- Bayan farawa, shigar da tebur na OS, kamar yadda aka nuna a hoton da ke ƙasa.
2.3 Aiki na Rasberi Pi OS (Lite)
Idan kuna amfani da nau'in Lite na hukuma Rasberi Pi OS, kuma OS ba a saita shi a cikin saitunan ci gaba na Rasberi Pi Imager kafin walƙiya eMMC. Saitin farko yana buƙatar kammala lokacin da aka fara tsarin.
Matakai:
- Bayan tsarin ya fara kamar yadda aka saba, mahallin "Configuring Keyboard-Configuration" zai tashi, kuma ana buƙatar saita nau'in madannai daidai gwargwadon yankin.
- Danna "Ok" don ƙirƙirar sabon sunan mai amfani a cikin dubawa na gaba.
- Danna "Ok" don saita kalmar shiga don sabon sunan mai amfani da aka ƙirƙira a cikin dubawa na gaba.
- Danna "Ok" kuma sake shigar da kalmar wucewa a cikin dubawa na gaba.
- Danna "Ok" don kammala saitin farko kuma shigar da haɗin shiga.
- Dangane da hanzari, shigar da sunan mai amfani da kalmar sirri don shiga, kamar yadda aka nuna a cikin hoton da ke ƙasa, yana nuna cewa shiga ya yi nasara.
Sanya Tsarin
Wannan babin yana gabatar da tsari lokacin da mai amfani ya fara tsarin a karon farko.
√ Kunna SSH
√ Kayan aikin Mai sarrafa Network
√ Ƙara APT Library
3.1 Kunna SSH
Idan kuna amfani da Rasberi Pi OS na hukuma, kuna buƙatar kunna SSH da hannu.
Yana goyan bayan kunna SSH ta aiwatar da umarnin raspi-config da ƙara SSH mara kyau file.
3.1.1 Yi amfani da umarnin raspi-config don kunna SSH
Matakai:
- Yi umarni mai zuwa don buɗe ƙa'idar daidaitawar raspi-config 1.
- Zabi "3 Interface Options" kuma danna Shigar, bude raspi-configconfig interface 2.
- Zaɓi "I2 SSH" kuma danna Shigar, buɗe "Shin kuna son kunna uwar garken SSH? ” dubawa.
- Zaɓi "Ee" kuma danna Shigar.
- A cikin "An kunna uwar garken SSH", danna Shigar don komawa zuwa raspi-config interface interface 1.
- Zaɓi "Gama" a cikin ƙananan kusurwar dama kuma latsa Shigar don komawa zuwa sashin umarni.
3.1.2 Ƙara SSH mara kyau File Don Kunna SSH
Ƙirƙiri fanko file ssh mai suna a cikin /boot partition, kuma aikin SSH za a kunna ta atomatik bayan an sake kunna na'urar.
Matakai:
- Yi wannan umarni don ƙirƙirar fanko file mai suna ssh a ƙarƙashin /boot partition.
sudo touch /boot/ssh - Yi wannan umarni don ganin idan ɓangaren /boot ya ƙunshi sabon ƙirƙira ssh file.
ls/boot
Idan ɓangaren /boot ya ƙunshi a file mai suna ssh, yana nufin an ƙirƙira shi cikin nasara, kuma ku tsallake zuwa mataki na 3.
Idan babu file Ana samun ssh mai suna a ƙarƙashin ɓangaren /boot, yana nufin cewa halittar ta kasa kuma tana buƙatar sake ƙirƙira. - Kashe wuta kuma kunna sake kunnawa don sake kunna na'urar.
3.2 Kayan aikin Mai sarrafa Network
Wannan sashe yana bayyana yadda ake shigarwa da kunna kayan aikin NetworkManager.
3.2.1 Shigar da Kayan aikin Mai sarrafa Network
Idan kuna amfani da Rasberi Pi OS na hukuma, kuna buƙatar shigar da kayan aikin NetworkManager da hannu.
Matakai:
- Yi umarni mai zuwa don ganowa da sabunta software.
- Yi umarni mai zuwa don shigar da kayan aikin NetworkManager. sudo dace shigar network-manager-gnome
- Yi umarni mai zuwa don sake kunna tsarin. sudo sake yi
3.2.2 Kunna Mai sarrafa hanyar sadarwa
Bayan shigar da NetworkManager, kuna buƙatar kunna NetworkManager kafin ku iya daidaita shi.
Matakai:
- Aiwatar da umarni mai zuwa don buɗe raspi-config configuration interface 1. sudo raspi-config
- Zaɓi "6 Advanced Options" kuma danna Shigar, buɗe raspi-config interface 2.
- Zaɓi "Hanyar hanyar sadarwa ta AA" kuma danna Shigar, buɗe "Zaɓi saitin hanyar sadarwa don amfani" dubawa.
- Zaɓi "2 NetworkManager" kuma danna Shigar, bude "NetworkManager yana aiki" dubawa.
- Danna Shigar da komawa zuwa raspi-config interface 1.
- Zaɓi "Gama" a cikin ƙananan kusurwar dama kuma danna Shigar don buɗe "Shin kuna son sake yi yanzu?" dubawa.
- Zaɓi "Ee" a cikin ƙananan kusurwar hagu kuma danna Shigar don sake kunna tsarin.
3.3 Ƙara APT Library
Idan kuna amfani da aikin Rasberi Pi OS, kuna buƙatar ƙara ɗakin karatu na APT da hannu kafin amfani da hanyar sadarwar 4G.
Yi waɗannan umarni don ƙara ɗakin karatu na APT.
sudo dace sabunta sudo dace shigar ed-ec20-qmi
ED-IPC2100 Jagorar Aikace-aikacen Serial
Takardu / Albarkatu
 |
EDA Technology ED-IPC2100 Series Industrial Computer Gateway CAN Bus Development Board [pdf] Jagorar mai amfani ED-IPC2100 Series Industrial Computer Gateway CAN Bus Development Board, ED-IPC2100 Series, Industrial Computer Gateway CAN Bus Development Board |