DS18 EQX7PRO Pro-Audio Equalizer tare da 7 Volt-Output LED Nuni

SIFFOFI

EQX7PRO shine madaidaicin sitiriyo-band / crossover wanda aka kirkira musamman don yanayin wayar hannu.

EQX7PRO yana ba da fasali masu ƙarfi a cikin ƙaramin girman:

• Bakwai volts fitarwa LED nuna alama akan kowane Band da fitarwa.
• Ƙungiyoyin daidaitawa bakwai (50Hz, 125Hz, 320Hz, 750Hz, 2.2KHz, 6KHz, da 16KHz), kowane mitar daidaitacce daga -12 zuwa + 12dB (-15 zuwa + 15dB don mitocin subwoofer).
• Fitarwa na Subwoofer yana amfani da ginanniyar 18dB a kowane octave na ketare na lantarki wanda aka gyara a 60Hz ko 120Hz.
• Fitowar sitiriyo RCA guda uku don fitar da gaba, baya, da sautin subwoofer ampmasu rayarwa.
• Shigarwar RCA na sitiriyo don amfani tare da na'urori masu ɗaukuwa, kamar mai kunna MP3 ko na'urar DVD.
• Rarraba sarrafawa don ƙarar mai sarrafa, ƙarar subwoofer (matakin ƙasa), fader na gaba/baya, da zaɓi na manyan bayanai ko ƙarin bayanai.
• Amsar mitar da aka haɓaka daga 20Hz zuwa 30KHz tare da keɓaɓɓen aikin siginar-zuwa-amo na 100 dB.
• Masu haɗin RCA masu launin zinari don tabbatar da mafi kyawun fitowar siginar sauti.
• Mai Canjin Hi-Level mai magana, yi amfani da wannan idan rediyon ba ta da ƙarancin fitowar RCA.
• Kunna Kai tsaye, lokacin da aka haɗa shigarwar Hi-Level zuwa fitarwar lasifikar daga tushen (Factory Rediyo), za a iya kunna EQX7PRO lokacin da aka kunna Rediyo.
• ISO ramukan hawa.

ABIN DA YA HADA A CIKIN KWALLIYA

Baya ga wannan littafin, akwatin ya ƙunshi:

• 7-band mai daidaita hoto
• 2 masu hawa madaukai
• 8 Phillips-kai sukurori
• Hi-Level Input Connector
• Mai Haɗin Wuta

KAFIN FARA

Hawan kariya
Ana iya hawa wannan EQX7PRO kusa da sashin tushe ko kuma ƙarƙashin dash ta amfani da maƙallan hawa. Ikon gaban panel yakamata ya zama mai sauƙi daga wurin zama na direba.

Bugu da kari:

• Wannan rukunin yana buƙatar ƙarin abubuwan haɗin sauti na wayar hannu don aiki mai kyau.
• Yi amfani da kulawa koyaushe lokacin haɗa wani abu zuwa abin hawa! Bincika sharewa a gaba, baya, da kuma bangarorin biyu na shigarwar da aka tsara kafin hako kowane ramuka ko shigar da sukurori.

GARGADI!
Canje-canje ko gyare-gyare ga WANNAN KYAUTATAWA WANDA MAI ƙera BASA YARDA DA KYAUTA ZA SU CUTAR DA WARRANTI KUMA ZA SU KE YARDA DA FCC.

MATAKAN KARIYA

• Kada ku sarrafa wannan samfurin ta hanyoyi daban-daban fiye da waɗanda aka kwatanta a cikin wannan jagorar.
• Kada a sake haɗawa ko gyara wannan sashin.
• Kar a zuba ruwa ko tuda abubuwa na waje a cikin naúrar. Ruwa da zafi na iya lalata kewayawar ciki.
• Idan naúrar ta jike, kashe duk wutar lantarki kuma ka tambayi dilanka mai izini ya tsaftace ko yi hidimar sashin.

Rashin kiyaye waɗannan matakan tsaro na iya lalata motarka, na'urar duba, ko tushen bidiyo, kuma yana iya ɓata garanti.

SHIGA

Shigar da abubuwan sauti na wayar hannu da na bidiyo na buƙatar ƙwarewa tare da nau'ikan hanyoyin injiniya da lantarki. Kodayake wannan jagorar tana ba da umarnin shigarwa gabaɗaya da umarnin aiki, baya nuna ainihin hanyoyin shigarwa don takamaiman abin hawa.

Idan ba ku da ilimin da ake buƙata da ƙwarewar da ake buƙata don kammala shigarwa cikin nasara, tuntuɓi dila mai izini game da zaɓin shigarwa na ƙwararru

• Wannan naúrar ta keɓance don motocin da ke da ƙasa mara kyau, tsarin baturi 12V.
• Kyakkyawan haɗin ƙasa na chassis yana da mahimmanci don rage juriya da guje wa matsalolin hayaniya. Yi amfani da mafi guntuwar waya mai yuwuwa kuma haɗa shi amintacce zuwa chassis ɗin mota da ƙasan sashin tushe.
• Lokacin zazzage igiyoyin RCA, kiyaye igiyoyin daga igiyoyin wutar lantarki da fitattun wayoyi masu magana.
• Idan kana amfani da naúrar tushe ba tare da jagorar kunnawa mai nisa ba, ana iya kunna EQX7PRO tare da jagorar na'ura mai canzawa. Wannan na'ura mai ba da wutar lantarki tana cikin kayan aikin masana'anta a bayan rediyo. Wannan jagorar tana kunna da kashewa tare da maɓallin kunnawa.
• Kar a bude karar. Babu sassan da za a iya amfani da su a ciki. Idan kuna buƙatar taimako, tuntuɓi dilan ku ko cibiyar sabis mai izini.

KAYAN AIKI DA KARIN BAYANI

ZAKA BUKATA:

• Screwdriver-head Phillips lokacin hawa naúrar a cikin abin hawa.
• Karamin lebur-kan screwdriver don daidaita ikon sarrafa AUX idan kun haɗa mai kunna MP3 ko tushen bidiyo.
• Ingantattun igiyoyin shigarwa da fitarwa na RCA.

Ƙarin kebul na iya haifar da asarar sigina kuma yana aiki azaman eriya don amo. Yi amfani da igiyoyin RCA masu inganci kawai waɗanda basu da mahimmanci don yin haɗin kai tsaye tare da sashin tushe da ampmasu rayarwa.

HOTUNAN HAUWA

MULKI

GASKIYAR GASKIYAR GABA

HADIN KAI NA BAYA

LED BUTTONS NUNA

BLUE ON JAN MANYAN FITARWA

 

• Babban matakin da Ƙarar za su raba LED don nuna BLUE/RED (Maximized)
• Aux da Fader ba su da guntu, don haka koyaushe za su kasance shuɗi
• EQ zai raba LED don nuna BLUE/RED (Maximized)
• Hasken BLUE yana kunne lokacin da wuta ke kunne, lokacin da kowace fitowar mitar ta kai kusan 7V, hasken RED zai haskaka (Maximized). Don haka lokacin kunna kiɗan, zai ci gaba da walƙiya mafi girman haske na RED kamar mai nazarin bakan.

BUDURWAR FIRGITA

GARGADI
DOMIN HANA GAJERIN YANAR GIZO A LOKACIN SALLAH, A CI GABATAR DA CIWON MOTAR (-) JAGORAN BATIRI KAFIN YIN HADA.

SAURARA

ARZIKI TSARI NA AIKI

1. Juya babban ƙarar mai girma da sarrafa matakin subwoofer zuwa mafi ƙarancin saitunan su.
2. Kunna sashin tushe kuma ƙara ƙara har sai kun ji murdiya.
3. Rage ƙarar zuwa ƙasan wurin murdiya (kimanin 80% na cikakken ƙara).
   Wannan shine matsakaicin siginar kiɗan da za'a iya amfani dashi don sashin tushe. Juya ƙarar bayan wannan batu yana ƙara ƙara da murdiya ba tare da ƙara siginar kiɗa ba.

NOTE
Da zarar kun saita ƙarar rukunin tushen, kar a canza shi. Yi amfani da ikon sarrafa ƙara koyaushe akan EQX7PRO azaman babban (babban) sarrafa ƙara. EQX7PRO yana da mafi kyawun na'urorin lantarki, sauti mafi girma zuwa amo, kuma yana da layi fiye da saitunan ƙara akan kowace naúrar tushe da ake samu.

GYARA SARAUTA

EQX7PRO yana da kewayon mitar guda bakwai:
Kuna iya daidaita tsakiyar kowane rukunin mitar don daidaita sautin muryar cikin motar ku.

1. Saita duk mitoci zuwa tsakiyar matsayi. Ya kamata a saita ƙaramin digo akan kullin sarrafawa da ƙarfe 12 na rana.
2. Kunna waƙar kiɗan da kuka fi so kuma daidaita abubuwan sarrafawa ɗaya don dacewa da dandano. Guji matsananciyar saituna, waɗanda zasu iya karkatar da kololuwar kiɗa.
3. Ƙara ko rage ikon sarrafa mai daidaitawa don dacewa da dandano.
4. Idan tsarin ku ya ƙunshi subwoofer, sannu a hankali ƙara matakin subwoofer har sai kun ji ƙaƙƙarfan bass.
5. Idan tsarin ku ya ƙunshi lasifikan baya, daidaita ikon fader don ƙara sautin baya. Saita shi don haka yawancin kiɗan suna fitowa daga gaba kuma kawai suna cika na baya.

TSAYA MATAKIYAR KARANCIN WUTA
Saita ƙaramin mitar wucewa a saman Mai daidaitawa zuwa ko dai 60Hz ko 120Hz dangane da subwoofer da subwoofer. ampAbubuwan buƙatu.

HADA MAJALISAR AUDIYO ZUWA GA SHIRIN TAIMAKO

1. Toshe kowane tushen mai jiwuwa cikin shigar RCA mai taimako a bayan sashin EQX7PRO.
2. Tabbatar maɓallin taimako a gaban naúrar ya fita, a shirye don karɓar shigarwa daga babban shigarwar RCA (ba shigar da RCA na ƙarin ba).
3. Juya ƙarar maigidan zuwa matakin sauraron al'ada.
4. Danna maɓallin kunna akan tushen taimako.
5. Danna maɓallin AUX don canzawa zuwa tushen taimako.
6. Yin amfani da ƙaramin madaidaicin screwdriver, daidaita abubuwan sarrafa AUX da ke saman naúrar ta yadda ƙarar tushen abin taimako ya dace da ƙarar babban tushe.

KUNNA AIKIN AUTO
Ana amfani da shi kawai a cikin yanayin shigarwa mai girma, shigarwar nesa daga rediyon ba a haɗa shi da REM ba, lokacin da aka haɗa shigar da L / R zuwa babban fitarwa daga tushen (Factory Radio), EQX7PRO za a iya kunna lokacin da Rediyo ya kasance. kunna.

REM FITAR
DC 12V Ayyukan fitarwa mai nisa

KULA DA KIYAYE
TSARKAKE MA'AIKATA
Yi amfani da laushi, bushe bushe don goge ƙura da datti daga naúrar.
Kada a yi amfani da benzene, sirara, mai tsabtace mota, ko masu tsabtace ether. Wadannan abubuwa na iya lalata naúrar ko kuma sa fenti ya bare.

HIDIMAR DA Equalizer / CROSSover Unit
A yayin da matsala ta taso, kar a taɓa buɗe harka ko tarwatsa naúrar. Sassan ciki ba su da sabis na mai amfani. Bude kowane abu zai ɓata garanti.

BAYANI

SASHEN daidaitawa

• Nau'in Daidaitawa ………………………………………………………………………………………………… Zane
• Adadin makada …………………………………………………………………………………………………………………………..7
• Matsakaicin Mitar ………………………………………………………………………………………………………………………
• Boost/CutCortar……………………………………………… 12dB (Matsakaicin Subwoofer 15dB

SASHEN CIGABA:

• Hanyoyi masu wucewa / Nau'in………………………………………….1 (LPF) (Subwoofer Ch
• Matsakaicin Mitar Crossover a…..60/120Hz Zaɓuɓɓuka
• Yanke-Kashe Juyin Halitta …………………………………………………………………………………………………………………………….. 12dB/Oktoba

BAYANIN AUDIO:

• Adadin S/N ………………………………………………………………………………………………………………………………………………………………………….100dB
• THD …………………………………………………………………………………………………………………………………………………………………………………………………………………………
• Hankalin shigarwa………………………………………………………………………………………………………………………………………….50mV-3V
• Input Impedance……………………………………………………………………………………………………………….20Kohm
• Fitarwa Voltagee………………………………………………………………………………………………………………………………………………………………
• Ƙaddamar da Fitarwa………………………………………………………………………………………………………………………………………………
• Shugaban Dakin …………………………………………………………………………………………………………………………. 20dB
• Rabuwar sitiriyo……………………………………………………………………………………………… 82dB @ 1khz
• Martanin Mitar ………………………………………………………………………………………………………

SIFFOFI

• Mai aiki Voltage: ………………………………………………………………………………………………………… 11-15V
• Fitowar Subwoofer: …………………………………………………………………………………………………………………………
• Gudanar da Audio: .................................................................................
• Abubuwan shigar Audio:………………………………………………………………………………………………………………………………………………………………………………………………………
• Nau'in RCA …………………………………………………………………………………………………………
• Kayayyakin Gidaje………………………………………. Karfe / Aluminum
• Gyare-gyare .....................................................................................

KARIN SIFFOFI 

• Knobs:…………………………………………………………………………………………………
• Shigar da Mai-Level Mai Magana …………………………………………………………………………
• Kunnawa ta atomatik ………………………………………………………………………………… (Shigar da matakin Hi-Level)
• Shigarwar Kunna Nesa………………………………………………………………………………………………………………
• Entrada:

SAURARA

• Tsawon Gabaɗaya……………………………………………………………………………………………………………….. 7 ″ / 178mm
• Zurfin Gabaɗaya…………………………………………………………………………………………………………………………………………………………………………………………
• Tsawon Gabaɗaya……………………………………………………………………………………………………………………………………………………………………………………………….1.18″ / 30mm

NOTE
Bayanan fasaha da ƙirar kayan aiki na iya canzawa ba tare da sanarwa na farko ba saboda haɓakar fasaha.

CUTAR MATSALAR

NA'ASAR BA YA AIKI; BABU HASKE
Maiyuwa ba za a haɗa wayoyi masu ƙarfi ba. Duba wutar lantarki da wayoyi na ƙasa, sannan sake gwadawa.

SAUTI YA KARYA

• Za a iya saita ƙarar rukunin tushe da yawa. Rage ƙarar naúrar tushe.
• An saita ikon sarrafa riba mai daidaitawa da yawa. Juya ikon daidaitawa zuwa tsakiyar matsayi kuma sake sauraron murdiya. Idan har yanzu matsalar tana faruwa, duba dillalin ku mai izini.
• Ana iya lalacewa masu magana. Tuntuɓi dilan ku mai izini.

BABU SAUTI NA ZUWA DAGA RAKA

• An zaɓi shigar da ba daidai ba. Latsa maɓallin AUX don kunna manyan abubuwan shigarwa.
• Babu nesa-on. Yin amfani da voltmeter, bincika + 12V daga tushen mai nisa.

GARANTI
Da fatan za a ziyarci mu webshafin DS18.com don ƙarin bayani kan manufofin garanti.
Mun tanadi haƙƙin canza samfura da ƙayyadaddun bayanai a kowane lokaci ba tare da sanarwa ba. Hotuna na iya ko a'a haɗa da kayan aikin zaɓi.

GARGADI: Ciwon daji da cutarwar Haihuwa. www.p65warning.ca.gov

GLOSSARY

• Ketarewa: Na'urar da ke iyakance kewayon mitoci da aka aika zuwa lasifika ko ampmai sanyaya wuta.
• Daidaitawa: Tsarin haɓaka ko yanke mitocin siginar sauti don haɓaka ingancin sautin. Kalmar ta fito ne daga masu tacewa da ake amfani da su don ƙara babban mitoci a ƙarshen karɓar watsawar analog akan wayoyi.
• Ƙungiyar daidaitawa: Kewayon mitar ya yi tasiri ta takamaiman tacewa.
• dB: Decibel, ma'auni na bambancin dangi a cikin iko ko ƙarfi tsakanin siginar sauti guda biyu
• Samun iko: Riba shine adadin amphaske (voltage, halin yanzu ko iko) na siginar sauti da aka bayyana a cikin dB
• Mai daidaita hoto: Madaidaicin madaidaicin band-band wanda ke amfani da sarrafa injina don daidaitawa amplitude.
• Hz: Gajarta ga Hertz, raka'a na mitar daidai da zagayowar daya a cikin dakika daya.
• Octave: Ƙa'idar kiɗa na rarraba mitocin sauti zuwa bayanin kula guda takwas na ma'aunin kiɗan.
• OEM: Maƙerin Kayan Asali
• RCA shigarwa/fitarwa: Tashar tashar da sauti ke tafiya ciki da waje daga cikin tsarin; "RCA" tana nufin nau'in haɗin, wanda Gidan Rediyon Amurka ya ƙera shi.
• gangara: Yaya saurin canza sautin da aka ƙididdigewa a dBs. Mafi girman lambar dB, saurin mitar yana raguwa.

Da fatan za a ziyartan ƙarin BAYANI DS18. CIKAWA ZIYARAR
DS18.COM
Muna son shi da ƙarfi

Takardu / Albarkatu

DS18 EQX7PRO Pro-Audio Equalizer tare da 7 Volt-Output LED Nuni [pdf] Littafin Mai shi EQX7PRO Pro-Audio Equalizer tare da 7 Volt-Output LED Indicator, EQX7PRO, Pro-Audio Equalizer tare da 7 Volt-Output LED Indicator, Pro-Audio Equalizer

Magana

• Manual mai amfani