ENGINEERING ELECTRONIC 4 Abubuwan Fitarwa Relay Expander Board Output Module
Jagoran Jagora
Module na Fitar da Fitar da Fitowa 4
Abubuwan da aka bayar na ELECTRONIC ENGINEERING LTD.
4 FITOWA DA KYAUTA EXPANDER BOARD MOULE 12V/1A
Umarnin shigarwa
Kafin fara shigarwa da aiki da wannan na'urar Da fatan za a karanta Umarnin Tsaro.
Iyakar bayarwa
Hukumar RELAY
Riƙen allo (x4)
Umarnin shigarwa
Gabatarwa
An tsara allon RELAY don shigarwa na ciki a cikin shingen filastik. Kwamitin RELAY yana haɗi zuwa babban allon kulawa ta hanyar faifan maɓalli na waya 4.
Kwamitin RELAY yana ba da lambobin sadarwa masu zaman kansu guda huɗu waɗanda za a iya amfani da su don yin mu'amala da wasu na'urori kamar kofofin gareji, kofofin atomatik, da sauransu.
Umarnin Aiki
Kwamitin kula da CROW yana ba da damar har zuwa fitowar ƙararrawa guda 8. 4 daga cikin waɗannan abubuwan ana samun su azaman daidaitattun kan-jirgin akan kwamiti mai kulawa kuma ƙarin abubuwan da ake samu ba za a iya samun dama ga kawai ta wannan kwamiti na relay na zaɓi ba.
Naúrar Relay tana da abubuwan buɗaɗɗen masu tarawa transistor guda 8 da abubuwan Relays guda 4. Buɗe masu tarawa suna canzawa zuwa 0V lokacin da fitarwa ke kunne. Kowane iko na wannan allon yana kunna fitowar relay guda ɗaya da kuma Buɗewar Abubuwan Tara guda ɗaya.
Dutsen allon RELAY
Tabbatar cewa an cire filogin AC da baturi na Control Panel kafin haɗa naúrar.
A. Saka masu riƙe robobi zuwa ramukan 4 a kusurwoyin allon RELAY.
B. Cire murfin daga gefen manne na masu riƙe da filastik.
C. Haɗa allon kuma manne shi zuwa wani yanki na kyauta a gefen dama na tushe mai kulawa.
D. Haɗa wayoyi na Bus guda 4 zuwa Tashar Tashar (Data, Clock, Neg, Pos).
Yi amfani da robobin da aka kawo kawai.
Saitin abubuwan da aka fitar
Akwai masu tsalle-tsalle guda 4 a kan allon RELAY da aka lakafta a matsayin "Koyi" daga 1 - 4. Ana amfani da waɗannan masu tsalle-tsalle don zaɓar abubuwan sarrafawa da kuma danganta su zuwa abubuwan fitarwa.
Mai tsalle na farko da aka yiwa lakabi da "1", yana da alaƙa da Relay #1, zuwa ga mai tsalle mai lakabin "4" wanda ke da alaƙa da Relay # 4.
Idan jumper #1 yana cikin OFF matsayi to relay #1 zai bi shirye-shiryen da aka tsara don fitarwa # 1, idan jumper #1 yana ON to relay #1 zai bi tsarin da aka tsara don fitarwa # 5.
Idan jumper #2 ya KASHE to relay # 2 ya bi fitarwa # 2, idan jumper #2 yana ON to relay #2 ya bi fitarwa # 6, da sauransu, har zuwa jumper 4 yana yin relay # 4 ya bi fitarwa #4 ko #8.
Da fatan za a duba tebur mai zuwa don ƙarin cikakkun bayanai;
| Tsalle | SAURARA #1 JUMPER #1 |
SAURARA #2 JUMPER #2 |
SAURARA #3 JUMPER #3 |
SAURARA #4 JUMPER #4 |
| KASHE | Fitowa #1 | Fitowa #2 | Fitowa #3 | Fitowa #4 |
| ON | Fitowa #5 | Fitowa #6 | Fitowa #7 | Fitowa #8 |
Saitin Panel Control
Dole ne a kunna zaɓin mai zuwa a cikin Ƙungiyar Sarrafa don kunna RELAY:
P25E10E……….. ZABI 6 DOLE YA KASANCE
Bayanan Fasaha
| Data a Protocol | KWAKWALWA CONTROL BUS |
| Yin aiki Voltage | 11 zuwa 16Vdc |
| Amfanin Yanzu | Aiki: 20mA kowane aiki Jiran aiki: 15mA |
| Relay Lambobin sadarwa | Farashin 24VDC1A |
| Buɗe Driver Collector Abubuwan da aka fitar |
12VDC 50mA |
| Alamar LED | LED guda ɗaya don kowane gudun ba da sanda |
| Yanayin aiki | -10 - + 50 ° C |
| Yanayin ajiya | -20 - + 60 ° C |
| Humidity (EN60721) | <85 `)/0 rh, ba mai haɗawa ba |
| kin amincewa da EMI har zuwa 1 GHz | > 10 V/m |
TAMBAYA: EN 50130-4+A1+A2, EN301489-3, EN300220-3, EN60950-1, EN61000-6-3, EN55022 KL. B, EN50371
Abubuwan da aka bayar na Crow ELECTRONIC ENGINEERING LTD. ("Crow") - SHAIDAR SIYASAR GARANTI
Ana ba da wannan Takaddun Takaddun garanti don goyon bayan mai siye (a ƙarƙashin "Mai siyi") don siyan samfuran kai tsaye daga Crow ko daga mai rarrabawa mai izini.
Crow yana ba da garantin waɗannan samfuran don su kasance masu 'yanci daga lahani a cikin kayan aiki da aiki a ƙarƙashin amfani da sabis na yau da kullun na tsawon watanni 24 daga ranar ƙarshe ta mako da shekara waɗanda lambobinsu ke buga su akan allon da'ira da ke cikin waɗannan samfuran (a ƙarƙashin "Granti) Lokaci")).
Dangane da tanade-tanaden wannan Takaddar Garanti, a lokacin Lokacin Garanti, Crow yana aiwatarwa, bisa ga ra'ayinsa kawai kuma bisa tsarin Crow, kamar yadda irin waɗannan hanyoyin ke zama lokaci zuwa lokaci, don gyara ko musanya, kyauta don kayan da/ko aiki. , samfurori sun tabbatar da rashin lahani a cikin kayan aiki ko aiki a ƙarƙashin amfani da sabis na yau da kullun. Abubuwan da aka gyara za su kasance da garanti na ragowar lokacin Garanti na asali.
Duk farashin sufuri da haɗarin wucewar asara ko lalacewa masu alaƙa, kai tsaye ko a kaikaice, zuwa samfuran da aka mayar wa Crow don gyara ko musanya su kaɗai ne mai siye.
Garanti na Crow a ƙarƙashin wannan Takaddar Garanti ba ta rufe samfuran da ba su da lahani (ko za su lalace) saboda: (a) canjin samfuran (ko kowane ɓangarensa) ta kowa banda Crow; (b) haɗari, cin zarafi, sakaci, ko kulawa mara kyau; (c) gazawar samfurin da Crow bai bayar ba; (d) gazawar software ko hardware wanda Crow bai bayar ba; (e) amfani ko ajiya wanin daidai da ƙayyadaddun umarnin aiki da ajiya na Crow.
Babu wani garanti, bayyana ko fayyace, na kasuwanci ko dacewa da samfuran don wata manufa ko akasin haka, wanda ya wuce bayanin akan fuskar nan.
Wannan ƙayyadadden Takaddun Takaddun Takaddun garanti shine kaɗaicin mai siye da keɓantaccen magani akan tafin Crow da Crow da keɓantaccen abin alhaki ga mai siye dangane da samfuran, gami da ba tare da iyakancewa ba - don lahani ko rashin aiki na samfuran. Wannan Takaddar Garanti ta maye gurbin duk wasu garanti da abin dogaro, na baka, rubuce-rubuce, (wanda ba na tilas ba) na doka, na kwangila, cikin azabtarwa ko akasin haka. Babu wani hali da Crow zai zama alhakin kowa ga duk wani sakamako ko lahani (ciki har da asarar riba, da kuma rashin kulawar Crow ko wani ɓangare na uku a madadinsa) don keta wannan ko wani garanti, bayyana ko bayyana. , ko kuma bisa wani abin alhaki komai. Crow baya wakiltar cewa waɗannan samfuran ba za a iya daidaita su ba ko kewaye; cewa waɗannan samfuran za su hana kowane mutum rauni ko asarar dukiya ko lalacewa ta hanyar sata, fashi, wuta ko wani abu; ko kuma waɗannan samfuran a kowane hali za su ba da isasshen gargaɗi ko kariya.
Mai siye ya fahimci cewa samfurin da aka shigar da shi da kyau yana iya rage haɗarin sata, wuta, fashi ko wasu abubuwan da ke faruwa ba tare da bayar da ƙararrawa ba, amma ba inshora ba ne ko garantin cewa irin wannan ba zai faru ba ko kuma ba za a yi ba. rauni ko asarar dukiya ko lalacewa a sakamakon haka. Saboda haka, Crow ba zai da alhakin kowane rauni na mutum; lalacewar dukiya ko wata asara dangane da iƙirarin cewa waɗannan samfuran sun gaza ba da wani gargaɗi.
Idan Crow yana da alhakin kai tsaye ko a kaikaice, ga duk wata asara ko lalacewa dangane da waɗannan samfuran, ba tare da la'akari da dalili ko asali ba, mafi girman abin alhaki ba zai wuce farashin siyan waɗannan samfuran ba, wanda zai zama cikakke kuma magani na musamman akan Crow.
Abubuwan da aka bayar na ELECTRONIC ENGINEERING LTD
ISRA'ILA:
12 Kineret St., POB 293, Filin jirgin sama-Birnin, 70100.
Lambar waya: 972-3-9726000
Fax: 972-3-9726001
Imel: support@crow.co.il
ITALIYA:
DEATRONIC Via Giulianello 1/7 00178 ROMA, ITALY
Lambar waya: +39-06-7612912
Fax: + 39-06-7612601
Imel: info@deatronic.com
Amurka:
2160 Arewa Central Road, Fort Lee, NJ 07024
Tel: 1-800-GET COW (201) 944 0005
Fax: (201) 944 1199
Imel: support@crowelec.com
AUSTRALIA:
142 Keys Road Cheltenham Vic 3192
Tẹli: 61-3-9553 2488
Fax: 61-3-9553 2688
Imel: crow@crowaust.com.au
LATIN AMERICA:
COW LATIN AMERICA 5753 NW 151ST.Street
MIAMI LAKE,
FL 33014 Amurka
Tel: +1-305-823-8700
Fax: +1-305-823-8711
Imel: sales@crowlatinamerica.com
POLAND:
VIDICON SP. ZO. O. 15 Povazkowska St. 01 797
Warsaw Tel: 48 22 562 3000
Fax: 48 22 562 3030
Imel: vidicon@vidicon.pl
Takardu / Albarkatu
 |
Injiniya CROW ELECTRONIC 4 Abubuwan Fitarwa Fasa Faɗakarwa Hukumar Fitar Module [pdf] Jagoran Jagora 4 Fitowa Relay Expander Board Output Module, Expander Board Output Module, 4 fitarwa fitarwa Module, fitarwa Module, Expander Board, Module |
