Control4 C4-CORE3 Core-3 Hub da Jagoran Shigar Mai Sarrafa

An ƙera shi don ƙwarewar nishaɗin ɗakin iyali na musamman, Mai Kula da Control4® CORE-3 ya yi fiye da sarrafa kayan aiki a kusa da TV ɗin ku; shi ne tsarin da ya dace da tsarin farawa na gida tare da nishaɗi da aka gina a ciki.CORE-3 yana ba da kyakkyawan tsari, mai fahimta, da amsa mai amfani akan allon tare da ikon ƙirƙirar da haɓaka ƙwarewar nishaɗi ga kowane TV a cikin gidan. CORE-3 na iya tsara nau'ikan na'urorin nishaɗi da yawa waɗanda suka haɗa da 'yan wasan Blu-ray, tauraron dan adam ko akwatunan kebul, na'urorin wasan bidiyo, TV, da kusan kowane samfur mai sarrafa infrared (IR) ko serial (RS-232). Hakanan yana da ikon sarrafa IP don Apple TV, Roku, telebijin, AVRs, ko wasu na'urori masu haɗin cibiyar sadarwa, da amintaccen ikon ZigBee mara waya don fitilu, ma'aunin zafi da sanyio, makulli masu wayo, da ƙari. Don nishaɗi, CORE-3 kuma ya haɗa da. ginanniyar uwar garken kiɗa wanda ke ba ku damar sauraron ɗakin karatu na kiɗanku, yawo daga manyan ayyukan kiɗa iri-iri, ko daga na'urorin ku na AirPlay ta amfani da fasahar Control4 ShairBridge.

Abubuwan da ke cikin akwatin
Ana haɗa abubuwa masu zuwa a cikin akwatin CORE-3:

CORE-3 mai sarrafawa

AC igiyar wuta
Masu fitar da iska (4)

Eriya na waje (1)

Akwai na'urorin haɗi don siya

CORE-3 Bracket Dutsen bango (C4-CORE3-WM)
Rack Dutsen Kit (C4-CORE3-RMK)

Control4 3-Mita Mara waya ta Eriya Kit (C4-AK-3M)
Control4 Dual-Band WiFi adaftar USB (C4-USBWIFI KO C4-USBWIFI-1)

Control4 3.5 mm zuwa DB9 Serial Cable (C4-CBL3.5-DB9B)

Bukatu da ƙayyadaddun bayanai

Lura: Muna ba da shawarar amfani da Ethernet maimakon WiFi don mafi kyawun haɗin cibiyar sadarwa.
Lura: Ya kamata a shigar da cibiyar sadarwar Ethernet ko WiFi kafin fara shigarwar mai sarrafa CORE-3.

Lura: CORE-3 yana buƙatar OS 3.3 ko sabo. Ana buƙatar software na mawaki Pro don saita wannan na'urar. Duba Jagorar Mai Amfani Pro Mawaƙin (ctrl4.co/cpro-ug) don cikakkun bayanai.

Gargadi
Tsanaki! Don rage haɗarin girgizar lantarki, kar a bijirar da wannan na'urar ga ruwan sama ko danshi.
Tsanaki! A cikin yanayi na yau da kullun akan USB, software tana kashe fitarwa. Idan na'urar USB da aka makala ba ta bayyana tana kunnawa ba, cire na'urar USB daga mai sarrafawa.

Ƙayyadaddun bayanai

	Abubuwan da aka shigar / abubuwan fitarwa
Fitar bidiyo	1 bidiyo fita-1 HDMI
Bidiyo	HDMI 2.0a; 3840×2160 @ 60Hz (4K); HDCP 2.2 da HDCP 1.4
Audio fita	4 audio out — 1 HDMI, 2 × 3.5 mm sitiriyo audio, 1 dijital coax
Tsarin siginar dijital	Dijital coax in — matakin shigarwa Audio Out 1/2 (analog) — Ma'auni, ƙara, ƙara, 6-band PEQ, mono/stereo, siginar gwaji, bebe Dijital coax out — Volume, bebe
Tsarin sake kunnawa audio	AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA
Sauti a ciki	1 audio in-1 dijital coax audio in
sake kunnawa mai ƙarfi mai ƙarfi	Har zuwa 192 kHz / 24 bit
	Cibiyar sadarwa
Ethernet	2.
Wi-FI	Akwai tare da adaftar Wi-Fi na USB
ZigBee Pro	802.15.4
ZigBee eriya	Mai haɗa SMA na baya
Z-Wave	Z-Wave 700 jerin
eriya Z-Wave	Mai haɗa SMA na baya
tashar USB	1 USB 3.0 tashar jiragen ruwa - 500mA
	Sarrafa
IR waje	6 IR fita - 5V 27mA max fitarwa
IR kama	1 mai karɓar IR-gaba, 20-60 kHz
Serial fita	3 serial out (an raba tare da IR out 1-3)
Shigar da lamba	1 × 2-30V DC shigarwar, 12V DC 125mA max fitarwa
Relay	1 × relay fitarwa-AC: 36V, 2A max a fadin gudun ba da sanda; DC: 24V, 2A max a fadin relay
	Ƙarfi
Bukatun wutar lantarki	100-240 VAC, 60/50Hz ko PoE+
Amfanin wutar lantarki	Matsakaicin: 18W, 61 BTUs/ hour Mara aiki: 12W, 41 BTUs/h
	Sauran
Yanayin aiki	32˚F × 104˚F (0˚C × 40˚C)
Yanayin ajiya	4˚F × 158˚F (-20˚C × 70˚C)
Girma (H × W × D)	1.13 × 7.5 × 5.0 ″ (29 × 191 × 127 mm)
Nauyi	1.2 lb (0.54 kg)
Nauyin jigilar kaya	2.2 lb (1.0 kg)

Ƙarin albarkatu

Ana samun albarkatu masu zuwa don ƙarin tallafi.

Taimako da bayani na Series4 CORE: ctrl4.co/core

Snap One Tech Community da Ilmi: tech.control4.com
Control4 Tallafin Fasaha

Sarrafa4 website: www.control4.com

Gaba view

Ayyukan LED-Ayyukan LED yana nuna lokacin da mai sarrafawa ke yawo da sauti.
Tagar IR — IR blaster da mai karɓar IR don koyan lambobin IR.

Tsanaki LED-Wannan LED yana nuna ja mai ƙarfi, sa'an nan kuma ya lumshe shuɗi yayin aikin taya. Lura: LED ɗin Tsanaki yana ƙyalli orange yayin aikin dawo da masana'anta. Duba "Sake saitin zuwa saitunan masana'anta" a cikin wannan takaddar.
LED Link - LED yana nuna cewa an gano mai sarrafawa a cikin Control4

Haɗin LED - LED yana nuna cewa an gano mai sarrafawa a cikin aikin Mawaƙin Control4 kuma yana sadarwa tare da Darakta.
LED Power - LED mai shuɗi yana nuna cewa ikon AC yana nan. Mai sarrafawa yana kunna kai tsaye bayan an yi amfani da wutar lantarki a kai.

Baya view

Tashar wutar lantarki - Mai haɗa wutar lantarki na IEC 60320-C5.

Tuntuɓi da relay- Haɗa na'urar relay guda ɗaya da na'urar firikwensin lamba ɗaya zuwa mai haɗin toshe tasha. Haɗin Relay sune COM, NC (a rufe yawanci), da NO (a buɗewa kullum). Haɗin firikwensin lamba sune +12, SIG (sigina), da GND (ƙasa).
SERIAL da IR OUT — jacks na mm 3.5 na har zuwa masu fitar da IR guda huɗu ko don haɗewar masu fitar da IR da na'urorin serial. Ana iya saita tashoshin jiragen ruwa 1 da 2 don kansu don sarrafa serial (don sarrafa masu karɓa ko masu canza diski) ko don sarrafa IR. Dubi "Haɗa tashoshin jiragen ruwa na IR / serial ports" a cikin wannan takarda don ƙarin bayani.
DIGITAL COAX IN- Yana ba da damar raba sauti ta hanyar sadarwar gida zuwa wasu na'urorin Control4.
AUDIO FITAR 1/2-Fitar da sauti da aka raba daga wasu na'urorin Control4 ko daga kafofin jiwuwa na dijital (kafofin watsa labarai na gida ko sabis na yawo na dijital).
DIGITAL COAX OUT — Fitar da sautin da aka raba daga wasu na'urori na Control4 ko daga kafofin jiwuwa na dijital (kafofin watsa labarai na gida ko sabis na yawo na dijital kamar).
USB-Tashoshi ɗaya don kebul na USB na waje (kamar sandar USB da aka tsara FAT32). Dubi "Kafa na'urorin ajiya na waje" a cikin wannan takaddar.
HDMI OUT - tashar tashar HDMI don nuna menus kewayawa. Hakanan ana samun sauti ta hanyar HDMI.
Maɓallin ID da SAKESET — ana danna maɓallin ID don gano na'urar a cikin Mawaƙin Pro. Maɓallin ID akan CORE-3 shima LED ne wanda ke nuna ra'ayoyin masu amfani a cikin ma'aikata maidowa. Ana amfani da RESET pinhole don sake saiti ko masana'anta maido da mai sarrafawa.
ZWAVE — mai haɗin eriya don rediyon Z-Wave.
ENET OUT-RJ-45 jack don haɗin Ethernet fita. Yana aiki azaman mai sauya hanyar sadarwa ta tashar jiragen ruwa 2 tare da ENET/POE+ IN jack.
ENET/POE+ IN-RJ-45 jack don haɗin 10/100/1000BaseT Ethernet. Hakanan zai iya kunna mai sarrafawa tare da PoE+.
ZIGBEE-Mai haɗa eriya don rediyon Zigbee.

umarnin shigarwa

Don shigar da mai sarrafawa:

Tabbatar cewa cibiyar sadarwar ho me tana cikin wurin kafin fara saitin tsarin. Ana buƙatar haɗin Ethernet zuwa cibiyar sadarwar gida don saitin. Mai sarrafawa yana buƙatar haɗin cibiyar sadarwa don amfani da duk fasalulluka kamar yadda aka tsara. Bayan saitin farko, Ethernet (an shawarta) ko Wi-Fi ana iya amfani da shi don haɗa mai sarrafawa zuwa webtushen bayanan kafofin watsa labaru, sadarwa tare da wasu na'urorin IP a cikin gida, da samun damar sabunta tsarin Control4.
Dutsen mai sarrafawa kusa da na'urorin gida da kuke buƙatar sarrafawa. Ana iya ɓoye mai sarrafawa a bayan TV, a ɗaura shi akan bango, sanya shi a cikin tarkace, ko kuma a jera shi a kan shiryayye. Ana siyar da Bracket-3 Wall-Mount Bracket daban kuma an tsara shi don sauƙin shigarwa na mai sarrafa CORE-3 a bayan TV ko a bango.
Haɗa eriya zuwa masu haɗin eriyar ZIGBEE da ZWAVE.
Haɗa mai sarrafawa zuwa cibiyar sadarwa.
- Ethernet-Don haɗawa ta amfani da haɗin Ethernet, haɗa kebul na cibiyar sadarwa zuwa tashar tashar RJ-45 mai sarrafawa (mai lakabin “Ethernet”) kuma cikin tashar cibiyar sadarwa akan bango ko a wurin sauya hanyar sadarwa.
- Wi-Fi-Don haɗawa ta amfani da Wi-Fi, fara haɗa naúrar zuwa Ethernet, haɗa adaftar Wi-Fi zuwa tashar USB, sannan yi amfani da Mawallafin Pro System Manager don sake saita naúrar don WiFi.
Haɗa na'urorin tsarin. Haɗa IR da na'urorin serial kamar yadda aka bayyana a cikin "Haɗin tashar jiragen ruwa na IR / serial ports" da "Kafa IR emitters."

Saita kowace na'urar ma'ajiya ta waje kamar yadda aka bayyana a cikin "Shigar da na'urorin ajiya na waje" a cikin wannan takaddar.
Idan ana amfani da wutar AC, haɗa igiyar wutar lantarki zuwa tashar wutar lantarkin mai sarrafawa sannan cikin mashin wutar lantarki.

Haɗa tashoshin jiragen ruwa na IR / serial ports (na zaɓi)

Mai sarrafawa yana ba da tashoshin IR guda huɗu, kuma tashoshin 1 da 2 za a iya sake daidaita su da kansu don sadarwar serial. Idan ba a yi amfani da su don serial ba, ana iya amfani da su don IR. Haɗa serial na'urar zuwa mai sarrafawa ta amfani da Control4 3.5 mm-to-DB9 Serial Cable (C4-CBL3.5-DB9B, sayarwa daban).

Serial tashoshin jiragen ruwa suna goyan bayan ƙimar baud tsakanin 1200 zuwa 115200 baud don m har ma da daidaito. Serial tashoshin jiragen ruwa ba su goyi bayan sarrafa kwararar hardware.
Dubi labarin Ilimi #268 (dealer.control4.com/dealer/knowledgebase/ article/268) don zane-zane.
Don saita tashar jiragen ruwa don serial ko IR, yi hanyoyin haɗin da suka dace a cikin aikin ku ta amfani da Mawaƙin Pro. Duba Jagorar Mai Amfani Pro Mawaƙi don cikakkun bayanai.
Lura: Za'a iya saita tashoshin jiragen ruwa na serial azaman madaidaiciya-ta hanyar ko mara amfani tare da Mawaƙin Pro. Serial ports ta tsohuwa ana saita su kai tsaye ta hanyar kuma ana iya canza su a cikin Mawaƙi ta zaɓi Enable Null-Modem Serial Port (1 ko 2).

Kafa IR emitters

Tsarin ku na iya ƙunsar samfuran ɓangare na uku waɗanda ake sarrafawa ta hanyar umarnin IR.

Haɗa ɗaya daga cikin abubuwan da aka haɗa na IR zuwa tashar IR OUT akan mai sarrafawa.
Sanya ƙarshen emitter na sanda akan mai karɓar IR akan na'urar Blu-ray, TV, ko sauran na'urar da aka yi niyya don fitar da siginar IR daga mai sarrafawa zuwa maƙasudin. Saita na'urorin ma'aji na waje (na zaɓi) Kuna iya adanawa da samun dama ga kafofin watsa labarai daga na'urar ma'aji ta waje, misaliample, network
rumbun kwamfutarka ko na'urar ƙwaƙwalwar USB, ta hanyar haɗa kebul ɗin USB zuwa tashar USB da daidaitawa ko bincika kafofin watsa labarai a cikin Composer Pro.
Lura: Muna goyan bayan kebul na USB masu ƙarfi kawai ko sandunan USB masu ƙarfi. Kebul na USB masu iko da kai ba su da tallafi.
Lura: Lokacin amfani da na'urorin ajiya na USB akan mai sarrafa CORE-3, zaku iya amfani da bangare ɗaya kawai tare da matsakaicin girman TB 2. Wannan iyakance kuma ya shafi ma'ajin USB akan wasu masu sarrafawa.

Bayanin direban mawaki Pro

Yi amfani da Ganowar atomatik da SDDP don ƙara direba zuwa aikin Mawaƙi. Duba Jagorar Mai Amfani Pro Mawaƙin (ctrl4.co/cpro-ug) don cikakkun bayanai.

Saitin OvrC da daidaitawa
OvrC yana ba ku sarrafa na'ura mai nisa, sanarwa na ainihin lokaci, da kuma kulawar abokin ciniki, tun daga kwamfutarku ko na'urar hannu. Saita shine toshe-da-wasa, ba tare da tura tashar jiragen ruwa ko adireshin DDNS da ake buƙata ba. Don ƙara wannan na'urar zuwa asusun OvrC:

Haɗa mai sarrafa CORE-3 zuwa Intanet.

Kewaya zuwa OvrC (www.ovrc.com) kuma shiga cikin asusunku.
Ƙara na'urar (adireshin MAC da Sabis Tag lambobi da ake buƙata don tantancewa).

Haɗa tashar sadarwa
CORE-3 yana ba da tashar sadarwa guda ɗaya akan toshe tasha mai haɗawa (+12, SIG, GRD). Duba tsohonampLes kasa don koyon yadda ake haɗa na'urori daban-daban zuwa tashar sadarwa. Waya lambar sadarwa zuwa firikwensin wanda shima yana buƙatar iko (Motion Sensor)

Wayar da lambar sadarwa zuwa busassun firikwensin lamba (Kofa firikwensin lamba)

Wayar da lambar sadarwa zuwa firikwensin da ke aiki daga waje (Driveway firikwensin)

Haɗa tashar jiragen ruwa
CORE-3 yana ba da tashar jiragen ruwa na relay guda ɗaya akan katangar tasha da aka haɗa.Duba tsohonampLes kasa don koyi yanzu don haɗa na'urori daban-daban zuwa tashar jiragen ruwa na relay. Waya relay zuwa na'urar relay guda ɗaya, yawanci buɗewa (Fireplace)

Waya gudun ba da sanda zuwa na'urar relay mai dual (makafi)

Waya gudun ba da sanda da wuta daga lamba, yawanci rufe (Ampmai kunna wuta)

Shirya matsala

Sake saita zuwa saitunan masana'anta
Tsanaki! Tsarin dawo da masana'anta zai cire aikin Mawaƙin. Don mayar da mai sarrafawa zuwa hoton tsohuwar masana'anta:

Saka ƙarshen shirin takarda ɗaya cikin ƙaramin rami a bayan mai sarrafawa mai lakabin RESET.
Latsa ka riƙe maɓallin SAKESET. Mai sarrafawa yana sake saiti kuma maɓallin ID ya canza zuwa ja mai ƙarfi.
Riƙe maɓallin har sai ID ɗin ya haskaka orange sau biyu. Wannan ya kamata ya ɗauki daƙiƙa biyar zuwa bakwai. Maɓallin ID yana walƙiya orange yayin da masana'anta ke aiki. Lokacin da ya cika, maɓallin ID yana kashe kuma wutar lantarki na na'urar tana sake sake sakewa lokaci guda don kammala aikin dawo da masana'anta.
Lura: Yayin aikin sake saiti, maɓallin ID yana ba da ra'ayi iri ɗaya kamar LED Caution a gaban mai sarrafawa. Zagayowar wutar lantarki mai sarrafawa
1. Latsa ka riƙe maɓallin ID na daƙiƙa biyar. Mai sarrafawa yana kashewa yana kunnawa. Sake saita saitunan cibiyar sadarwa Don sake saita saitunan cibiyar sadarwar mai sarrafawa zuwa tsoho:
2. Cire haɗin wuta zuwa mai sarrafawa.
3. Yayin latsawa da riƙe maɓallin ID a bayan mai sarrafawa, iko akan mai sarrafawa.
4. Riƙe maɓallin ID har sai maɓallin ID ya zama orange mai ƙarfi kuma Link da LEDs masu ƙarfi sun kasance shuɗi mai ƙarfi, sannan kuma nan da nan saki maɓallin. mai sarrafawa.

Bayanin halin LED

An kunna kawai
An yi lodin bootloader

An yi lodin kwaya
Duban sake saitin hanyar sadarwa
Ana ci gaba da dawo da masana'anta

Mayar da masana'anta ta kasa
An haɗa shi da Darakta
Ana kunna sauti

Karin taimako
Domin sabuwar sigar wannan takarda da zuwa view ƙarin kayan, buɗe URL kasa ko duba lambar QR akan na'urar da zata iya view PDFs.
Doka, Garanti, da Ka'idoji/Bayanin Tsaro Ziyara snapone.com/doka don cikakkun bayanai.

Muhimman Umarnin Tsaro

Consignes de sécurité muhimmi Karanta umarnin aminci kafin amfani da wannan samfur.

Karanta waɗannan umarnin.

A kiyaye waɗannan umarnin.
Ku kula da duk gargaɗin.
Bi duk umarnin.

Kar a yi amfani da wannan na'urar kusa da ruwa.
Tsaftace kawai da bushe bushe.
Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.

Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
Yi amfani da haɗe-haɗe-haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa.

na’urar ta lalace ta kowace hanya, kamar igiyar samar da wutar lantarki ko toshe ta lalace, ruwa ya zube ko abubuwa sun fada cikin na’urar, na’urar ta gamu da ruwan sama ko danshi, ba ta aiki yadda ya kamata, ko kuma an jefar da ita. .
Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
Wannan kayan aikin yana amfani da wutar AC wanda za'a iya fuskantar hawan wutar lantarki, yawanci masu wucewar walƙiya waɗanda ke da matuƙar ɓarna ga na'urorin tasha na abokin ciniki da ke da alaƙa da tushen wutar AC. Garanti na wannan kayan aiki baya rufe lalacewa ta hanyar hawan wutar lantarki ko na walƙiya. Don rage haɗarin wannan kayan aiki ya lalace ana ba da shawarar cewa abokin ciniki yayi la'akari da shigar da mai kamawa. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.

Don cire haɗin wutar naúrar gaba ɗaya daga na'urorin AC, cire igiyar wutar lantarki daga na'ura mai ba da hanya tsakanin hanyoyin sadarwa da/ko kashe na'urar da'ira. Don sake haɗa wuta, kunna mai watsewar kewayawa bin duk umarnin aminci da jagororin. Mai watsewar kewayawa zai kasance mai sauƙin isa.
Wannan samfurin ya dogara da shigar da ginin don kariyar gajeriyar hanya (overcurrent). Tabbatar cewa na'urar kariya ba ta fi girma: 20A ba.
GARGADI - Majiyoyi masu iko, Groundinging, PLarization Wannan samfurin yana buƙatar mafita madaidaiciya don aminci. An ƙera wannan filogi don sakawa a cikin tashar NEMA 5-15 (ƙasa uku) kawai. Kar a tilasta filogi zuwa wurin da ba a tsara shi don karɓa ba. Kada a taɓa wargaza filogi ko musanya igiyar wutar lantarki, kuma kar a yi ƙoƙarin kayar da fasalin ƙasa ta amfani da adaftar 3-to-2. Idan kuna da tambaya game da ƙaddamar da ƙasa, tuntuɓi kamfanin wutar lantarki na gida ko ƙwararren ma'aikacin lantarki. Idan na'urar saman rufin kamar tasa tauraron dan adam ta haɗu da samfurin, tabbatar da cewa wayoyi na na'urorin suna ƙasa da kyau. Ana iya amfani da ma'anar haɗin kai don samar da wuri na gama gari ga wasu kayan aiki. Wannan wurin haɗin kai zai iya ɗaukar mafi ƙarancin waya AWG 12 kuma yakamata a haɗa shi ta amfani da kayan aikin da ake buƙata da aka ƙayyade ta sauran wurin haɗin gwiwa. Da fatan za a yi amfani da ƙarewa don kayan aikin ku daidai da ƙa'idodin hukumar gida.

Sanarwa - Don amfanin cikin gida kawai, abubuwan ciki ba a rufe su daga muhallin. Ana iya amfani da na'urar ne kawai a wani ƙayyadadden wuri kamar cibiyar sadarwa, ko ɗakin kwamfuta da aka keɓe. Lokacin da kuka shigar da na'urar, tabbatar da cewa ƙwararren mutum ne ya tabbatar da haɗin ƙasa mai karewa na soket-outlet. Ya dace da shigarwa a cikin ɗakunan fasahar bayanai daidai da Mataki na 645 na National Electrical Code da NFP 75.
Wannan samfurin na iya tsoma baki tare da kayan lantarki kamar masu rikodin kaset, saitin TV, rediyo, kwamfutoci, da murhun microwave idan an sanya su a kusa.
Kada a taɓa tura abubuwa kowane iri cikin wannan samfur ta ramukan majalisar saboda suna iya taɓa voltage maki ko gajarta sassa waɗanda zasu iya haifar da gobara ko girgizawar lantarki.

GARGADI – Babu sassa masu hidimar mai amfani a ciki. Idan samfurin baya aiki da kyau, kar a cire kowane ɓangaren sashin (rufin, da sauransu) don gyarawa. Cire naúrar kuma tuntuɓi sashin garanti na littafin mai shi.
HANKALI: Kamar yadda yake tare da duk batura, akwai haɗarin fashewa ko rauni na mutum idan an maye gurbin baturin da nau'in da ba daidai ba. Zubar da baturin da aka yi amfani da shi bisa ga umarnin mai yin baturi da jagororin muhalli masu dacewa. Kada a buɗe, huda ko ƙone baturin, ko baje shi zuwa kayan aiki, danshi, ruwa, wuta ko zafi sama da 54°C ko 130F.
PoE yayi la'akari da Muhalli na hanyar sadarwa 0 a kowane IEC TR62101, don haka ana iya ɗaukar da'irar ITE masu haɗin gwiwa kamar ES1. Umurnin shigarwa sun bayyana a sarari cewa ITE za a haɗa shi zuwa cibiyoyin sadarwar PoE kawai ba tare da tuƙi zuwa shukar waje ba.

Tsanaki: Mai Canjin gani da aka yi amfani da shi tare da wannan samfurin yakamata yayi amfani da UL da aka jera, da Laser Class I, 3.3 Vdc.

FCC Sashe na 15, Sashe na B & IC Bayanin Tsangwamar Fitsararriyar Fitowa Ba da Niyya ba

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da ake sarrafa kayan aiki a cikin shigarwar mazauni. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

Sake daidaitawa ko matsar da eriya mai karɓa.
Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aikin da ba a so. MUHIMMI! Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin.

Kimiyyar Ƙirƙirar Kimiyya da Ci gaban Tattalin Arziƙi (ISED) Bayanin Tsangwamar Fitar da Haɓaka Ba da Niyya ba
Wannan na'urar tana ƙunshe da masu watsa (s)/masu karɓa (s) waɗanda ba su da lasisi waɗanda ke bin Innovation, Kimiyya da Ci gaban Tattalin Arziƙi RSS(s) waɗanda ba su da lasisin Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

Wannan na'urar bazai haifar da tsangwama ba
Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar

FCC Sashe na 15, Karamin Sashe na C / RSS-247 Bayanin Tsangwama Na Gayyata
An tabbatar da yarda da wannan kayan aikin ta waɗannan lambobin takaddun shaida waɗanda aka sanya akan kayan aikin:
Sanarwa: Kalmar "FCC ID:" da "IC:" kafin lambar takaddun shaida ta nuna cewa FCC da masana'antun Kanada sun cika ƙayyadaddun fasaha.

Ana iya sanya wannan samfurin cikin sabis a duk ƙasashe membobin EU, Ƙungiyar Kasuwancin Kasuwanci ta Turai (EFTA) da ƙasashen EU masu takara ba tare da wani ƙuntatawa ba.

An jera mitar da matsakaicin ƙarfin watsawa a cikin EU kamar ƙasa:

2412 – 2472 MHz: ?$dBm
5180 – 5240 MHz: ?$dBm

WLAN 5GHz:
Ayyuka a cikin rukunin 5.15-5.35GHz an iyakance su zuwa amfani cikin gida kawai.

Ƙasar Ingila (Birtaniya).
An tabbatar da yarda da wannan kayan aiki ta tambari mai zuwa wanda aka sanya akan lakabin ID na samfur wanda aka sanya a ƙasan kayan aikin. Cikakkun rubutu na Bayanin Daidaitawa na Burtaniya (DoC) yana samuwa akan tsarin webshafi:

Sake yin amfani da su
Snap Daya ya fahimci cewa sadaukarwa ga muhalli yana da mahimmanci don rayuwar lafiya da ci gaba mai dorewa ga al'ummomi masu zuwa. Mun himmatu wajen tallafawa ƙa'idodin muhalli, dokoki, da umarni waɗanda al'ummomi da ƙasashe daban-daban suka sanya su a cikin abubuwan da suka shafi muhalli. Ana wakilta wannan alƙawarin ta hanyar haɗa sabbin fasahohi tare da ingantattun shawarwarin kasuwancin muhalli.

Yarda da WEEE
Snap One ya himmatu wajen biyan duk buƙatun umarnin Waste Electrical and Electronic Equipment (WEEE) umarnin (2012/19/EC). Umarnin na WEEE yana buƙatar masu kera kayan lantarki da na lantarki waɗanda ke siyarwa a cikin ƙasashen EU: sanya wa kayan aikin su alama don sanar da abokan ciniki cewa yana buƙatar sake yin fa'ida, da samar da hanyar da za a zubar da samfuran su yadda ya kamata ko sake yin fa'ida a ƙarshen samfuran su. tsawon rayuwa. Don tarin ko sake yin amfani da samfuran Snap One, da fatan za a tuntuɓi wakilin ku na Snap One na gida ko dila.

Yarjejeniyar Australiya & New Zealand
An tabbatar da yarda da wannan kayan aiki ta tambari mai zuwa wanda aka sanya akan lakabin ID na samfur wanda aka sanya a ƙasan kayan aikin.

Takardu / Albarkatu

Control4 C4-CORE3 Core-3 Hub da Mai Sarrafa [pdf] Jagoran Shigarwa
CORE3, 2AJAC-CORE3, 2AJACCORE3, C4-CORE3 Core-3 Hub da Mai sarrafawa, C4-CORE3, Core-3 Hub da Mai sarrafawa

Magana

Manual mai amfani

Control4 C4-CORE3 Core-3 Hub da Mai Sarrafa

Gabatarwa