CMS SERIES COLUMNS
Kafaffen Ginshikan Tsawon Daidaitacce
RA'AYI
Milestone AV Technologies da ƙungiyoyi masu haɗin gwiwa da ƙungiyoyi (tare "Milestone"), suna da niyyar yin wannan littafin ingantacce kuma cikakke. Koyaya, Milestone ba ya da'awar cewa bayanin da ke ciki ya ƙunshi duk cikakkun bayanai, yanayi, ko bambancin, kuma ba ya samar da kowane yanayi mai yiwuwa dangane da shigarwa ko amfani da wannan samfurin. Bayanin da ke cikin wannan takaddar yana iya canzawa ba tare da sanarwa ko fargabar kowane irin abu ba. Milestone ba sa wakilci ko garanti, bayyana ko ma'ana, game da bayanin da ke ciki. Milestone baya ɗaukar nauyin daidaito, cikawa, ko isasshen bayanan da ke cikin wannan takaddar.
Chief® alamar kasuwanci ce mai rijista ta Milestone AV Technologies.
An kiyaye duk haƙƙoƙi.
BAYANI
TSARON DARAJO: TSARIN DUNIYA shine babban kayan aikin Cif wanda aka haɗa kayan haɗi da / ko kayan haɗe.
ACCESORY: ACCESSORY shine babban kayan Cif wanda yake haɗe da samfurin Cif na farko, kuma yana iya samun abin haɗe ko saiti akan sa.
KYAUTA: KYAUTA abu ne na audiovisual da aka tsara don haɗewa ko hutawa akan kayan haɗi ko hawa tsarin kamar kyamarar bidiyo, CPU, allo, nuni, majigi, da sauransu.
GARGADI: GARGADI yana fadakar da kai game da yuwuwar samun mummunan rauni ko mutuwa idan ba ka bi umarnin ba.
HANKALI: HATTARA yana faɗakar da kai game da yiwuwar lalacewa ko lalata kayan aiki idan ba ku bi umarnin da ya dace ba.
MUHIMMAN UMURNIN TSIRA
GARGADI: Rashin karantawa, fahimta sosai, da kuma bin duk umarnin na iya haifar da mummunan rauni na mutum, lalacewar kayan aiki, ko ɓata garantin masana'anta! Hakkin mai sakawa ne don tabbatar da cewa an haɗa dukkan kayan haɗi kuma an girka su ta amfani da umarnin da aka bayar.
GARGADI: Rashin samar da isasshen ƙarfin tsari don wannan kayan haɗi na iya haifar da mummunan rauni na mutum ko lalacewar kayan aiki! Hakkin mai sakawa ne ya tabbata cewa tsarin da aka haɗe wannan kayan haɗi na iya tallafawa sau biyar na nauyin haɗin dukkan kayan aiki sau biyar. Thearfafa tsarin kamar yadda ake buƙata kafin shigar da kayan haɗi.
GARGADI: Exara ƙarfin nauyi na iya haifar da mummunan rauni na mutum ko lalacewar kayan aiki! Hakkin mai sakawa ne ya tabbatar cewa nauyin haɗin dukkan abubuwan haɗin da aka haɗo a cikin Shafin Fadada Tsarin CMS bai wuce lbs 500 ba (kilogirama 226).
• capacityarfin nauyi na CMS Series Extension Columns na iya zama LIMITED zuwa mafi ƙarancin nauyin nauyi na kowane ɓangaren, kayan haɗi ko
hawa tsarin amfani da wannan m.
GARGADI: Kada kayi amfani da wannan samfurin a waje.
GARGADI: Yi amfani da wannan kayan haɗi kawai don amfanin da aka nufa kamar yadda aka bayyana a waɗannan umarnin. Kada kayi amfani da haɗe-haɗe waɗanda masana'antun ba su ba da shawarar ba.
GARGADI: Kada kayi aiki da wannan kayan haɗi idan ya lalace. Maida kayan haɗi zuwa cibiyar sabis don gwaji da gyara.
NOTE: An Lissafi ginshiƙan jerin CMS jerin tsawaita don amfani tare da duk jerin jerin manyan faranti na rufi da hawa da aka ƙayyade don amfani tare da 1-1 / 2 ″ NPT bin ANSI / ASME B1.20.1 (Jadawalin 40, 0.154 ″ mafi ƙarancin kauri, ƙarfe ko aluminium - ASTM B221) ginshiƙai masu tsawo da UL da aka jera a cikin kayan haɗin adaftan mai rufin CMS380. Ginshikan fadada jerin CMS sun dace da matsakaicin nauyin lbs 500 (kilogirama 226).
–AJI KUNNAN MAGANGANUN-
GASKIYA GASKIYA KARAN KYAUTA
MUHIMMI!: Hanyar da ke biye ta ɗauka cewa an ɗora farantin siliki / adafta (ba a haɗa shi ba) da kyau bayan umarnin da aka bayar tare da kwanon rufi / adaftan.
SAURARA: An yi niyyar amfani da Babban kayan haɗi da hawa.
1. Sanya 1-1 / 2 ″ NPT zaren zaren (A) cikin farantin / adafta (Duba hoto na 1). Tightarfafa shafi sosai.
• Tabbatar da shafi (A) shigar da cikakkun zaren cikin farantin / adafta.
• Tabbatar da buɗe hanyar buɗe kebul ya juya zuwa inda ake so (shigar zaɓi)
NOTE: Bude hanyar buɗe waya da aka bayar akan ginshiƙai 9 ″ ko ya fi tsayi (229mm) a tsayi. Saƙon zaɓi wanda aka yi amfani dashi lokacin da igiyoyi dole su fita ƙasa da farantin / adaftan.
2. Amintaccen shafi (A) ta hanyar tsaurara saiti a cikin farantin / adafta (Duba hoto 1).
SAURARA: Maɓallin Hex kuma saita dunƙulen da aka bayar tare da farantin / adafta.
GARGADI: Fiye da nauyin nauyi na iya haifar da raunin mutum ko lalacewar kayan aikin! Hakkin mai sakawa ne don tabbatar da haɗin nauyin duk abubuwan haɗin da aka haɗe zuwa Tsarin Kundin Tsarin CMS bai wuce lbs 500 ba (kilogiram 226).
• capacityarfin nauyi na CMS Series Extension Columns na iya zama LIMITED zuwa mafi ƙarancin nauyin nauyi na kowane ɓangaren ko kayan haɗi da aka yi amfani da su a cikin tsarin hawa.
3. Shigar da amintaccen majigi / nuni dutsen (ba a hada shi ba) zuwa kasan karshen shafi (A) bin umarnin da aka hada tare da dutsen.
CIGABA DA KARAN CIGABA DA KARANTA KWANA
MUHIMMANCI! : Hanyar da ke biye tana ɗauka cewa an ɗora farantin / adaftan (ba a haɗa shi ba) da kyau bayan umarnin da aka bayar tare da farantin silin ɗin / adaftan.
SAURARA: An yi niyyar amfani da Babban kayan haɗi da hawa.
1. Sanya 1-1 / 2 ″ NPT zaren zare (A ko B, kamar yadda ya dace) a cikin farantin / adafta (Duba Hoto na 2). Tightarfafa shafi sosai.
• Tabbatar da shafi (A ko B, kamar yadda yake zartarwa) shigar da zaren huɗu cike cikin farantin / adafta.
• Tabbatar da buɗe hanyar buɗe kebul ya juya zuwa matsayin da ake so (shigar zaɓi, shafi (A)).
NOTE: Bude hanyar buɗe waya da aka bayar akan ginshiƙai 9 ″ ko ya fi tsayi (229mm) a tsayi. Zaɓin zaɓi wanda aka yi amfani dashi lokacin da igiyoyi dole su fita ƙasa da farantin / adafta.
2. Amintaccen shafi (A ko B, kamar yadda ya dace) ta matattarar dunƙule a cikin farantin / adafta (Duba Hoto na 2).
NOTE: Maɓallin Hex da ƙuƙwalwar da aka bayar tare da farantin / adafta.
3. Shigar da shafi na mating (A ko B, kamar yadda ya dace) (Duba hoto na 2).
4. Yin amfani da madanni (J), saka sako-sako (C) ta hanyan wanki (D), mai wankin lebur (E), da kuma shafi na waje (B) a cikin ramin gyara a layin ciki (A) (Duba hoto na 3).
NOTE: An samarda ramuka masu gyara guda biyu a ginshikai 6 ″ ko sun fi tsayi (152mm) a tsayi. Ko dai za'a iya amfani da ramin daidaitawa don samar da haɓakar daidaitawa 1 ″ (25mm).
NOTE: Zaɓin zaɓi kamar haka; ba a nuna ba.
5. Daidaita shafi (A ko B, kamar yadda ya dace) zuwa tsayin da ake so, sannan juyawa da kullewa cikin wuri (Duba hoto na 3).
SAURARA: Duk wani makulli yana iya amfani dashi dan samarda karin 2 ″ (51mm).
6. Sanya dunƙule (C) ta amfani da madanni (J) (Duba hoto na 3).
7. Shigar da tsaurara matakan da aka kafa (misali (F) ko tsaro (H), yadda ake so) ta amfani da maɓallin (G) (Duba hoto na 4).
NOTE: Zabi shigarwa kama; ba a nuna ba.
GARGADI: Fiye da nauyin nauyi na iya haifar da mummunan rauni na mutum ko lalacewar kayan aiki! Hakkin mai sakawa ne ya tabbatar cewa nauyin haɗin dukkan abubuwan haɗin da aka haɗe a cikin Shafin Fadada Tsarin CMS bai wuce lbs 500 ba (kilogirama 226).
• capacityarfin nauyi na CMS Series Extension Columns na iya zama LIMITED zuwa mafi ƙarancin nauyin nauyi na kowane ɓangaren, kayan haɗi ko tsarin hawa da aka yi amfani da shi tare da wannan kayan haɗi.
8. Shigar da amintaccen majigi / dutsen nuni (ba a hada shi ba) zuwa kasan karshen shafi (A ko B, kamar yadda ya dace) bin umarnin da aka hada da tsauni.
Babban, rukunin samfuran Milestone AV Technologies
8800-002605 Rev01 © 2016 Milestone AV Technologies www.milestone.com 12/16
Amurka / Duniya
Hanyar 6436 City West Parkway, Eden Prairie, MN 55344
P 800.582.6480/952.225.6000
F 877.894.6918 / 952.894.6918
Turai
Wani Franklinstraat 14, 6003 DK Weed, Netherlands
P + 31 (0) 495 580 852
F + 31 (0) 495 580 845
Asiya Pacific
Ofishin Lamba 918 akan 9 / F, Shatin Galleria 18-24 Shan Mei Street Fotan, Shatin, Hong Kong
Bayani na 852
F 852 2145 4477
Takardu / Albarkatu
 |
CHIEF Kafaffen ginshiƙan Tsawon Tsawon Madaidaici [pdf] Jagoran Shigarwa Kafaffen ginshiƙan Tsawon Tsawon Matsala, CMS SERIES COLUUMNS, 8800-002605 |
