Kumfa WC-FRAME002 Scudo WC Firam ɗin Rijiyar Wuta

SASHE NA LITTAFIN

Hankali! Kafin amfani, kunna ruwan kuma tsaftace tsattsauran ra'ayi da laka a cikin rijiyar idan akwai.

GIRMA

SHIGA

1. Haɗa firam ɗin gyarawa zuwa tanki a daidai matsayi, Kamar yadda yake cikin Hoto 1
   • Haɗa: Tura saukar da firam ɗin gyarawa, kuma kiyaye ramin riƙe maɓallin sama.
   • Warke: Danna maɓallin zagaye da aka ɗaga, sannan ka tura shaharar gyarawa sama.
2. Dunƙule sassan ƙarfe na kusurwa, kusoshi (kowane 2pcs), hex goro da mai wanki (kowane 2pcs) zuwa firam ɗin ƙarfe kuma gyara tam.
3. Sake sukukulan 2 akan firam ɗin ƙarfen ƙafafu daidai-karfe ta maƙarƙashiya, kuma daidaita tsayin firam ɗin ƙarfen da ake buƙata, sannan ƙara ƙara 2 ɗin. Kamar hotuna 1 da 2
4. Sanya gwiwar gwiwar ƙasa mai digiri 90 a cikin shirin tsaro kuma kulle shirin a cikin rufaffiyar wurin da aka nuna ta “danna”.
5. Bincika bayan kwanon bayan gida da kuka zaɓa kuma ku auna tazarar tsakanin ramukan ƙulla don tabbatar da kusoshi. Saka bolts 2 (lambar sashe na 4) cikin daidaitattun ramukan ƙugiya a cikin tsarin firam ɗin bango a shirye don haɗa kwanon bayan gida.
6. Sanya firam ɗin a cikin majalisar kuma yi alama daidai wuraren gyare-gyaren da aka shirya don hakowa da screwing.
7. Yin amfani da madaidaitan ƙwanƙwasa ƙwanƙwasa & sukurori, amintar da majalisar a wurin da kuka zaɓa.
8. Kiyaye kit ɗin firam ɗin a cikin majalisar ta amfani da ƙorafin da aka kawo & gyarawa.
9. Shirya bututun ƙasa ta hanyar yanke shi zuwa tsayin daidai kuma saka shi a cikin firam ɗin da aka shirya don shigar da kwanon bayan gida.
10. Bayan haɗuwa da kammala kayan ado, cire murfin kariya
11. Yanke ƙarin sassan da aka ɗaga da ruwa.
12. Sake bawul ɗin kwana, kuma haɗa bututun shigarwa zuwa bawul ɗin kwana. Diamita na bawul: G1/2
13. Haɗa bututun injin ɗin zuwa gyare-gyaren da suka dace masu alama dama da hagu. Ɗaga shirin bazara don amintar da farantin ruwan cikin firam.
14. Tsare taro ta amfani da kusoshi da aka bayar.
15. Da zarar an shigar da bayan gida kuma an amintar da gaban panel, dace da ikon sarrafa ruwa.
16. Ragewa: Kamar yadda aka nuna, danna farantin maballin sama sannan ka ciro shi kamar yadda aka nuna a hoto na 2.
17. Shirya firam ɗin a shirye don karɓar kwanon bayan gida.
    1. Saka ƙasa duka kuma a zubar da bututu a cikin haɗin gwiwa.
    2. Auna tsayin bututun da ake buƙata kuma yi alama daidai.
    3. Daidaita bututun zuwa kwanon bayan gida.
    4. Alama bututu bisa ga girman.
    5. Bincika bututun biyu don tabbatar da tsayin daka daidai.
    6. Yanke bututu zuwa tsayi.
    7. Amfani da a file, chamfer ƙarshen bututu don ba da damar sauƙi na shigarwa cikin kwasfa.
    8. Lubrite bututu kafin saka su cikin kwasfa.
    9. Kamar yadda aka nuna, auna girman d. Rataya bayan gida zuwa ƙugiya guda 2 waɗanda ke buƙatar tsayin 25mm fiye da girman d.
    10. Kamar yadda aka nuna, saka bututun shigarwa madaidaiciya tare da hatimin roba a cikin rami mai shiga na bayan gida. Kamar yadda aka nuna na 2, saka bututun da ke kwance a cikin bututun magudanar ruwa a tsaye a bango.
        • Hankali! Tabbatar shigar da shigar a wuri.
    11. Ajiye kwanon bayan gida a kan sandunan kuma haɗa bututun sharar gida.
    12. Bincika matakin kuma ƙara kusoshi.

Takardu / Albarkatu

Kumfa WC-FRAME002 Scudo WC Firam ɗin Rijiyar Wuta [pdf] Jagoran Shigarwa WC-FRAME002 Scudo WC Frame Rijiyar Toilet, WC-FRAME002, Scudo WC Frame Rijiyar Toilet, Rijiyar Wuta ta Wuta, Rijiyar Toilet, Rijiya.

Magana

• Manual mai amfani