BOSE MA12 Panray Modular Line Array Lasifikar

Bayanin samfur

• Lasifikar Layin Array na Panaray Modular Layin Lasifikar lasifikar babbar fa'ida ce wacce aka ƙera don shigarwa na dindindin a cikin gida ko waje.
• Samfurin ya dace da duk buƙatun umarnin EU da Dokokin Compatibility Electromagnetic 2016.
• Ana iya samun cikakken bayanin daidaito a www.Bose.com/bibi.
• Lasifika yana da maƙallan maƙala waɗanda ke buƙatar ma'aunin awo 8.8 mafi ƙarancin manne. Yakamata a ƙara matsawa na'urar ta amfani da karfin juyi wanda bai wuce kilo 50 ba (mita 5.6 Newton).
• Ana ba da shawarar yin amfani da kayan aiki masu daraja, kuma yakamata a kiyaye ma'aunin nauyi na aminci na 10:1 lokacin haɗa lasifika zuwa saman hawa.

Umarnin Amfani da samfur

• Zaɓi matsayi da hanyar hawa daidai da ƙa'idodin ginin gida da ƙa'idodi. Tabbatar cewa saman hawa da hanyar makala lasifika zuwa saman yana da tsarin da zai iya tallafawa nauyin lasifikar.
• Don shigarwa na dindindin, haɗa lasifika zuwa madaukai ko wasu wuraren hawa don amfani na dogon lokaci ko na yanayi.
• Yi amfani da madaidaitan ma'auni kawai 8.8 mafi ƙaranci kuma ƙara matsa su ta amfani da karfin juyi wanda bai wuce 50 inch-pound (mita 5.6 Newton ba).
• Kar a yi ƙoƙarin canza maƙallan abin da aka makala ko sake zare su don ɗaukar kowane girman zaren ko nau'in, saboda wannan zai sa shigarwar ba ta da haɗari kuma ta lalata lasifikar har abada.
• Idan ya cancanta, zaku iya musanya masu wanki 1/4-inch da makullin wanki don na mm 6.
• Don inganta juriya ga jijjiga, ana ba da shawarar yin amfani da makullin wanki ko manne, kamar Loctite 242, wanda ke ba da damar tarwatsewa.

Don Dindindin Shigarwa

Wannan samfurin ya dace da duk buƙatun umarnin EU. Za a iya samun cikakken bayanin daidaito a: www.Bose.com/bibi. Wannan samfurin ya dace da duk ƙa'idodin daidaitawar Electromagnetic 2016 da duk sauran ƙa'idodin Burtaniya masu dacewa. Za a iya samun cikakken bayanin daidaito a: www.Bose.com/bibi.
GARGADI: Shigarwa na dindindin sun haɗa da haɗe lasifikar zuwa maƙalli ko wasu wuraren hawa don amfani na dogon lokaci ko na yanayi. Irin waɗannan abubuwan hawa, akai-akai a wuraren da ke sama, sun haɗa da haɗarin rauni na mutum idan ko dai tsarin hawan ko lasifikar abin da aka makala ya gaza. Bose® yana ba da maƙallan hawa na dindindin don amintaccen amfani da waɗannan lasifikar a cikin irin wannan shigarwar. Koyaya, mun fahimci wasu abubuwan shigarwa na iya yin kira don amfani da wasu, gyare-gyaren haɓakawa na musamman ko samfuran hawan Bose. Duk da yake Bose Corporation ba za a iya ɗaukar alhakin ƙirar da ta dace da amfani da tsarin hawan Bose ba, muna ba da jagororin masu zuwa don shigarwa na dindindin na kowane Bose® PANARAY® MA12/MA12EX Modular Line
Lasifikar Array: Zaɓi matsayi da hanyar hawa daidai da ƙa'idodin ginin gida da ƙa'idodi. Tabbatar cewa saman hawa da hanyar makala lasifika zuwa saman yana da tsarin da zai iya tallafawa nauyin lasifikar. Ana ba da shawarar rabon nauyin aminci na 10:1.

• Sami tsarin hawan ku daga sanannen masana'anta, kuma tabbatar da cewa an tsara tsarin musamman don lasifikar zaɓi da amfani da ku.
• Kafin amfani da tsarin hawa na musamman da aka ƙera, sami ƙwararren injiniya mai lasisi review ƙira da ƙirƙira don daidaiton tsari da aminci a cikin aikace-aikacen da aka yi niyya.
• Yi la'akari da cewa duk abubuwan da aka haɗe da zaren a bayan kowace majalisar lasifikar suna da ma'auni M6 x 1 x 15 mm zaren tare da zaren 10 masu amfani.
• Yi amfani da kebul na aminci, daban-daban a haɗe zuwa majalisar a wani wuri da ba a haɗa shi da maƙallan maƙalla masu ɗaukar nauyi na sashi zuwa lasifika.
• Idan baku san ingantacciyar ƙira, amfani, da manufar kebul na aminci ba, tuntuɓi ƙwararrun injiniya mai lasisi, ƙwararren ƙwararru, ko ƙwararrun sana'ar hasken wasan kwaikwayo.

HANKALI: Yi amfani da kayan aiki masu daraja kawai. Ya kamata masu ɗaure su zama ma'auni Grade 8.8 mafi ƙanƙanta kuma ya kamata a ƙarfafa su ta amfani da karfin juyi wanda bai wuce 50 inch-pound (5.6 Newton-mita). Tsayar da na'urar na iya haifar da lalacewa maras misaltuwa ga majalisar ministoci da kuma taro mara aminci. Makulli ko fili na kulle zare da aka yi nufin rarrabuwar hannu (kamar Loctite® 242) yakamata a yi amfani da shi don taron da ba zai iya jurewa ba.
HANKALI: Ya kamata abin ɗaure ya zama tsayin daka don shiga ƙasa da 8 kuma bai wuce zaren 10 na abin da aka makala ba. Mai ɗaure ya kamata ya fito da 8 zuwa 10 mm, tare da 10 mm fi so (5/16 zuwa 3/8 inch, tare da 3/8 inch da aka fi so) fiye da ɓangarorin hawa da aka haɗa don samar da isassun haɗe-haɗe zuwa lasifika. Yin amfani da abin ɗamara wanda ya yi tsayi da yawa na iya haifar da lalacewa maras misaltuwa ga majalisar ministocin kuma, lokacin da aka danne shi, na iya haifar da taro mara aminci. Yin amfani da abin ɗamara wanda ya yi gajere yana ba da isasshen ƙarfin riƙewa kuma yana iya tube zaren masu hawa, yana haifar da haɗuwa mara aminci. Tabbatar cewa aƙalla cikakkun zaren guda 8 suna aiki a cikin taron ku.
HANKALI: Kada kayi ƙoƙarin canza maƙallan abin da aka makala. Yayin da SAE 1/4 - 20 UNC fasteners sun yi kama da kamanni da ma'auni M6, ba sa canzawa. Kada kayi ƙoƙarin sake zaren abubuwan da aka makala don ɗaukar kowane girman zaren ko nau'in. Yin hakan zai sa shigarwar ba ta da lafiya kuma zai lalata lasifikar har abada. Kuna iya musanya 1/4-inch washers da kulle wanki don 6 mm.
Wannan samfurin ya dace da duk buƙatun umarnin EU. Za a iya samun cikakken bayanin daidaito a: www.Bose.com/bibi.

Girma

Tsarin wiring

Saita Tsarin

pro.Bose.com Don ƙayyadaddun bayanai, bayanan EQ, da cikakkun bayanai.

Saita

Tari mai girma fiye da raka'a uku zai buƙaci rigingimu na al'ada.

Zaɓuɓɓuka

	MA12	MA12EX
Transformer	CVT-MA12 Fari/Baki	CVT-MA12EX Fari/Baki
Haɗin kai baka	CB-MA12 Fari/Baki	Saukewa: CB-MA12EX Fari/Baki
Bracket-kawai	WB-MA12/MA12EX Fari/Baki
Bi-pivot Bangaren	WMB-MA12/MA12EX Fari/Baki
Makullin Ƙaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa	WMB2-MA12/MA12EX Fari/Baki
ControlSpace® Injiniya Sauti Mai sarrafawa	ESP-88 ya da ESP-00

• Mai shigo da China: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd. Gundumar Minhang, Shanghai 201100
• Mai shigo da Burtaniya: Bose Limited Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom
• EU shigo da: Bose Products BV, Gorslaan 60, 1441 RG Purmerend, Netherlands
• Mai shigo da Mexico: Bose de México, S. de RL de CV , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, DF Ga mai shigo da &
• bayanin sabis: +5255 (5202) 3545
• Mai shigo da Taiwan: Bose Reshen Taiwan, 9F-A1, Na 10, Sashe na 3, Hanyar Gabas ta Minsheng, Birnin Taipei 104, Taiwan. Lambar waya: +886-2-2514 7676
• ©2022 Bose Corporation, Duk haƙƙin mallaka.
• Framingham, MA 01701-9168 Amurka
• PRO.BOSE.COM.
• AM317618 Rev.01
• Yuni 2022
• pro.Bose.com.
• Don amfani da ƙwararrun masu sakawa kawai

Takardu / Albarkatu

BOSE MA12 Panray Modular Line Array Lasifikar [pdf] Jagoran Shigarwa MA12, MA12EX, MA12 Panray Modular Line Array Lasifika, Panray Modular Layin Lasifikar Lasifikar Lasifikar Layi na Modular, Lasifikar Tsara Layi, Lasifikar Array, Lasifikar Array, Lasifika

Magana

• Manual mai amfani