ATEC PIECAL 334 Loop Calibrator

Bayanin Samfura

• SAUKIN AMFANI
  Tare da PIECAL Model 334 zaku iya dubawa, daidaitawa da auna duk kayan aikin siginar ku na yanzu a cikin miliyon 4 zuwa 20.amp DC madauki. Ana iya amfani da shi a kowane wurin shiga cikin madaukinku. Tushen & Karanta 0.00 zuwa 24.00 mA, Kwaikwayi Mai watsa Waya 2 ko yi amfani da PIECAL Model 334 don kunna wutar lantarki na Waya 2 a lokaci guda kuma auna fitowar ta. Lokacin da ake so PIECAL Model 334 na iya nuna halin yanzu a milliamps ko kashi 4 zuwa 20.
• MAJIYA MILLIAMPS
  Masu rikodin ƙira, alamun dijital, bawul ɗin bugun jini ko duk wani kayan aikin da ke samun shigarsu daga madauki 4 zuwa 20 mA. Sauƙaƙe saita kowane ƙima cikin sauri zuwa tsakanin 0.01 mA tare da daidaitacce mai ƙarfin dijital "DIAL" ko amfani da saiti 4.00 mA (0.0%) da 20.00 mA (100.0%) EZ-CHECK™ saituna.
• TUNA TSARIHIN FITARWA
  Canjin EZ CHECK™ yana ba da saurin dubawa na 4.00, 20.00 da kowane madaidaicin maki na uku tsakanin 0.00 zuwa 24.00 mA.
• CALIBRATE AMFANI DA WUTA MAƊAKI Bincika wayoyi da masu karɓa ta hanyar amfani da PIECAL Model 334 a madadin mai watsa wayoyi 2. Yi kwaikwayon shigar da tsarin canji don duba amsawar madauki da saitunan sarrafawa. Model PIECAL 334 yana amfani da kowane ikon madauki daga 2 zuwa 100V DC.
• KARATUN MAƊAKI NA YANZU
  Bincika abubuwan sarrafawa ko auna milliamp sigina a ko'ina a cikin madauki. Model na PIECAL 334 yana auna sigina 0.00 zuwa 52.00 mA tare da daidaito mafi girma fiye da na yau da kullun. Ana iya sauya samfurin PIECAL 334 cikin sauƙi zuwa milliamps ko kashi 4 zuwa 20.
• WUTA & AUNA GUDA 2 WIRE
  Model na PIECAL 334 na iya fitar da 24V DC lokaci guda don kunna kowane na'ura a cikin madaidaicin tsari ta amfani da batura na ciki da wutar lantarki ta cikin gida, yayin da ake auna fitowar mai watsa Waya 2 da duk wani na'urorin madauki. Wannan yana da amfani don duba ayyukan masu watsawa a cikin filin ko a kan benci.
• KARANTA DC Volts
  PIECAL Model 334 na iya aunawa daga -99.99 zuwa +99.99 VDC tare da ƙudurin 10mV. Yi amfani da shi don duba kayan wuta na madauki, masu juyawa I/V, masu rikodin taswira, sigina na 1 zuwa 5 Volt, da kowane volt.tages a cikin wannan kewayon yana sa ba lallai ba ne don ɗaukar ƙarin multimeter.

Basic Aiki

1. SAUYA WUTA
   Zaɓi "mA" don nunawa da daidaitawa a milliamps. Zaɓi "% 4 zuwa 20mA" don nunawa da daidaitawa cikin kashi. Zaɓi "KARANTA VDC" don karanta volts DC. Mayar da maɓallin nunin faifai zuwa matsayin "KASHE" lokacin da ba a amfani da shi.
   Lura: Hakanan za'a iya amfani da yanayin kashi ɗaya tare da masu rikodin ginshiƙi, bawuloli ko tafiye-tafiye na yanzu waɗanda ke nunawa cikin kashi.
   • 100.0% = 20.00 mA
   • 75.0% = 16.00 mA
   • 50.0% = 12.00 mA
   • 25.0% = 8.00 mA
   • 0.0% = 4.00 mA
   • Canza daga Milliamps zuwa Kashi: Kashi = (Milliamps - 4) / 0.16
   • Don canzawa daga Kashi zuwa Milliamps: milliamps = Kashi / 6.25 + 4
2. SOURCE / KARANTA / 2 WIRE SWITCH Zaɓi "SAUKI" don fitarwa cikin milliamps ko kashi dari.
   Zaɓi "KARANTA" don karantawa cikin milliamps ko kashi dari.
   Zaɓi "2 WIRE" don kwaikwayi mai watsa waya 2.
3. EZ-CHECK™ MUNIYA
   Ana fitar da 4.00 mA ko 20.00 mA ta hanyar matsar da EZ-CHECK™ canza zuwa "4.00mA" / "0.0%" matsayi ko "20.00mA" / "100.0%". Don saurin bincike maki uku zaɓi matsayi "DIAL". Model PIECAL 334 zai tuna ƙimar “DIAL” ta ƙarshe, har ma da kashe wuta.
   Lura: Ana adana ƙimar “DIAL” iri ɗaya don duka mA da %. Za a nuna ƙimar da aka tuna a cikin raka'o'in da aka zaɓa.
4. KIRAN KNOB
   Juya kullin don daidaita matakin fitarwa. Juya kusa da agogo don ƙara yawan fitarwa, ƙima da agogo don rage fitarwa.
5. JACK WUTA na waje (Ba a Nuna) Lokacin amfani da haɗin gwiwa tare da adaftan AC na zaɓi, jack ɗin wutar lantarki na waje zai kawar da magudanar ruwa akan batir ɗin ku. Wannan yana da amfani sosai ga aikace-aikacen da ke buƙatar tsawaita amfani da PIECAL Model 334. Da fatan za a duba sashin na'urorin haɗi don yin odar bayanai.
   Lura: Wannan fasalin baya cajin batura, yana ba da wuta kawai ga PIECAL Model 334.

CANJA BATIRI
Ana nuna ƙaramin baturi ta “BAT” akan nunin. Kimanin sa'o'i ɗaya zuwa huɗu na aiki na yau da kullun ya rage kafin 334 zai kashe ta atomatik. Don canza batura; cire takalmin roba, cire ƙofar baturin daga bayan naúrar ta hanyar zame kofa zuwa ƙasa. Wannan zai ba da damar shiga sashin baturi. Sauya da hudu (4) "AA" 1.5 batura yin taka tsantsan don duba polarity. Sanya ƙofar baturin baya kan naúrar kuma maye gurbin takalmin roba.
Lura: Ana ba da batir alkaline kuma ana ba da shawarar don iyakar rayuwar baturi da aiki.

Sunan mahaifi Milliamps

FITA, % FITA (Kashi 4 zuwa 20 mA)
Zaɓi wannan aikin don samar da fitarwa daga 0.00 zuwa 24.00 millilitersamps. The yarda voltage shine 24 VDC mara kyau don samar da ikon tuƙi zuwa milli ɗin kuamp masu karɓa.

1. Cire haɗin wayar shigarwa ɗaya ko biyu daga na'urar don daidaitawa.
2. Zaɓi "mA" ko "% 4 zuwa 20mA" tare da sauyawar faifai q.
3. Zaɓi "SOURCE" ta amfani da maɓallin slide w. Haɗa abubuwan fitarwa na PIECAL
4. Model 334 zuwa abubuwan shigar da na'urar ana daidaita su, tabbatar da duba polarity. Jajayen jagora zuwa shigar da ƙari (+) da baƙar jagora zuwa shigarwar debe (-).

Ana daidaita fitar da fitarwa ta hanyar kunna kullin r yayin da EZ-CHECK ™ switch e yana cikin “DIAL” matsayi, ko kuma ana iya saita na yanzu a madaidaitan wuraren 4.00mA (0.0%) ko 20.00mA (100.0%) tare da sauya e.

Karatun Milliamp Abubuwan da aka fitar

KARANTA mA, KARANTA % (Kashi na 4 zuwa 20 mA)
Zaɓi wannan aikin don auna daga 0.00 zuwa +52.00 millilitersamps ko -25.0 zuwa 300.0%.

1. Buɗe madauki na yanzu a kowane wuri mai dacewa tare da hanyar sigina.
2.  Zaɓi "mA" ko "% 4 zuwa 20mA" tare da sauyawar faifai q.
3. Zaɓi "Karanta" ta amfani da maɓalli na slide w. Haɗa jagorar shigarwar ja (+) na PIECAL Model 334 zuwa mafi tabbataccen wurin hutu da shigar baki.

Alamun da ke ƙasa 0 mA ko buɗaɗɗen da'irori ana nuna su ta 0.00 mA (-25.0%) akan nunin. Sigina sama da 52mA na yanzu suna iyakance ta hanyar kewayawa na kariya.

Simulate 2-Wayar watsawa

2 Waya mA, 2 Waya % (Kashi na 4 zuwa 20mA)
Zaɓi wannan aikin don kwaikwayi fitarwar Waya ta 2 daga 0.00 zuwa 24.00 milliamps. Yana aiki a madaukai tare da samar da wutar lantarki voltagdaga 2 zuwa 100 VDC

1.  Cire haɗin wayar shigarwa ɗaya ko biyu daga na'urar don daidaitawa.
2. Zaɓi "mA" ko "% 4 zuwa 20mA" tare da sauyawar faifai q.
3. Zaɓi "2 WIRE" ta amfani da maɓallin slide w.
4. Haɗa jagorar shigarwar ja na PIECAL Model 334 zuwa ƙari (+) shigarwar haɗin filin da baƙar jagora zuwa ragi (-).

Ana daidaita madauki na yau da kullun ta hanyar jujjuya kulli r yayin da EZ-CHECK ™ switch e ke cikin “DIAL” matsayi, ko kuma ana iya saita na yanzu a madaidaitan wuraren 4.00mA (0.0%) ko 20.00mA (100.0%) tare da sauya e.

Ƙarfi & Auna Masu watsa Waya 2

mA OUT, % OUT (Kashi 4 zuwa 20 mA)
Zaɓi wannan aikin don samar da wuta lokaci guda zuwa mai watsa wayoyi 2 yayin nuna fitowar 4 zuwa 20 mA na mai watsawa.

1. Cire haɗin wayar shigarwa ɗaya ko biyu daga na'urar don daidaitawa.
2. Zaɓi "mA" ko "% 4 zuwa 20mA" tare da sauyawar faifai q.
3. Zaɓi "SOURCE" ta amfani da maɓallin slide w.
4. Juya maɓallin r a kusa da agogo da yawa har sai an sami cikakken fitarwa (24.00 mA/125.0%) (ana iya tabbatar da wannan ta hanyar yanke abubuwan fitarwa tare da duba cewa nuni yana nuna "FULL SCALE").
5. Haɗa jagorar tushen ja na PIECAL Model 334 zuwa ƙari (+) shigarwar na'urar da tushen baƙar fata zuwa ragi (-).

Model na PIECAL 334 yana ba da ƙarancin 24 volts DC a 24mA zuwa 2 Waya Transmitter. PIECAL Model 334 za ta nuna daidai halin yanzu da mai watsawa ya wuce. Yi Calibrate mai watsawa kamar yadda aka saba kuma cire haɗin PIECAL Model 334.
Instrument Electronics
82 Gabas Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • sales@piecal.com • www.picecal.com

Karanta DC Volts

KU KARANTA V
Zaɓi wannan aikin don auna daga -99.99 zuwa +99.99V DC.

1. Zaɓi "KARATUN VDC" tare da sauya sheka q.
2. Haɗa ja (+) da baƙar fata (-) na PIECAL Model 334 a fadin voltage tushen da za a auna.

Kowane DC voltage daga -99.99 zuwa +99.99 volts za a iya auna. Madauki wutar lantarki, sigina voltage a masu karɓa, batura da watsawa voltage drops za a iya auna. Alamun da suka wuce ± 99.99 VDC OVRLD za a nuna su akan nunin.

Bayanan kula aikace-aikace

FITAR DA ALAMOMIN KWANKWASIYYA
Alamun da ke ƙasa 0 mA ko buɗaɗɗen da'irori ana nuna su ta 0.00 mA (-25.0%) akan nunin. Sigina sama da 52mA a halin yanzu suna iyakance ta hanyar kewayawa na kariya zuwa kusan 54mA.

CI GABA DA TSARI
Lokacin da kayan aiki a cikin madauki mai mahimmanci ya haifar da matsala yana da mahimmanci don kula da tsarin. Ana iya musanya PIECAL Model 334 don mai sarrafawa mara kyau ko mai watsawa don samar da ikon sarrafa na ɗan lokaci na tsari. Daya majina na da fasaha da ikon aiwatar da tsarin yayin da mai fasaha na biyu ya dawo da shi, yana shigar da kayan aikin maye.

BUDE MADUBANCI
Nuni zai nuna 0.00 mA ko -25.0% idan akwai buɗaɗɗen madauki ko kuma idan an juya polarity. Bincika duk haɗin da ke cikin madauki ko gwada juyar da jagorar.

MASU SAUKAR WUTA
Daidaita fitowar SOURCE zuwa cikakken ma'auni yana ba da 24V DC na ƙima don yin wutar lantarki ta 2 Wire Transmitter yayin da yake nuna fitowar 4 zuwa 20 mA na mai watsawa lokaci guda.

KARANTA MILLIAMPS
Zaɓi milli READamps ta hanyar matsar da slides q zuwa "mA" ko "% 4 to 20mA" da kuma matsar da nunin faifai w zuwa "KARANTA". Sanya PIECAL Model 334 a cikin madauki a jere tare da na yanzu don aunawa.

MAJIYA MILLIAMPS ko 2-WIRE SIMULATOR Zaɓi "SALIFOFIN" ta amfani da faifan maɓalli w don fitarwa daga 0.00 zuwa 24.00 milliamps ta amfani da PIECAL Model 334's tushen wutar lantarki na ciki. Wannan zai samar da 24V DC. Zaɓi "2-WIRE" don sarrafa madauki na yanzu wanda ke amfani da wutar lantarki da ke akwai. Don canza fitarwa na halin yanzu daidaita maɓallin bugun kira r. Juya hannun agogo baya zai ƙara ƙimar fitarwa, jujjuya gaba da agogo zai rage ƙimar fitarwa. Ana iya daidaita fitarwar a duk wuraren EZ-CHECK™. Lokacin komawa zuwa matsayi "4.00mA"/"0.0%" da "20.00mA"/"100%" za su koma 4.00 (0.0%) da 20.00 (100.0%) mA. Wannan hanya ta fi na'urorin faifan maɓalli. Za a iya daidaita ma'aunin sifili da cikakkun ma'auni mai sauƙi da sauƙi yin gwajin ƙarshen ƙarshen bawul, gwajin ma'anar tafiya, gwajin ƙararrawa, da dai sauransu.

KARANTA DC Volts
Zaɓi "KARANTA VDC" ta amfani da maɓallin zamewa q don karanta volts DC. Clip jagororin a fadin voltage da za a auna.

Bayanan kula aikace-aikace

KAFA WUTA
Lokacin kafa bawul yana da mahimmanci don saita tasha ta ƙarshe daidai. Yi amfani da PIECAL Model 334 wo yana ba da siginar sarrafawa 4 zuwa 20mA don bugun bawul. Zaɓi "SOURCE" kuma PIECAL Model 334 zai yi amfani da tushen wutar lantarki na ciki fpr fitarwa na halin yanzu ko canzawa zuwa 2-WIRE SIMULATOR don bugun bawul ta amfani da duk wata wutar lantarki da aka shigar da ita a matsayin tushen wutar lantarki.
Exampda:

1. Cire haɗin wayoyi masu sarrafa 4-20mA daga Mai sauya-zuwa Matsawa (I/P) na yanzu ko mai kunnawa.
2. Haɗa PIECAL Model 334 ta bin tsarin haɗin kai akan shafukan da suka gabata don Simulate 2-Wire Transmitters.
3. Matsar da EZ-CHECK™ e zuwa "4.00 mA"/"0.0%" kuma daidaita cikakkiyar tasha a kan mai kunnawa.
4. Juya kullin PIECAL Model 334 a hankali kusa da agogo kuma tabbatar da cewa mai kunnawa da bawul ba sa motsawa. Maimaita matakai na 3 & 4 har sai ba a gano motsi ba.
5. Matsa maɓallin EZ-CHECK™ e zuwa DIAL kuma da sauri komawa zuwa "4.00mA"/"0.0%" sa'an nan kuma juya PIECAL Model 334's kullin agogon agogo. Mai kunnawa da bawul ya kamata su fara motsawa.
6. Matsar da EZ-CHECK™ e zuwa "20.00 mA"/"100.0%" kuma daidaita cikakken buɗe tasha akan mai kunnawa.
7. Juya kullin PIECAL Model 334 a hankali kusa da agogo kuma tabbatar da cewa mai kunnawa da bawul ba sa motsawa. Maimaita matakai na 6 & 7 har sai ba a gano motsi ba.
8.  Matsar da maɓallin EZ-CHECK™ e zuwa DIAL kuma da sauri komawa zuwa “20.00 mA”/”100.0%” sannan kunna kullin PIECAL Model 334 a kan agogo baya. Mai kunnawa da bawul ya kamata su fara motsawa.

Na'urorin haɗi

• AC ADAPTER (200 zuwa 240 VAC) Sashe na 020-0100
• AC ADAPTER (100 zuwa 120 VAC) Sashe na 020-0101
• Ni-MH Caja Sa'a 1 w/4 Ni-MH AA Baturi Sashi na 020-0103

Garanti

Kayan Kayan Aikin Lantarki na PIECAL Model 334 yana da tabbacin zama maye gurbin aikin Altek Model 334 ko Altek Model 334A kamar yadda aka bayyana a kwatancen samfur. Ana iya yin da'awar ƙarƙashin wannan garanti ta hanyar dawo da kayan aikin da aka riga aka biya zuwa masana'antar mu. Za a gyara kayan aikin, maye gurbinsu, daidaitawa ko dawo da kuɗi a zaɓi namu. Abubuwan alhaki na Kayan Aikin Lantarki (PIE) an iyakance ga abin da aka bayar ƙarƙashin garantin mu. Ba a karɓi alhakin lalacewa, asara ko wasu kuɗi da aka jawo ta hanyar siyarwa ko amfani da kayan aikin mu. Ƙarƙashin wani sharadi da Practical Instrument Electronics, Inc. zai zama abin dogaro ga kowane lalacewa na musamman, mai haɗari ko mai haifar da lalacewa.

Garanti

Kayan aikin mu yana da garantin rashin lahani da kayan aiki (ban da batura) na tsawon shekaru uku daga ranar jigilar kaya. Ana iya yin da'awar ƙarƙashin garanti ta hanyar mayar da kayan aikin da aka riga aka biya zuwa masana'anta. Za a gyara kayan aikin, maye gurbinsu ko daidaita su a zaɓi namu. Alhakin Kayan Lantarki na Kayan Aikin Lantarki (PIE) yana iyakance ga wanda aka bayar ƙarƙashin garantin mu. Ba a karɓi alhakin lalacewa, asara ko wasu kuɗi da aka jawo ta hanyar siyarwa ko amfani da kayan aikin mu. Ƙarƙashin wani sharadi da Practical Instrument Electronics, Inc. zai zama abin dogaro ga kowane lalacewa na musamman, mai haɗari ko mai haifar da lalacewa.
Instrument Electronics
82 Gabas Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • sales@piecal.com • www.picecal.com

Bayanan Bayani na PIECAL 334

(Sai in ba haka ba an nuna duk ƙayyadaddun bayanai ana ƙididdige su daga ƙima na 23 ° C, 70% RH na shekara 1 daga daidaitawa)

Gabaɗaya
Tsawon Zazzabi Mai Aiki	-20 zuwa 60 °C (-5 zuwa 140 ° F)
Ma'ajiya Yanayin Zazzabi	-30 zuwa 60 °C (-22 zuwa 140 ° F)
Dangantakar Humidity Range	10 % ≤RH ≤90 % (0 zuwa 35 ° C), Mara tauri
	10% ≤RH≤ 70 % (35 zuwa 60 ° C)
Girman	L=5.63 x W=3.00 x H=1.60 inci
Nauyi	12.1 oz (ciki har da taya & batura)
Baturi	Hudu "AA" Alkaline 1.5V (LR6)
Adaftan AC na zaɓi	120 VAC 50/60 Hz [Sashe # 020-0100] 240 VAC 50/60 Hz [Sashe # 020-0101]
Kunshin baturi mai caji NiMh na zaɓi	120 VAC don Arewacin Amurka kawai; caja, baturan NiMh guda hudu, igiyoyin AC & DC [Sashe # 020-0103]
Ƙananan Baturi	Ƙananan nunin baturi tare da saura awa 1 na aiki na ƙima
Kariya daga rashin haɗin gwiwa	Sama-voltage kariya zuwa 135 vrms (ƙididdigewa na 30 seconds) ko 240 vrms (ƙididdiga na 15 seconds)
Nunawa	Babban nunin nunin faifan ruwa mai hoto mai haske tare da manyan lambobi 0.413” (10.5 mm).

Karanta mA
334 Ragewa da Ƙaddamarwa	0.00 zuwa 52.00mA Cikakkiyar Tazara KO -25.0 zuwa 300.0% na 4-20mA
Daidaito Below 24.01MA Sama da 24.00mA	≤ ± (0.05% na 24.00mA) (± 0.01mA) ≤ ± (0.05% na 52.00mA) (± 0.03mA)
Voltage nauyi	≤ 2V a 50mA
Kariyar wuce gona da iri/Kariyar iyaka ta yanzu	54mA mai suna
Rayuwar baturi	≥ 125 hours mara kyau

(Sai in ba haka ba an nuna duk ƙayyadaddun bayanai ana ƙididdige su daga ƙima na 23 ° C, 70% RH na shekara 1 daga daidaitawa)

Tushen/Power & Auna Biyu Waya Masu watsawa
334 Ragewa da Ƙaddamarwa	0.00 zuwa 24.00mA Cikakken Tsayi ko -25.0 zuwa 125.0% na 4-20mA
Daidaito EZ Check(s) a 4 & 20mA1 0.0 zuwa 24.00mA	≤ ± (0.025% na Span a 4 mA & 20mA) (± 0.005mA) ≤ ± (0.05% na 24.00mA Span) (± 0.012mA)
Surutu	≤ ± ½ Lambobi mafi Muhimmanci
Tasirin yanayin zafi	≤ ± 0.005%/C na FS
Madauki yarda voltage	≥ 24 DCV @ 20.00mA
Madauki iyawa	1200 Ω a 20 mA na 15 hours mara kyau; 950 Ω tare da kunna Hart Resistor (334Plus)
Rayuwar baturi	Yanayin ma'auni na tushen da wutar lantarki ≥ 30 hrs a 12 mA mara kyau; ≥ 25 hours tare da hasken baya a kunne (334Plus)

2-Waya Mai watsawa kwaikwayo
Daidaito	Daidai da Tushen/Power & Auna
Voltage nauyi	≤ 2V a 20mA
Kariyar wuce gona da iri/Kariyar iyaka ta yanzu	24mA mai suna
Madauki voltage iyaka	2 zuwa 100 VDC (wanda ba shi da kariya daga haɗin kai mai juyi)
Rayuwar baturi	≥ 125 hours mara kyau

Voltage Karanta
Range da ƙuduri	-99.99 zuwa +99.99 VDC Cikakken Tazarar (FS)
Daidaito	≤ ± 0.05% na FS
Tasirin yanayin zafi	≤ ± 100 ppm/°C na FS
Juriya na shigarwa	≥ 2 MΩ
Rayuwar baturi	≥ 125 hours mara kyau

Ƙarin Bayani
An ƙirƙira wannan samfurin akan kayan aikin da ake iya ganowa zuwa NIST kuma ya haɗa da Takaddun Shaida. Akwai bayanan gwaji don ƙarin caji.
Practical Instrument Electronics yana ba da shawarar tazarar daidaitawa na shekara guda. Tuntuɓi wakilin ku na gida don sake gyarawa da sabis na gyarawa.

Instrument Electronics
82 Gabas Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • sales@piecal.com • www.picecal.com

Takardu / Albarkatu

ATEC PIECAL 334 Loop Calibrator [pdf] Manual mai amfani PIECAL 334 Madauki Calibrator, PIECAL 334, Madauki Calibrator, Calibrator

Magana

• Manual mai amfani