Arduino ABX00071 Nano 33 BLE Module
Ƙayyadaddun bayanai
- Sunan samfur: Arduino Nano 33 BLE Rev2
- SKU: ABX00071
- Mai sarrafawa: Cortex M4F ya dogara da Nordic nRF52480
- IMU: BMI270 6-axis IMU (Accelerometer da Gyroscope), BMM150 3-axis IMU (Magnetometer)
- Mara waya mara waya NINA B306 Module tare da tallafin rediyo na IEEE 802.15.4, Zare, Zigbee
- Mai sarrafa DC-DC: MP2322, shigarwa voltage har zuwa 21V, inganci fiye da 85% @12V
Umarnin Amfani da samfur
Aikin hukumar
Don farawa da Arduino Nano 33 BLE Rev2, bi waɗannan matakan:
- IDE: Fara da kafa Haɗin Haɗin Ci gaban Mahalli (IDE).
- Arduino Web Edita: A madadin, zaku iya amfani da Arduino Web Editan shirye-shirye.
- Arduino IoT Cloud: Bincika zaɓuɓɓukan haɗin gajimare don ayyukanku na IoT.
- Sampda Zane-zane: Samun damar zanen da aka riga aka gina don gwaji da koyo cikin sauri.
- Albarkatun Kan layi: Koma zuwa takaddun kan layi da taron jama'a don tallafi.
- Farfadowar allo: A cikin kowane matsala, koyi yadda ake dawo da allo.
Mai haɗa Pinouts
Fahimtar mahaɗa daban-daban akan allo:
- USB: Yi amfani da haɗin USB don tsarawa da iko.
- Masu kai: Haɗa na'urorin waje ko abubuwan haɗin kai ta amfani da kanun labarai.
- Gyara: Yi amfani da tashar zazzagewa don magance matsala da saka idanu.
Bayanin Injiniya
- Koyi game da ƙayyadaddun bayanai na hukumar:
- Bayanin allo: Fahimtar girma da ramukan hawa na allo.
FAQ
- Q: Zan iya amfani da siginar 5V tare da Arduino Nano 33 BLE Rev2?
- A: A'a, hukumar tana goyan bayan 3.3VI/Os kawai kuma baya jurewa 5V. Haɗin siginar 5V kai tsaye na iya lalata allon allo.
- Q: Ta yaya zan yi amfani da Arduino Nano 33 BLE Rev2?
- A: Kuna iya sarrafa allon ta hanyar USB ko headers. Jirgin ba shi da cajar baturi a ciki.
Bayani
Arduino Nano 33 BLE Rev2* ƙaƙƙarfan ƙa'ida ce mai girman NINA B306, bisa Nordic nRF52480 kuma yana ɗauke da Cortex M4F. BMI270 da BMM150 tare suna ba da 9-axis IMU. Za'a iya shigar da tsarin ko dai a matsayin bangaren DIP (lokacin da ake hawan fil) ko kuma a matsayin bangaren SMT, ana siyar da shi kai tsaye ta faifan castellated.
Samfurin Arduino Nano 33 BLE Rev2 yana da SKUs guda biyu:
- Ba tare da kai ba (ABX00071)
- Mai taken (ABX00072)
Yankunan Target
- Mai ƙirƙira, haɓakawa, aikace-aikacen IoT
Siffofin
NINA B306 Module
- Mai sarrafawa
- 64 MHz Arm® Cortex®-M4F (tare da FPU)
- 1 MB Flash + 256 KB RAM
Bluetooth® 5 multiprotocol rediyo
- 2 Mbps
- CSA #2
- Karin Talla
- Dogon Rage
- + 8 dBm TX iko
- -95 dBm hankali
- 4.8mA a cikin TX (0 dBm)
- 4.6mA a cikin RX (1 Mbps)
- Haɗin balun tare da 50 Ω fitarwa mai ƙarewa ɗaya
- IEEE 802.15.4 goyon bayan rediyo
- Zare
- Zigbee
Na'urorin haɗi
- Cikakken-gudun 12 Mbps USB
- NFC-A tag
- Arm CryptoCell CC310 tsarin tsaro
- QSPI/SPI/TWI/I²S/PDM/QDEC
- Babban gudun 32 MHz SPI
- Quad SPI dubawa 32 MHz
- EasyDMA don duk musaya na dijital
- 12-bit 200 ksps ADC
- 128-bit AES/ECB/CCM/AAR co-processor
BMI 270 6-axis IMU (Accelerometer da Gyroscope)
- 16-bit
- 3-axis accelerometer tare da ± 2g / ± 4g / 8g / ± 16g kewayon
- 3-axis gyroscope tare da ± 125dps / 250dps / ± 500dps / ± 1000dps / ± 2000dps kewayon
BMM150 3-axis IMU (Magnetometer)
- 3-axis dijital geomagnetic firikwensin
- 0.3μT ƙuduri
- ± 1300μT (x, y-axis), ± 2500μT (z-axis)
Saukewa: MP2322 DC
- Yana daidaita shigar da voltage daga har zuwa 21V tare da mafi ƙarancin aiki na 65% @ mafi ƙarancin kaya
- Fiye da inganci 85% @12V
Hukumar
Kamar yadda duk kwamitocin nau'ikan nau'ikan Nano, Nano 33 BLE Rev2 ba shi da cajar baturi amma ana iya yin aiki ta hanyar USB ko masu kai.
NOTE: Arduino Nano 33 BLE Rev2 yana goyan bayan 3.3VI/Os kawai kuma baya jure wa 5V don haka da fatan ba a haɗa siginar 5V kai tsaye zuwa wannan allo ko kuma ta lalace. Hakanan, sabanin allunan Arduino Nano waɗanda ke goyan bayan aikin 5V, fil ɗin 5V BA ya samar da vol.tage amma an fi haɗa shi, ta hanyar jumper, zuwa shigar da wutar lantarki ta USB.
Mahimman ƙima
Sharuɗɗan Aiki da aka Shawarar
| Alama | Bayani | Min | Max |
| Iyakoki na thermal Conservative ga dukkan hukumar: | -40°C (40°F) | 85°C (185°F) |
Amfanin Wuta
| Alama | Bayani | Min | Buga | Max | Naúrar |
| PBL | Amfanin wuta tare da madauki mai aiki | TBC | mW | ||
| PLP | Yin amfani da wutar lantarki a cikin ƙarancin wutar lantarki | TBC | mW | ||
| PMAX | Matsakaicin Amfani da Wuta | TBC | mW |
Aiki Ya Ƙareview
Cibiyar Topology
Sama
| Ref. | Bayani | Ref. | Bayani |
| U1 | NINA-B306 Module Bluetooth® Ƙananan Makamashi 5.0 Module | U6 | MP2322GQH Mataki Down Converter |
| U2 | BMI270 Sensor IMU | Saukewa: PB1 | Saukewa: IT-1185AP1C-160G-GTR |
| U7 | BMM150 Magnetometer IC | Farashin DL1 | LED L |
Kasa
| Ref. | Bayani | Ref. | Bayani |
| SJ1 | VUSB Jumper | SJ2 | D7 Jumper |
| Ref. | Bayani | Ref. | Bayani |
| SJ3 | 3v3 Jump | SJ4 | D8 Jumper |
Mai sarrafawa
Babban Mai sarrafawa shine Arm® Cortex®-M4F wanda ke gudana har zuwa 64MHz. Yawancin fil ɗin sa suna haɗe da masu kai na waje duk da haka wasu an tanadar su don sadarwa ta ciki tare da tsarin mara waya da na cikin jirgi na ciki I2C (IMU da Crypto).
NOTE: Sabanin sauran allunan Arduino Nano, fil A4 da A5 suna da cirewar ciki da tsoho don amfani da su azaman Bus na I2C don haka ba a ba da shawarar amfani da abubuwan shigar analog ba.
IMU
Arduino Nano 33 BLE Rev2 yana ba da damar IMU tare da axis 9, ta hanyar haɗin BMI270 da BMM150 ICs. BMI270 ya haɗa da gyroscope mai axis guda uku da kuma na'urar accelerometer mai axis uku, yayin da BMM150 ke da ikon fahimtar bambancin filin maganadisu a cikin dukkan matakan uku. Za a iya amfani da bayanan da aka samu don auna ma'aunin motsi na ɗanyen motsi da kuma koyan na'ura.
Itace Power
Ana iya kunna allon ta hanyar haɗin USB, VIN ko VUSB fil akan masu kai.
NOTE: Tun da VUSB tana ciyar da VIN ta hanyar Schottky diode da mai sarrafa DC-DC ƙayyadaddun ƙaramar shigarwar vol.tage shine 4.5V mafi ƙarancin wadata voltage daga kebul na USB dole ne a ƙara zuwa voltage a cikin kewayon tsakanin 4.8V zuwa 4.96V dangane da halin yanzu da ake zana.
Tsarin zane
Aikin hukumar
Farawa - IDE
Idan kana son shirya Arduino Nano 33 BLE Rev2 naka yayin da kake layi, kana buƙatar shigar da Arduino Desktop IDE [1] Don haɗa Arduino Nano 33 BLE Rev2 zuwa kwamfutarka, zaka buƙaci kebul na USB na Micro-B. Wannan kuma yana ba da iko ga allon, kamar yadda LED ya nuna.
Farawa - Arduino Web Edita
- Duk allunan Arduino, gami da wannan, suna aiki a waje akan Arduino Web Edita, ta hanyar shigar da plugin mai sauƙi kawai.
- A Arduino Web Ana gudanar da edita akan layi, saboda haka koyaushe zai kasance na zamani tare da sabbin abubuwa da goyan baya ga duk allunan. Bi don fara codeing akan mai binciken kuma loda zane-zanen ku akan allo.
Farawa - Arduino IoT Cloud
Duk samfuran da aka kunna Arduino IoT ana tallafawa akan Arduino IoT Cloud wanda ke ba ku damar Shiga, tsarawa da tantance bayanan firikwensin, jawo abubuwan da suka faru, da sarrafa gidanku ko kasuwancin ku.
Sampda Sketches
SampAna iya samun zane-zane na Arduino Nano 33 BLE Rev2 ko dai a cikin “Ex.amples” menu a cikin Arduino IDE ko a cikin sashin “Takardu” na Arduino Pro website.
Albarkatun Kan layi
Yanzu da kuka wuce ta hanyar abubuwan da za ku iya yi tare da hukumar za ku iya bincika damar da ba ta da iyaka da take bayarwa ta hanyar duba ayyuka masu ban sha'awa akan ProjectHub, Rubutun Laburaren Arduino da kantin sayar da kan layi inda za ku iya cika allon ku tare da na'urori masu auna firikwensin. , actuators da sauransu.
Farfadowar allo
Duk allunan Arduino suna da ginanniyar bootloader wanda ke ba da damar walƙiya allon ta USB. Idan zane ya kulle na'ura mai sarrafawa kuma allon ba a iya samun shi ta hanyar USB yana yiwuwa a shigar da yanayin bootloader ta danna maɓallin sake saiti sau biyu bayan kunna allon.
Mai haɗa Pinouts
USB
| Pin | Aiki | Nau'in | Bayani |
| 1 | VUSB | Ƙarfi | Shigar da Wutar Lantarki. Idan ana amfani da hukumar ta hanyar VUSB daga kan taken wannan fitarwa ce (1) |
| 2 | D- | Banbanci | kebul daban-daban data - |
| 3 | D+ | Banbanci | Kebul daban-daban data + |
| 4 | ID | Analog | Zaɓi Ayyukan Mai watsa shiri/Na'ura |
| 5 | GND | Ƙarfi | Power Ground |
Shugabanni
Allon yana fallasa masu haɗin fil 15 guda biyu waɗanda za a iya haɗa su tare da fitilun kan layi ko kuma ana siyar da su ta hanyar castellated vias.
| Pin | Aiki | Nau'in | Bayani |
| 1 | D13 | Dijital | GPIO |
| 2 | +3V3 | Ikon Wuta | Fitar wutar lantarki ta ciki zuwa na'urorin waje |
| 3 | AREF | Analog | Maganar Analog; za a iya amfani dashi azaman GPIO |
| 4 | A0/DAC0 | Analog | ADC cikin / DAC fita; za a iya amfani dashi azaman GPIO |
| 5 | A1 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 6 | A2 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 7 | A3 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 8 | A4/SDA | Analog | ADC a ciki; I2C SDA; Ana iya amfani dashi azaman GPIO (1) |
| 9 | A5/SCL | Analog | ADC a ciki; I2C SCL; Ana iya amfani dashi azaman GPIO (1) |
| 10 | A6 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 11 | A7 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 12 | VUSB | Wutar Shiga/Fita | Yawanci NC; ana iya haɗa shi da fil ɗin VUSB na haɗin kebul ta hanyar rage tsalle |
| 13 | RST | Dijital In | Ƙaramar shigarwar sake saiti mai aiki (kwafin fil 18) |
| 14 | GND | Ƙarfi | Power Ground |
| 15 | VIN | Power In | Shigar Wutar Wuta ta Vin |
| 16 | TX | Dijital | USART TX; za a iya amfani dashi azaman GPIO |
| 17 | RX | Dijital | USART RX; za a iya amfani dashi azaman GPIO |
| 18 | RST | Dijital | Ƙaramar shigarwar sake saiti mai aiki (kwafin fil 13) |
| 19 | GND | Ƙarfi | Power Ground |
| 20 | D2 | Dijital | GPIO |
| 21 | D3/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 22 | D4 | Dijital | GPIO |
| 23 | D5/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 24 | D6/PWM | Dijital | Ana iya amfani da GPIO azaman PWM |
| 25 | D7 | Dijital | GPIO |
| 26 | D8 | Dijital | GPIO |
| 27 | D9/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 28 | D10/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 29 | D11/MOSI | Dijital | SPI MOSI; za a iya amfani dashi azaman GPIO |
| 30 | D12/MISO | Dijital | SPI MISO; za a iya amfani dashi azaman GPIO |
Gyara kuskure
A gefen ƙasa na allon, a ƙarƙashin tsarin sadarwa, ana shirya siginonin ɓarna azaman 3 × 2 pads na gwaji tare da farar mil 100 tare da cire fil 4. Fil 1 ana kwatanta shi a Hoto na 3 - Matsayin Mai Haɗi.
| Pin | Aiki | Nau'in | Bayani |
| 1 | +3V3 | Ikon Wuta | Fitar da wutar lantarki ta ciki da za a yi amfani da ita azaman voltage reference |
| 2 | SWD | Dijital | nRF52480 Bayanan Gyaran Waya Daya |
| 3 | SWCLK | Dijital In | nRF52480 Agogon Debug Waya Guda |
| 5 | GND | Ƙarfi | Power Ground |
| 6 | RST | Dijital In | Shigar da ƙananan saiti mai aiki |
Bayanin Injiniya
Bayanin allo da Ramukan Hawa
Matakan allon sun gauraya tsakanin awo da na sarki. Ana amfani da matakan daular don kula da grid mai nisan mil 100 tsakanin layuka na fil don ba su damar dacewa da allon biredi yayin da tsayin allo Metric ne.
Takaddun shaida
Sanarwa na Daidaitawa CE DoC (EU)
Muna ayyana ƙarƙashin alhakin mu kaɗai cewa samfuran da ke sama sun dace da mahimman buƙatun ƙa'idodin EU masu zuwa don haka sun cancanci tafiya cikin 'yanci a cikin kasuwannin da suka ƙunshi Tarayyar Turai (EU) da Yankin Tattalin Arziki na Turai (EEA).
Sanarwa na Daidaitawa ga EU RoHS & ISAUTAR 211 01/19/2021
Allolin Arduino suna bin umarnin RoHS 2 2011/65/EU na Majalisar Tarayyar Turai da RoHS 3 Directive 2015/863/EU na Majalisar 4 ga Yuni 2015 kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki.
| Abu | Matsakaicin iyaka (ppm) |
| Kai (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Keɓancewa: Ba a da'awar keɓancewa.
Al'amuran Arduino sun cika cikar buƙatun da ke da alaƙa na Dokokin Tarayyar Turai (EC) 1907/2006 game da Rijista, Ƙimar, Izini da Ƙuntata Sinadarai (ISA). Ba mu bayyana ko ɗaya daga cikin SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Jerin abubuwan da ke da matukar damuwa don ba da izini a halin yanzu da EHA ta fitar, yana nan a cikin duk samfuran (da kuma kunshin) a cikin adadi mai yawa a cikin taro daidai ko sama da 0.1%. A iyakar saninmu, muna kuma bayyana cewa samfuranmu ba su ƙunshi kowane abu da aka jera akan "Jerin Izini" (Annex XIV na ƙa'idodin REACH) da Abubuwan da ke da matukar damuwa (SVHC) a cikin kowane adadi mai mahimmanci kamar yadda aka ƙayyade. ta Annex XVII na jerin 'yan takara da EHA (Hukumar Sinadarai ta Turai) ta buga 1907/2006/EC.
Sanarwar Ma'adinan Rikici
A matsayin mai ba da kayayyaki na duniya na kayan lantarki da na lantarki, Arduino yana sane da wajibcinmu game da dokoki da ƙa'idodi game da Ma'adanai masu rikice-rikice, musamman Dodd-Frank Wall Street Reform and Consumer Protection Act, Sashe na 1502. Arduino ba ya samo asali ko sarrafa ma'adinan rikici kamar haka. kamar Tin, Tantalum, Tungsten, ko Zinariya. Ma'adanai masu rikice-rikice suna ƙunshe a cikin samfuranmu a cikin nau'in solder ko a matsayin sashi a cikin kayan haɗin ƙarfe. A matsayin wani ɓangare na ƙwazonmu mai ma'ana, Arduino ya tuntuɓi masu samar da kayan aikin da ke cikin sarkar kayan mu don tabbatar da ci gaba da bin ƙa'idodin. Dangane da bayanan da muka samu zuwa yanzu mun bayyana cewa samfuranmu sun ƙunshi ma'adanai masu rikice-rikice waɗanda aka samo daga wuraren da babu rikici.
BAYANIN FCC
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba
- dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.
Bayanin Bayyanar Radiation FCC RF
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
- Wannan kayan aikin ya dace da iyakokin fiddawa na RF wanda aka tsara don muhalli mara sarrafawa.
- Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo & jikin ku.
Littattafan mai amfani don na'urar rediyon da ba ta da lasisi za ta ƙunshi sanarwa mai zuwa ko makamancinta a cikin wani fili a cikin littafin jagorar mai amfani, a madadin na'urar ko duka biyun. Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- wannan na'urar bazai haifar da tsangwama ba
- dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
Gargadi na IC SAR
Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20 cm tsakanin radiyo da jikinka.
Muhimmi: Yanayin aiki na EUT ba zai iya wuce 85 ℃ ba kuma kada ya kasance ƙasa da -40 ℃.
Ta haka, Arduino Srl ya bayyana cewa wannan samfurin ya dace da mahimman buƙatu da sauran tanadin da suka dace na Directive 2014/53/EU. An ba da izinin amfani da wannan samfurin a duk ƙasashe membobin EU.
| Makadan mitar | Matsakaicin ƙarfin fitarwa (ERP) |
| 863-870Mhz | TBD |
Bayanin Kamfanin
| Sunan kamfani | Arduino Srl |
| Adireshin Kamfanin | Ta hanyar Andrea Appiani 25 20900 MONZA Italiya |
Takardun Magana
| Magana | mahada |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/software |
| Arduino IDE (Cloud) | https://create.arduino.cc/editor |
| Cloud IDE Ana Farawa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web- editor-4b3e4a |
| Dandalin | http://forum.arduino.cc/ |
| Nina B306 | https://content.u-blox.com/sites/default/files/NINA-B3_DataSheet_UBX-17052099.pdf |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Maganar Laburare | https://www.arduino.cc/reference/en/ |
Tarihin Bita
| Kwanan wata | Bita | Canje-canje |
Takardu / Albarkatu
 |
Arduino ABX00071 Nano 33 BLE Module [pdf] Jagorar mai amfani ABX00071 Nano 33 BLE Module, ABX00071, Nano 33 BLE Module, BLE Module, Module |