Abubuwan da ke ciki boye
1 APEX WAVES PXI-6733 Analog Fitar Module
2 Gabatarwa
3 Kayan aiki da Sauran Bukatun Gwaji
4 Calibrating NI 6711/6713/6731/6733
5 Ƙayyadaddun bayanai
6 Taswirar tafiya
7 Takardu / Albarkatu
7.1 Magana

APEX-WAVES-logo

APEX WAVES PXI-6733 Analog Fitar Module

APEX-WAVES-PXI-6733-Analog-Fitar-samfurin-samfurin

Gabatarwa

Wannan takaddar ta ƙunshi umarnin mataki-mataki don daidaita kayan aikin ƙasa 6711/6713/6731/6733 don na'urorin fitarwa na analog na PCI/PXI/CompactPCI (AO). Yi amfani da wannan hanyar daidaitawa tare da ni671xCal.dllfile, wanda ya ƙunshi takamaiman ayyuka da ake buƙata don daidaita na'urorin NI 6711/6713/6731/6733.
Lura Koma zuwa ni.com/support/calibrat/mancal.htm don kwafin ni671xCal.dll file.

Menene Calibration?

Calibration ya ƙunshi tabbatar da daidaiton ma'aunin na'ura da daidaita kowane kuskuren awo. Tabbatarwa shine auna aikin na'urar da kwatanta waɗannan ma'auni zuwa ƙayyadaddun masana'anta. A lokacin calibration, kuna samarwa kuma kuna karanta juzu'itage matakan ta yin amfani da ma'auni na waje, sannan ku daidaita ma'auni na daidaitawa. Ana adana sabbin ma'aunin daidaitawa a cikin EEPROM. Ana ɗora ma'aunin daidaitawa daga ƙwaƙwalwar ajiya kamar yadda ake buƙata don daidaitawa don kuskuren ma'aunin da na'urar ta ɗauka.

Me Yasa Ya Kamata Ka Calibrate?

Daidaiton kayan aikin lantarki yana tafiya tare da lokaci da zafin jiki, wanda zai iya rinjayar daidaiton auna kamar yadda na'urar ta tsufa. Daidaitawa yana mayar da waɗannan abubuwan zuwa ƙayyadaddun daidaiton su kuma yana tabbatar da cewa na'urar har yanzu ta cika ka'idojin NI.

Sau Nawa Ya Kamata Ka Yi Calibral?

Abubuwan ma'auni na aikace-aikacenku sun ƙayyade sau nawa NI 6711/6713/6731/6733 dole ne a daidaita shi don kiyaye daidaito. NI tana ba da shawarar cewa ku yi cikakkiyar daidaitawa aƙalla sau ɗaya kowace shekara. Kuna iya rage wannan tazarar zuwa kwanaki 90 ko watanni shida bisa ga bukatun aikace-aikacenku.

Zaɓuɓɓukan daidaitawa: Na waje da na ciki

NI 6711/6713/6731/6733 yana da zaɓuɓɓukan daidaitawa guda biyu: na ciki, ko daidaitawa da kai, da daidaitawa na waje.

Daidaitawar ciki

Daidaitawar ciki hanya ce mai sauƙi mafi sauƙi wacce ba ta dogara da ƙa'idodi na waje ba. A cikin wannan hanyar, ana daidaita ma'aunin daidaita na'urar dangane da madaidaicin voltage source a kan
NI 6711/6713/6731/6733. Ana amfani da irin wannan nau'in daidaitawa bayan an daidaita na'urar dangane da ma'aunin waje. Koyaya, masu canji na waje kamar zafin jiki na iya shafar ma'auni. An bayyana sabbin ma'auni na daidaitawa dangane da ma'aunin daidaitawa da aka ƙirƙira yayin daidaitawar waje, tabbatar da cewa ana iya gano ma'auni zuwa ma'auni na waje. A zahiri, daidaitawar ciki yayi kama da aikin sifili da aka samu akan multimeter na dijital (DMM).

Daidaitawar Waje

Daidaitawar waje yana buƙatar amfani da madaidaicin DMM. A lokacin daidaitawar waje, DMM tana samarwa kuma tana karanta voltages daga na'urar. Ana yin gyare-gyare ga ma'aunin daidaita na'urar don tabbatar da cewa voltages fada cikin ƙayyadaddun na'urar. Sabbin ma'aunin daidaitawa ana adana su a cikin na'urar EEPROM. Bayan an daidaita ma'auni na kan jirgin, babban madaidaicin juzu'itage tushen akan na'urar an daidaita shi. Ƙimar daidaitawa ta waje tana ba da saiti na daidaitawa wanda zaku iya amfani da shi don rama kuskuren da ke cikin ma'aunin da NI 6711/6713/6731/6733 ke ɗauka.

KYAUTATA KAYAN HIDIMAR
Muna ba da sabis na gyare-gyare na gasa da daidaitawa, da kuma takaddun samun sauƙi da albarkatun da za a iya saukewa kyauta.

SALLAR RARAR KA
Muna siyan sababbi, da aka yi amfani da su, da ba su aiki, da rarar sassa daga kowane jerin Ni. Muna samar da mafi kyawun mafita don dacewa da bukatunku ɗaya.

  • Sayar da Kuɗi
  • Samun Kiredit
  • Karɓi Yarjejeniyar Ciniki

Kayan aiki da Sauran Bukatun Gwaji

Kayan Gwaji

  • Wannan sashe yana bayyana kayan aiki, yanayin gwaji, takardu, da software da kuke buƙatar daidaita NI 6711/6713/6731/6733.
  • Don daidaita NI 6711/6713/6731/6733, kuna buƙatar babban madaidaicin DMM wanda yake aƙalla 10 ppm (0.001%) daidai. NI yana ba da shawarar amfani da Agilent 3458A DMM don daidaitawa.
  • Idan baku da Agilent 3458A DMM, yi amfani da ƙayyadaddun ƙayyadaddun bayanai don zaɓar madaidaicin daidaitawa.
  • Idan ba ku da kayan haɗin haɗin al'ada, kuna iya buƙatar toshe mai haɗawa kamar NI CB-68 da kebul kamar SH6868-D1. Waɗannan ɓangarorin suna ba ku damar shiga cikin sauƙi zuwa kowane fil akan 68-pin
    Mai haɗa I/O.

Yanayin Gwaji

Bi waɗannan jagororin don haɓaka haɗi da yanayin gwaji yayin daidaitawa:

  • Ci gaba da haɗi zuwa NI 6711/6713/6731/6733 gajere. Dogayen igiyoyi da wayoyi suna aiki azaman eriya, suna ɗaukar ƙarin ƙara, wanda zai iya shafar ma'auni.
  • Yi amfani da wayar jan karfe mai kariya don duk haɗin kebul zuwa na'urar.
  • Yi amfani da murɗaɗɗen waya don kawar da hayaniya da abubuwan zafi.
  • Kula da zafin jiki tsakanin 18 da 28 ° C. Don yin aiki da tsarin a takamaiman zafin jiki a wajen wannan kewayon, daidaita na'urar a wannan zafin.
  • Ci gaba da yanayin zafi ƙasa da 80%.
  • Bada lokacin dumama na aƙalla mintuna 15 don tabbatar da cewa da'irar ma'auni ta kasance a ingantaccen yanayin aiki.

Software

  • Saboda NI 6711/6713/6731/6733 na'urar aunawa ce ta PC, dole ne a sanya direban na'urar da ta dace a cikin tsarin daidaitawa kafin yin ƙoƙarin daidaitawa. Don wannan hanyar daidaitawa, kuna buƙatar nau'in NI-DAQ 6.9.2 ko wanda aka shigar a baya akan kwamfutar daidaitawa. NI-DAQ, wanda ke tsarawa da sarrafa NI 6711/6713/6731/6733, yana nan a ni.com/downloads.
  • NI-DAQ yana goyan bayan yarukan shirye-shirye da dama, gami da LabVIEW, LabWindows/CVI, Microsoft Visual C++, Microsoft Visual Basic da Borland C++. Lokacin shigar da direba, kawai kuna buƙatar shigar da tallafi don yaren shirye-shiryen da kuke son amfani da shi.
  • Hakanan kuna buƙatar kwafin ni671xCal.dll, ni671xCal.lib, da ni671xCal.hfiles.
  • DLL yana ba da aikin daidaitawa wanda baya zama a ciki
  • NI-DAQ, gami da ikon kare ma'aunin daidaitawa, sabunta ranar daidaitawa, da rubuta zuwa yankin daidaita masana'anta. Kuna iya samun dama ga ayyukan a cikin wannan DLL ta kowane mai tarawa 32-bit. Wurin daidaita masana'anta da kwanan ranar daidaitawa yakamata a canza shi ta dakin gwaje-gwaje na awoyi ko wani wurin da ke kiyaye matakan ganowa.

Ana saita NI 6711/6713/6731/6733

Dole ne a daidaita NI 6711/6713/6731/6733 a NI-DAQ, wanda ke gano na'urar kai tsaye. Matakan da ke gaba sun yi bayani a taƙaice yadda ake saita na'urar a NI-DAQ. Koma zuwa NI 671X/673X Manual mai amfani don cikakkun umarnin shigarwa. Kuna iya shigar da wannan jagorar lokacin da kuka shigar da NI-DAQ.

  1. Wutar da kwamfutar.
  2. Shigar da NI 6711/6713/6731/6733 a cikin ramin da ke akwai.
  3. Wutar kwamfuta.
  4. Kaddamar da Ma'auni & Automation Explorer (MAX).
  5. Saita lambar na'urar NI 6711/6713/6731/6733.
  6. Danna Abubuwan Gwaji don tabbatar da cewa NI 6711/6713/6731/6733 yana aiki da kyau.

An daidaita NI 6711/6713/6731/6733 yanzu.
Lura Bayan an saita na'ura a cikin MAX, na'urar za a sanya lambar na'ura, wanda ake amfani da shi a cikin kowane aikin da ake kira don gano ko wane na'urar DAQ za ta daidaita.

Rubutun Tsarin Calibration

  • Hanyar daidaitawa a cikin Calibrating sashin NI 6711/6713/6731/6733 yana ba da umarnin mataki-mataki kan kiran ayyukan daidaitawa da suka dace. Waɗannan ayyukan daidaitawa kiran aikin C ne daga NI-DAQ waɗanda kuma suke aiki don shirye-shiryen Microsoft Visual Basic da Microsoft Visual C++. Ko da yake LabVIEW Ba a tattauna VI a cikin wannan hanya ba, zaku iya tsarawa a cikin LabVIEW ta amfani da VI da ke da sunaye iri ɗaya zuwa kiran aikin NI-DAQ a cikin wannan hanya. Koma zuwa sashin Yawo don kwatancen lambar da aka yi amfani da ita a kowane mataki na tsarin daidaitawa.
  • Sau da yawa dole ne ka bi matakan takamaiman matakai don ƙirƙirar aikace-aikacen da ke amfani da NI-DAQ. Koma zuwa NI-DAQ Manual User User for PC Compatibles at ni.com/manualsdon cikakkun bayanai game da matakan da ake buƙata ga kowane ɗayan masu tarawa da aka goyan baya.
  • Yawancin ayyukan da aka jera a cikin tsarin daidaitawa suna amfani da masu canji waɗanda aka ayyana a cikin nidaqcns.hfile. Don amfani da waɗannan masu canji, dole ne ku haɗa da nidaqcns.hfile cikin kodi. Idan baku son amfani da waɗannan ma'anoni masu ma'ana, zaku iya bincika jerin ayyukan kira a cikin takaddun NI-DAQ da nidaqcns.hfile don tantance abin da ake buƙata ƙimar shigarwa.

Takaddun bayanai

Don bayani game da NI-DAQ, koma zuwa takaddun masu zuwa:

  • Taimakon Maganar Ayyukan NI-DAQ (Fara»Shirye-shiryen»Kayan Kayayyakin Ƙasa»NI-DAQ»Taimakon NI-DAQ)
  • NI-DAQ Manual User User don PC masu jituwa a ni.com/manuals

Waɗannan takaddun guda biyu suna ba da cikakken bayani game da amfani da NI-DAQ. Taimakon nunin aikin ya ƙunshi bayani kan ayyukan da ke ciki
NI-DAQ. Littafin mai amfani yana ba da umarni kan shigarwa da daidaita na'urorin DAQ da cikakkun bayanai kan ƙirƙirar aikace-aikacen da ke amfani da NI-DAQ. Waɗannan takaddun sune nassoshi na farko don rubuta kayan aikin daidaitawa. Don ƙarin bayani kan na'urar da kuke ƙididdigewa, kuna iya shigar da takaddun na'urar.

Calibrating NI 6711/6713/6731/6733

Don daidaita NI 6711/6713/6731/6733, kammala waɗannan matakai:

  1. Tabbatar da aikin NI 6711/6713/6731/6733. Wannan matakin, wanda aka bayyana a cikin Tabbatar da Aiki na sashin NI 6711/6713/6731/6733, yana tabbatar da ko na'urar tana cikin ƙayyadaddun bayanai kafin daidaitawa.
  2. Daidaita madaidaicin daidaitawar NI 6711/6713/6731/6733 dangane da sanannen vol.tage tushen. An bayyana wannan matakin a cikin Daidaita sashin NI 6711/6713/6731/6733.
  3. Sake tabbatar da aikin don tabbatar da cewa NI 6711/6713/6731/6733 yana aiki a cikin ƙayyadaddun sa bayan daidaitawa.

Tabbatar da Ayyukan NI 6711/6713/6731/6733

Tabbatarwa yana ƙayyade yadda na'urar ke cika ƙayyadaddun bayanai. An raba hanyar tabbatarwa zuwa manyan ayyuka na na'urar. A cikin tsarin tabbatarwa, koma zuwa teburin da ke cikin sashin Ƙididdiga don ganin ko na'urar tana buƙatar daidaitawa.

Tabbatar da Fitar Analog

Wannan hanya tana tabbatar da aikin AO na NI 6711/6713/6731/6733. NI yana ba da shawarar gwada duk tashoshi na na'urar. Koyaya, don adana lokaci, zaku iya gwada tashoshi kawai da aka yi amfani da su a cikin aikace-aikacen ku. Tabbatar cewa kun karanta sashin Kayan Aiki da Sauran Bukatun Gwaji kafin fara wannan aikin.

  1. Cire haɗin duk igiyoyi zuwa na'urar. Tabbatar cewa ba a haɗa na'urar zuwa kowane da'irori ban da waɗanda aka ƙayyade ta hanyar daidaitawa.
  2. Don daidaita na'urar a ciki, kira aikin Calibrate_E_Series tare da saita sigogi masu zuwa kamar yadda aka nuna:
    1. an saita calOP zuwa ND_SELF_CALIBRATE
    2. saitaOfCalConst zuwa ND_USER_EEPROM_AREA
    3. calRefVolts saita zuwa 0
  3. Haɗa DMM zuwa DAC0OUT kamar yadda aka nuna a Table 1.
    Fitowa Tashoshi DMM Ingantaccen Shigarwa Shigar mara kyau na DMM
    DAC0OUT DAC0OUT (fin 22) AOGND (fiti na 56)
    DAC1OUT DAC1OUT (fin 21) AOGND (fiti na 55)
    DAC2OUT DAC2OUT (fin 57) AOGND (fiti na 23)
    DAC3OUT DAC3OUT (fin 25) AOGND (fiti na 58)
    DAC4OUT DAC4OUT (fin 60) AOGND (fiti na 26)
    DAC5OUT DAC5OUT (fin 28) AOGND (fiti na 61)
    DAC6OUT DAC6OUT (fin 30) AOGND (fiti na 63)
    DAC7OUT DAC7OUT (fin 65) AOGND (fiti na 63)
    Lura: Ana ba da lambobin fil don masu haɗin I/O 68 kawai. Idan kana amfani da mai haɗin I/O mai 50, koma zuwa littafin mai amfani da na'urar don wuraren haɗin sigina.
  4. Koma zuwa tebur daga sashin Ƙayyadaddun bayanai wanda yayi daidai da na'urar da kuke tantancewa. Wannan tebur na ƙayyadaddun bayanai yana nuna duk saitunan da aka karɓa don na'urar.
  5. Kira AO_Configureto saita na'urar don lambar na'urar da ta dace, tashar, da polarity na fitarwa (na'urorin NI 6711/6713/6731/6733 suna goyan bayan kewayon fitarwa na bipolar kawai). Yi amfani da tashar 0 azaman tashar don tabbatarwa. Karanta sauran saitunan daga teburin ƙayyadaddun na'urar.
  6. Kira AO_VRubuta don sabunta tashar AO tare da daidaitaccen voltage. Voltage darajar yana cikin ƙayyadaddun tebur.
  7. Kwatanta sakamakon da aka nuna ta DMM zuwa babba da ƙananan iyakoki akan tebur ƙayyadaddun. Idan darajar ta faɗi tsakanin waɗannan iyakoki, na'urar ta ci gwajin.
  8. Maimaita matakai na 3 zuwa 5 har sai kun gwada duk dabi'u.
  9. Cire haɗin DMM daga DAC0OUT, kuma sake haɗa shi zuwa tashar ta gaba, yin haɗin kai daga Tebur 1.
  10. Maimaita matakai na 3 zuwa 9 har sai kun tabbatar da duk tashoshi.
  11. Cire haɗin DMM daga na'urar.

Yanzu kun tabbatar da tashoshin AO na na'urar.

Tabbatar da Ayyukan Counter

Wannan hanya tana tabbatar da aikin counter. Na'urorin NI 6711/6713/6731/6733 suna da lokaci guda kawai don tabbatarwa, don haka kawai kuna buƙatar tabbatar da counter 0. Domin ba za ku iya daidaita wannan lokacin ba, kuna iya tabbatar da aikin counter 0 ne kawai. Kayan aiki da Sauran Gwaji

Sashen buƙatun, sannan ku bi wannan hanya:

  1. Haɗa madaidaicin shigarwar na'urar zuwa GPCTR0_OUT (Fin 2) da kuma madaidaicin shigarwar zuwa DGND (fitin 35).
    Lura Ana ba da lambobin fil don masu haɗin I/O 68 kawai. Idan kana amfani da mai haɗin I/O mai 50, koma zuwa takaddun na'urar don wuraren haɗin sigina.
  2. Kira GPCTR_Control tare da saita mataki zuwa ND_RESET don sanya ma'ajin a cikin tsoho.
  3. Kira GPCTR_Set_Application tare da saita aikace-aikace zuwa ND_PULSE_TRAIN_GNR don daidaita ma'aunin don samar da jirgin ƙasa.
  4. Kira GPCTR_Change_Parameter tare da saita paramID zuwa ND_COUNT_1 sannan paramValue saita zuwa 2 don saita ma'ajin don fitar da bugun jini tare da lokacin kashe ns 100.
  5. Kira GPCTR_Change_Parameter tare da saita paramID zuwa ND_COUNT_2 sannan paramValue saita zuwa 2 don saita ma'ajin don fitar da bugun jini tare da lokacin 100 ns.
  6. Kira Select_Signal tare da sigina da saita tushe zuwa ND_GCTR0_OUTPUT don karkatar da siginar counter zuwa fil ɗin GPCTR0_OUT akan mahaɗin I/O na'urar.
  7. Kira GPCTR_Control tare da saita mataki zuwa ND_PROGRAM don fara haɓakar igiyoyin murabba'i. Na'urar ta fara samar da igiyoyin murabba'in 5 MHz lokacin da GPCTR_Control ya kammala aiwatarwa.
  8. Kwatanta darajar da mai ƙididdigewa ya karanta zuwa iyakar gwajin da aka nuna a cikin teburin da ya dace a cikin Ƙirar Ƙayyadaddun bayanai. Idan ƙimar ta faɗi tsakanin waɗannan iyakoki, na'urar ta wuce wannan gwajin.
  9. Cire haɗin counter daga na'urar.

Yanzu kun tabbatar da ma'aunin na'urar

Daidaita NI 6711/6713/6731/6733

Wannan hanya tana daidaita ma'aunin daidaitawar AO. A ƙarshen kowace hanyar daidaitawa, ana adana waɗannan sabbin na'urori a cikin masana'anta na na'urar EEPROM. Mai amfani na ƙarshe ba zai iya canza waɗannan ƙimar ba, wanda ke ba da matakin tsaro wanda ke tabbatar da masu amfani ba su shiga da gangan ko gyara duk wani ma'aunin daidaitawa wanda dakin gwaje-gwaje na awo ya daidaita.
Wannan mataki a cikin tsarin daidaitawa yana kiran ayyuka a NI-DAQ kuma a cikin ni671x.dll. Don ƙarin bayani kan ayyuka a ni671x.dll, koma zuwa sharhi a cikin ni671x.hfile.

  1. Cire haɗin duk igiyoyi zuwa na'urar. Tabbatar cewa ba a haɗa na'urar zuwa kowane da'irori ban da waɗanda aka ƙayyade ta hanyar daidaitawa.
  2. Don daidaita na'urar a ciki, kira aikin Calibrate_E_Series tare da saita sigogi masu zuwa kamar yadda aka nuna:
    1. an saita calOP zuwa ND_SELF_CALIBRATE
    2. saitaOfCalConst zuwa ND_USER_EEPROM_AREA
    3. calRefVolts saita zuwa 0
  3. Haɗa calibrator zuwa na'urar bisa ga Table 2.
    6711/6713/6731/6733 Fil Mai kiftawa
    EXTREF (fin 20) Fitarwa High
    AOGND (fiti na 54) Ƙarƙashin fitarwa
    Ana ba da lambobin fil don masu haɗin fil 68 kawai. Idan kana amfani da mai haɗin fil 50, koma zuwa takaddun na'urar don wuraren haɗin sigina.
  4. Don nemo ranar ƙirƙira ta ƙarshe, kira Get_Cal_Date, wanda ke cikin ni671x.dll. CalDate yana adana ranar da na'urar ta ƙare.
  5. Saita calibrator don fitar da juzu'itagda 5.0v.
  6. Kira Calibrate_E_Series tare da saita sigogi masu zuwa kamar yadda aka nuna:
    1. an saita calOP zuwa ND_EXTERNAL_CALIBRATE
    2. saitaOfCalConst zuwa ND_USER_EEPROM_AREA
    3. calRefVolts saita zuwa 5.0
      Lura Idan voltage wanda tushen ya kawo baya kiyaye tsayayyen 5.0 V, kuna samun kuskure.
  7. Kira Copy_Constto kwafin sabon madaidaicin ma'auni zuwa sashin kariya na masana'anta na EEPROM. Wannan aikin kuma yana sabunta ranar daidaitawa.
  8. Cire haɗin calibrator daga na'urar.
    Yanzu an daidaita na'urar dangane da tushen waje. Bayan an daidaita na'urar, zaku iya tabbatar da aikin AO ta maimaita sashin Tabbatar da Analog Output.

Ƙayyadaddun bayanai

Tebur masu zuwa sune ƙayyadaddun ƙayyadaddun bayanai don amfani yayin tabbatarwa da daidaitawa NI 6711/6713/6731/6733. Teburin suna nuna ƙayyadaddun ƙayyadaddun tazarar daidaitawa na shekara 1 da sa'o'i 24.

Amfani da Tables

Ma'anoni masu zuwa suna bayyana yadda ake amfani da ƙayyadaddun tebur a wannan sashe.

Rage
Range yana nufin matsakaicin da aka yarda da voltage kewayon shigarwa ko siginar fitarwa. Don misaliampHar ila yau, idan an saita na'urar a cikin yanayin bipolar tare da kewayon 20 V, na'urar na iya fahimtar sigina tsakanin +10 da -10 V.

Polarity
Polarity yana nufin tabbatacce da korau voltagsiginar shigarwar da za a iya karantawa. Bipolar yana nufin na'urar zata iya karanta duka tabbatacce da korau voltage. Unipolar yana nufin cewa na'urar zata iya karanta kawai tabbatacce voltage.

Batun Gwaji
Wurin gwaji shine voltage darajar da aka shigar ko fitarwa don dalilai na tabbatarwa. An rarraba wannan ƙimar zuwa Wuri da Ƙimar. Wuri yana nufin inda ƙimar gwajin ta dace a cikin kewayon gwajin. Pos FS yana nufin tabbataccen cikakken ma'auni, kuma Neg FS yana nufin cikakken ma'auni mara kyau. Ƙimar tana nufin voltage don tabbatarwa, kuma Zero yana nufin fitar da sifili volts.

Tsawon Sa'o'i 24
Shagon kewayon sa'o'i 24 ya ƙunshi manyan iyakoki da ƙananan iyakoki don ƙimar maki gwaji. Idan an daidaita na'urar a cikin sa'o'i 24 da suka gabata, ƙimar gwajin gwajin ya kamata ta faɗo tsakanin sama da ƙananan ƙimar iyaka. Waɗannan ƙimar iyaka ana bayyana su a cikin volts.

Tsawon Shekara 1
Shagon kewayon shekara 1 ya ƙunshi manyan iyakoki da ƙananan iyakoki don ƙimar maki gwaji. Idan an daidaita na'urar a cikin shekarar da ta gabata, ƙimar gwajin gwajin ya kamata ta faɗi tsakanin maɗaukakiyar ƙimar iyaka da babba. Ana bayyana waɗannan iyakoki a cikin volts.

Ma'auni
Saboda ba za ku iya daidaita ƙudurin masu ƙididdigewa ba, waɗannan ƙimar ba su da lokacin daidaitawa na shekara 1 ko 24. Koyaya, ana ba da wurin gwajin da babba da ƙananan iyaka don dalilai na tabbatarwa.

 

 

 

Rage (V)

  

 

 

Polarity

 Gwaji Nuna Tsawon Sa'o'i 24 Tsawon Shekara 1
 

Wuri

  

Daraja (V)

 Kasa Iyaka (V) Na sama Iyaka (V) Kasa Iyaka (V) Na sama Iyaka (V)
0 Bipolar Sifili 0.0 -0.0059300 0.0059300 -0.0059300 0.0059300
20 Bipolar Pos FS 9.9900000 9.9822988 9.9977012 9.9818792 9.9981208
20 Bipolar Na FS -9.9900000 -9.9977012 -9.9822988 -9.9981208 -9.9818792
 

 

 

Rage (V)

  

 

 

Polarity

 Gwaji Nuna Tsawon Sa'o'i 24 Tsawon Shekara 1
 

Wuri

  

Daraja (V)

 Kasa Iyaka (V) Na sama Iyaka (V) Kasa Iyaka (V) Na sama Iyaka (V)
0 Bipolar Sifili 0.0 -0.0010270 0.0010270 -0.0010270 0.0010270
20 Bipolar Pos FS 9.9900000 9.9885335 9.9914665 9.9883636 9.9916364
20 Bipolar Na FS -9.9900000 -9.9914665 -9.9885335 -9.9916364 -9.9883636
Saita Point (MHz) Babban Iyaka (MHz) Ƙananan Iyaka (MHz)
5 4.9995 5.0005

Taswirar tafiya

Waɗannan sharuɗɗa masu gudana suna nuna dacewa da aikin NI-DAQ don tabbatarwa da daidaitawa NI 6711/6713/6731/6733. Koma zuwa Calibrating sashin NI 6711/6713/6731/6733, NI-DAQ Reference Reference Help (Fara»Shirye-shiryen»Taimakon Kasa»NI-DAQ»NI-DAQ Taimako), da kuma NI-DAQ User Manual don PC Compatible a ni.com/manuals don ƙarin bayani kan tsarin software.

Tabbatar da Fitar AnalogAPEX-WAVES-PXI-6733-Analog-Fitarwa-Module-fig- (1)

Tabbatar da CounterAPEX-WAVES-PXI-6733-Analog-Fitarwa-Module-fig- (2)

Daidaita NI 6711/6713/6731/6733APEX-WAVES-PXI-6733-Analog-Fitarwa-Module-fig- (3)

© National Instruments Corporation
Ni 6711/6713/6731/6733 Tsarin daidaitawa

Ƙaddamar da rata tsakanin masana'anta da tsarin gwajin gadonku.
1-800-915-6216
www.apexwaves.com
sales@apexwaves.com
HARDWARE DA KARSHEN DA AKE YI A STOCK & SHIRYE ZUWA
Muna haja Sabo, Sabbin Ragi, Gyarawa, da Sake Gyaran Kayan Hardware NI.
Duk alamun kasuwanci, tambura, da sunaye na masu mallakar su ne.
Nemi Magana Saukewa: PXI-6733

Takardu / Albarkatu

APEX WAVES PXI-6733 Analog Fitar Module [pdf] Jagorar mai amfani
PXI-6733 Analog Output Module, PXI-6733, Analog Fitar Module, Fitar Module, Module
APEX WAVES PXI-6733 Analog Fitar Module [pdf] Jagorar mai amfani
PXI-6733 Analog Output Module, PXI-6733, Analog Fitar Module, Fitar Module, Module

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *