Bayanin samfur

• Mai kula da bangon bangon Bidiyo na Angustos babban kayan aiki ne na kayan aikin bidiyo tare da ƙirar ƙirar kayan masarufi. Yana kawar da buƙatar ƙayyadaddun bayanai na kwamfuta, katunan GPU, lasisi, kuma yana rage haɗarin faɗuwar OS mai shuɗi, ƙwayoyin cuta, da harin ransomware. Mai sarrafawa yana goyan bayan shigarwar har zuwa 152 da abubuwan 144, yana sa ya dace da saitin bangon bidiyo mai girma.
• Mai sarrafa yana da keɓaɓɓen guntuwar Ƙofar Shirye-shiryen Ƙofar Ƙofar (FPGA) wanda aka kera musamman don sarrafa bidiyo. Wannan yana kawar da iyakokin software na al'ada ko masu kula da PC waɗanda suka dogara da CPUs ko GPUs. Chipset ɗin FPGA yana ba da damar yin aiki mai zaman kansa na kowane guntu na FPGA, yana bawa masu amfani damar maye gurbin ko ƙara sabbin katunan shigarwa/fitarwa ba tare da kashe duka chassis ba.
• Tsarin tsari na mai sarrafawa yana goyan bayan zaɓuɓɓukan haɗi daban-daban, gami da HDMI, DVI, VGA, HDBaseT, da kwararar IP. Wannan sassauci yana ba abokan ciniki damar tsara tsarin su don dacewa da takamaiman bukatun su. Har ila yau, mai sarrafawa yana rage yawan kuɗin zuba jari ta hanyar sauƙaƙe tsarin fadadawa da kuma tallafawa kula da ganuwar bidiyo da yawa.
• Ƙarin fasalulluka sun haɗa da goyan baya ga Multi Layers MPiPTM (Hoton Matrix a cikin Hoto) tare da har zuwa yadudduka 2 a kowane allo, sauƙi mai sauƙi tare da ja da sauke ayyuka don rikitattun shimfidu, haɗuwa, yawo, shimfiɗawa, zuƙowa ciki / waje na abun ciki na bangon bidiyo , allon taɓawa na gaba don sarrafa yanayin yanayi, profile adanawa / tunawa, da saitin saitin IP.
• Mai sarrafawa kuma yana goyan bayan yawo kai tsaye kamara ta IP, hotunan bangon baya, rubutun gungurawa, tsara jadawalin, da sigina pre.view. Yana da tsaftataccen tsarin kayan masarufi tare da fasahar FPGA, sauyawa maras kyau tare da ganowar EDID ta atomatik, ramuwar bezel tare da ma'auni, da fasalulluka na zaɓi kamar rubutun gungurawa, girman hali, ƙarancin wutar lantarki, da ƙari.
• Girman chassis shine 3U, yana auna 440 x 350 x 133 mm. Yana goyan bayan HDCP EDID 1.3 / 1.4 / 2.2 auto-shirin, matsakaicin adadin bayanai na 15.2 Gbps, da mashigai na shigarwa / fitarwa daban-daban ciki har da VGA, CVBS, YPbPR, SDI, IP HDBaseT, DVI, DP, da HDMI. Mai sarrafawa zai iya ɗaukar ƙuduri har zuwa 1920 x 1200 @ 60 Hz -8 Bit RGBA don shigarwa da fitarwa, kuma yana goyan bayan yadudduka na abun ciki. Yana aiki akan wutar lantarki na 100 ~ 240V, 50-60 Hz.
• Zaɓuɓɓukan sarrafawa sun haɗa da IP, RS-232, da allon taɓawa (na zaɓi), kuma yanayin zafin aiki shine -20oC zuwa +70oC tare da kewayon zafi na 10% zuwa 90%.

Umarnin Amfani da samfur

1. Haɗa Mai kula da bangon bangon Bidiyo na Angustos High-End zuwa allon nunin da ake so ta amfani da mashigai masu dacewa da shigarwa/fitarwa kamar VGA, DVI, HDMI, da sauransu.
2. Tabbatar cewa an haɗa wutar lantarki kuma an kunna mai sarrafawa.
3. Yi amfani da allon taɓawa na gaban panel ko zaɓuɓɓukan sarrafawa na IP/RS-232 don saita yanayin yanayin da ake so, adanawa / tuna profiles, kuma saita saitunan IP.
4. Don ƙirƙirar shimfidar bangon bidiyo, yi amfani da ja da sauke ayyuka ta danna abun cikin da ake so kuma sanya shi a matsayin da ake so akan allon.
5. Keɓance hadaddun shimfidu ta hanyar jerawa, yawo, miƙewa, zuƙowa ciki/fiye da abun ciki na bangon bidiyo kamar yadda ake buƙata.
6. Idan ana amfani da kyamarori na IP, tabbatar da cewa an haɗa katin shigar da IP daidai da mai sarrafawa kuma saita saitunan don tallafawa ciyarwar bidiyo kai tsaye daga kyamarorin IP CCTV.
7. Idan ana so, ƙara hotunan bango ko gungurawa rubutu zuwa bangon bidiyo ta hanyar daidaita saitunan daidai.
8. Yi amfani da fasalin tsarawa don saita yanayin yanayi don talla ko dalilai na sa hannu na dijital.
9. Preview siginar don tabbatar da an nuna shi daidai akan bangon bidiyo (na zaɓi).
10. Don masu amfani da ci gaba, ɗauki advantage na ƙarin fasalulluka kamar girman hali, ƙarancin wutar lantarki, da ƙari.