LS XGF-SOEA Mai Kula da Hankali Mai Shirye-shirye

Wannan jagorar shigarwa yana ba da bayanin ayyuka masu sauƙi na sarrafa PLC. Da fatan za a karanta a hankali wannan takardar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta matakan tsaro da sarrafa samfuran da kyau.

Kariyar Tsaro

Ma'anar rubutun gargaɗi da taka tsantsan

GARGADI yana nuna yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani.
HANKALI yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici.
Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci.

GARGADI

1. Kada a tuntuɓi tashar yayin amfani da wutar.
2. Kare samfurin daga shiga cikin kayan karafa na kasashen waje.
3. Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).

HANKALI

1. Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi.
2. Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tasha tare da ƙayyadadden kewayon juzu'i.
3. Kada a shigar da abubuwa masu ƙonewa akan kewaye.
4. Kada kayi amfani da PLC a cikin mahallin girgiza kai tsaye.
5. Sai dai ma'aikatan sabis na ƙwararru, kar a sake haɗawa ko gyara ko gyara samfurin.
6. Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
7. Tabbatar cewa lodin waje bai wuce kimar tsarin aikin fitarwa ba.
8. Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.

Yanayin Aiki

Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.

A'a	Abu	Ƙayyadaddun bayanai					Daidaitawa
1	Nau'in yanayi	0 ~ 55 ℃					–
2	Yanayin ajiya.	-25 ~ 70 ℃					–
3	Yanayin yanayi	5 ~ 95% RH, mara sanyaya					–
4	Yanayin ajiya	5 ~ 95% RH, mara sanyaya					–
5	Resistance Vibration	Jijjiga lokaci-lokaci				–	–
		Yawanci	Hanzarta				Saukewa: IEC61131-2
		5≤f<8.4㎐	–		3.5mm ku	Sau 10 a kowace hanya don X da Z
		8.4≤f≤150㎐	9.8 (1 g)		–
		Ci gaba da girgiza
		Yawanci	Yawanci	Yawanci
		5≤f<8.4㎐	–	1.75mm ku
		8.4≤f≤150㎐	4.9 (0.5 g)	–

Software na Tallafi Mai Aiwatarwa

Don tsarin tsarin, sigar mai zuwa ya zama dole.

1. XGI CPU: V3.8 ko sama
2. XGK CPU: V4.2 ko sama
3. XGR CPU: V2.5 ko sama
4. XG5000 Software: V3.68 ko sama

Sunan sassan da Girma (mm)

Wannan bangare ne na gaba na CPU. Koma zuwa kowane suna lokacin tuƙi tsarin. Don ƙarin bayani, koma zuwa littafin mai amfani.

Shigarwa / Cire Modules

Anan yayi bayanin hanyar haɗa kowane samfur zuwa tushe ko cire shi.
Tsarin shigarwa

1. Zamar da ɓangaren sama na module don daidaitawa zuwa tushe, sa'an nan kuma daidaita shi zuwa tushe ta amfani da ƙayyadaddun ƙirar ƙirar.
2. Ja babban ɓangaren tsarin don bincika idan an shigar dashi zuwa tushe gaba ɗaya.

Cire module

1. Sake kafaffen sukurori na babban ɓangaren module daga tushe.
2. Riƙe ƙirar da hannaye biyu kuma danna ƙayyadadden ƙugiya na module sosai.
3. Ta latsa ƙugiya, ja babban ɓangaren module daga axis na ƙananan ɓangaren module.
4. Ta hanyar ɗaga ƙirar zuwa sama, cire ƙayyadadden tsinkaya na module daga ramin gyarawa.

Ƙayyadaddun Ayyuka

Ƙayyadaddun ayyuka sune kamar haka.

Abu	Ƙayyadaddun bayanai
Ƙarfin ƙwaƙwalwa	1Mbit ku
Lokacin aukuwa	Lokacin ciki: lokacin PLC Lokaci na waje: Lokacin uwar garken lokacin waje
Ƙaddamarwa (daidaitacce)	Lokacin ciki: 1ms (daidai: ± 2ms) Lokacin waje: 1ms (daidai: ± 0.5ms)
Wurin shigarwa	maki 32 (nau'in daidaitawa/nau'in tushe)
Ƙarin ayyuka	Maki 32 nunin Kunnawa/kashewa na na'urar U
Max no. na lambobin sadarwa	maki 512 (module 16)

Waya

Rigakafin wayoyi

1. Kar a sanya layin wutar AC kusa da layin siginar shigarwa na waje. Ya kamata ya zama mafi nisa fiye da ƙaramar 100mm tsakanin layin biyu don kada amo da filin maganadisu ya shafe su.
2. Za a zaɓi kebul saboda la'akari da yanayin zafin jiki da kuma izinin halin yanzu, wanda girmansa bai gaza max ba. Matsayin kebul na AWG22 (0.3㎟).
3. Kada ka sanya kebul ɗin kusa da na'urar da kayan zafi ko a cikin hulɗar kai tsaye da mai na dogon lokaci, wanda zai haifar da lalacewa ko aiki mara kyau saboda gajeriyar kewayawa.
4. Bincika polarity lokacin yin waya da tashar tashar.
5. Waya tare da high-voltage layi ko layin wutar lantarki na iya haifar da cikas wanda ke haifar da mummunan aiki ko lahani.
6. Yi amfani da kebul na AWG24(0.3㎟) da ke sama tare da murɗaɗɗen kariya da kariya lokacin sadarwa RS-422 ta IRIG-B.
7. Ƙayyade max ɗin kebul. tsayi da kumburi ta ƙayyadaddun lokaci na Timeserver na RS-422(IRIG-B).
8. Idan ba a keɓe siginar tashar Timeserver ba, yi amfani da keɓancewar RS-422 saboda amo. Jinkirin wucewa na mai keɓewa dole ne ya kasance tsakanin 100㎲.
9. Kar a yi amfani da keɓewa wanda ke da aikin tare da nazarin siginar bayanai da aika shi.

Wayoyi Example

1. Girman kebul na na'urar I/O yana iyakance zuwa 0.3 ~ 2 mm2 amma ana bada shawarar zaɓar girman (0.3 mm2) don amfani da dacewa.
2. Da fatan za a ware layin siginar shigarwa daga layin siginar fitarwa..
3. Layukan siginar I/O yakamata su kasance masu wayoyi 100mm kuma fiye da nisa daga babban voltage/high current main circuit cable.
4. Ya kamata a yi amfani da kebul na garkuwar garkuwa kuma a yi ƙasa a gefen PLC sai dai idan babban kebul ɗin kewayawa da kebul na wutar lantarki ba zai iya keɓanta ba.
5. Lokacin da ake amfani da wayoyi na bututu, tabbatar da nisa da bututun.
6. Ya kamata a ware layin fitarwa na DC24V daga kebul na AC110V ko kebul na AC220V.

Garanti

• Lokacin garanti shine watanni 36 daga ranar da aka yi.
• Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
• Keɓancewa daga garanti
  1. Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
  2. Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
  3. Rashin gazawar abubuwan waje marasa alaƙa da samfurin
  4. Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
  5. Amfani da samfurin ta hanyoyin da ba a yi niyya ba
  6. Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
  7. Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
• Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
• Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.

Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000989 V4.5 (2024.06)
Imel: automation@ls-electric.com

Headquarter/Ofishin Seoul	Lambar waya: 82-2-2034-4033,4888,4703
Ofishin LS ELECTRIC Shanghai (China)	Lambar waya: 86-21-5237-9977
LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)	Lambar waya: 86-510-6851-6666
LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)	Lambar waya: 84-93-631-4099
LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE)	Lambar waya: 971-4-886-5360
LS ELECTRIC Turai BV (Hoofddorf, Netherlands)	Lambar waya: 31-20-654-1424
LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)	Lambar waya: 81-3-6268-8241
LS ELECTRIC America Inc. (Chicago, Amurka)	Waya: 1-800-891-2941

• Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea

Takardu / Albarkatu

LS XGF-SOEA Mai Kula da Hankali Mai Shirye-shirye [pdf] Jagoran Shigarwa XGF-SOEA Mai Gudanar da Dabarun Shirye-shiryen, XGF-SOEA, Mai Kula da Dabarun Shirye-shiryen, Mai sarrafa dabaru, Mai sarrafawa

Magana

• Manual mai amfani