LS XGF-AH6A Mai Kula da Dabarun Shirye-shiryen

Wannan jagorar shigarwa yana ba da bayanin aiki mai sauƙi akan sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta matakan tsaro da sarrafa samfuran yadda ya kamata.

Kariyar Tsaro

Ma'anar rubutun gargaɗi da taka tsantsan
GARGADI
yana nuna yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani.

HANKALI
yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici. Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci.

GARGADI

1. Kada a tuntuɓi tashar yayin amfani da wutar.
2. Kare samfurin daga shiga cikin abubuwan ƙarfe na waje.
3. Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).

HANKALI

1. Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi.
2. Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tashar tare da ƙayyadadden kewayon juzu'i.
3. Kada a shigar da abubuwa masu ƙonewa a cikin kewaye.
4. Kar a yi amfani da PLC a cikin yanayin girgiza kai tsaye.
5. Ban da ma'aikatan sabis na ƙwararru, kar a sake haɗa gyara ko gyara samfurin.
6. Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
7. Tabbatar cewa nauyin waje bai wuce ƙimar samfurin fitarwa ba.
8. Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.

Yanayin Aiki

Don shigarwa, kiyaye sharuɗɗan da ke ƙasa

Software na Tallafi Mai Aiwatarwa
Don tsarin tsarin, sigar mai zuwa ya zama dole.

1. XGI CPU: V2.1 ko sama
2. XGK CPU: V3.0 ko sama
3. XGR CPU: V1.3 ko sama
4. XG5000 Software: V3.1 ko sama

Sunan sassan da Girma (mm)

Wannan shine bangaren gaba na CPU. Koma zuwa kowane suna lokacin tuƙi tsarin. Don ƙarin bayani, koma zuwa littafin mai amfani.

Shigarwa / Cire Modules

Anan yayi bayanin hanyar haɗa kowane samfur zuwa tushe ko cire shi.

1. Tsarin shigarwa
2. Zamar da ɓangaren sama na ƙirar don gyara shi zuwa tushe, sa'an nan kuma ya dace da tushe ta hanyar amfani da madaidaicin madaidaicin module.
3. Ja babban ɓangaren tsarin don bincika idan an shigar da shi zuwa tushe gaba ɗaya.
4. Cire module
5. Sake kafaffen sukurori na babban ɓangaren ƙirar daga tushe.
6. Riƙe ƙirar da hannaye biyu kuma danna ƙayyadadden ƙugiya na ƙirar sosai.
7. Ta hanyar latsa ƙugiya, cire ɓangaren sama na ƙirar daga axis na ƙananan ɓangaren tsarin.
8. Ta hanyar ɗaga ƙirar zuwa sama, cire ƙayyadadden tsinkaya na ƙirar daga ramin gyarawa.

Ƙayyadaddun Ayyuka

Waya
Rigakafin wayoyi

1. Kar a bar layin wutar AC kusa da layin siginar shigarwa/fitarwa na waje. Tare da isasshen tazara a tsakanin su, ba za ta kasance ba tare da hayaniya ko ƙara ba.
2. Za a zaɓi kebul saboda la'akari da yanayin zafin yanayi da kuma damar halin yanzu. Fiye da AWG22 (0.3㎟) ana ba da shawarar.
3. Kada ka bari kebul ɗin ya kasance kusa da na'urar zafi da kayan aiki ko a cikin hulɗar kai tsaye tare da man fetur na dogon lokaci, wanda zai haifar da lalacewa ko aiki mara kyau saboda gajeren lokaci.
4. Bincika polarity lokacin yin waya da tashar tashar.
5. Waya tare da high-voltage layi ko layin wutar lantarki na iya haifar da cikas wanda ke haifar da mummunan aiki ko lahani.

Waya examples

Voltage shigar

1. Yi amfani da waya mai karewa mai jujjuyawa 2-sake.
2. Juriya na shigarwa voltage shigarwar shine 250Ω (nau'i).
3. Shigar da juriya na shigarwa na yanzu shine 1㏁(min.).

Garanti

• Lokacin garanti: watanni 18 bayan kwanan watan samarwa.
• Girman Garanti: Akwai garanti na watanni 18 ban da:
• Matsalolin da ke haifar da rashin dacewa yanayi, muhalli ko magani ban da umarnin LS ELCECTIC.
• Matsalolin da na'urorin waje ke haifarwa su ne matsalolin da ake samu ta hanyar yin gyare-gyare ko gyara bisa ga ra'ayin mai amfani.
• Matsalolin da ke haifar da rashin amfani da samfur
• Matsalolin da suka haifar da dalilin da ya zarce abin da ake tsammani daga matakin kimiyya da fasaha lokacin da LS ELECTRIC ke ƙera samfurin.
• Matsalolin da bala'o'i ke haifarwa

Canje-canje a cikin ƙayyadaddun bayanai

Ƙayyadaddun samfur na iya canzawa ba tare da sanarwa ba saboda ci gaba da haɓaka samfur da haɓakawa. Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000984 V4.4 (2021.11)

• Imel: automation@ls-electric.com
• Hedikwata/Ofishin Seoul Tel: 82-2-2034-4033,4888,4703
• Ofishin LS ELECTRIC Shanghai (China) Tel: 86-21-5237-9977
• LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
• LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
• LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE) Tel: 971-4-886-5360
• LS ELECTRIC Turai BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
• LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, Amurka) Tel: 1-800-891-2941
• Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

Takardu / Albarkatu

LS XGF-AH6A Mai Kula da Dabarun Shirye-shiryen [pdf] Jagoran Shigarwa XGF-AH6A Mai Sarrafa Ma'auni, XGF-AH6A, Mai sarrafa dabaru, Mai sarrafa dabaru, Mai sarrafawa

Magana

• Manual mai amfani