Saukewa: V2403C
Jagorar Shigarwa Mai sauri
Cikakkun Kwamfutoci
Shafin 1.1, Fabrairu 2022
Bayanin Tuntuɓar Tallafin Fasaha
www.moxa.com/support
Ƙarsheview
Kwamfutocin da aka saka na V2403C Series sun dogara ne akan Intel® 7th processor processor da fasalin 4 RS-232/422/485 serial ports, 4 LAN ports, and 4 USB 3.0 ports. Kwamfutocin V2403C sun zo tare da 1 DisplayPort da 1 HDMI tashar jiragen ruwa tare da tallafin ƙudurin 4-k, suna cika buƙatu daban-daban don aikace-aikacen masana'antu.
Ramin mSATA, masu haɗin SATA, da tashoshin USB suna ba da kwamfutocin V2403C tare da amincin da ake buƙata don aikace-aikacen masana'antu waɗanda ke buƙatar faɗaɗa ajiya don adana bayanai.
Kunshin Dubawa
Ana jigilar kowane fakitin ƙirar tsarin asali tare da abubuwa masu zuwa:
- V2403C Series na'ura mai kwakwalwa
- Kayan girke bango
- Kunshin tire na faifai ma'ajiya
- HDMI na USB makullin
- Jagoran shigarwa mai sauri (buga)
- Katin garanti
Shigar Hardware
Gaba View
Girma
LED Manuniya
Tebu mai zuwa yana bayyana ma'aunin LED dake kan gaba da na baya na kwamfutar V2403C.
| LED Name | Matsayi | Aiki |
| Ƙarfi
(Akan wuta button) |
Kore | An kunna wuta |
| Kashe | Babu shigarwar wuta ko wani kuskuren wuta | |
| Ethernet
(100 Mbps) (1000 Mbps) |
Kore | A tsaye A kunne: 100 Mbps hanyar haɗin Ethernet Kiftawa: Ana ci gaba da watsa bayanai |
| Yellow | A tsaye A kan hanyar haɗin Ethernet na 1000 Mbps Kibta: Ana ci gaba da watsa bayanai | |
| Kashe | Gudun watsa bayanai a 10 Mbps ko kebul ba a haɗa shi ba | |
| Serial (TX/RX) | Kore | Tx: Ana ci gaba da watsa bayanai |
| Yellow | Rx: Karbar Bayanai | |
| Kashe | Babu aiki | |
| Adana | Yellow | Ana samun damar bayanai daga ko dai mSATA ko na'urorin SATA |
| Kashe | Ba a samun isa ga bayanai daga ma'ajin ajiya |
Saukewa: V2403C
Kwamfutar V2403C ta zo da maƙallan hawa bango biyu. Haɗa maƙallan zuwa kwamfutar ta amfani da sukurori huɗu a kowane gefe. Tabbatar cewa an haɗa maƙallan masu hawa zuwa kwamfutar V2403C ta hanyar da aka nuna a cikin adadi mai zuwa.
An haɗa sukurori takwas don maƙallan hawa a cikin fakitin samfur. Su daidaitattun IMS_M3x5L sukurori ne kuma suna buƙatar juzu'i na 4.5 kg-cm. Dubi misalin da ke gaba don cikakkun bayanai.
Yi amfani da sukurori guda biyu (M3*5L ana bada shawarar) kowane gefe don haɗa V2403C zuwa bango ko hukuma. Kunshin samfurin ba ya haɗa da sukurori huɗu da ake buƙata don haɗa kayan hawan bango zuwa bango; suna buƙatar siyan su daban. Tabbatar cewa an shigar da kwamfutar V2403C ta hanyar da aka nuna a cikin adadi mai zuwa.
Haɗa Wutar
Ana ba da kwamfutocin V2403C tare da haɗin shigar da wutar lantarki mai 3-pin a cikin toshe tasha a gaban panel. Haɗa igiyoyin wutar lantarki zuwa masu haɗawa sannan kuma ƙara ƙara masu haɗin. Danna maɓallin wuta.
The Ƙarfi LED (a kan maɓallin wuta) zai haskaka don nuna cewa ana ba da wutar lantarki ga kwamfutar. Ya kamata ya ɗauki kimanin daƙiƙa 30 zuwa 60 don tsarin aiki don kammala aikin taya.
| Fil 1 | Ma'anarsa |
| 1 | V+ |
| 2 | V- |
| 3 | Kunnawa |
An ba da ƙayyadaddun shigar da wutar lantarki a ƙasa:
• Ma'aunin tushen wutar lantarki na DC shine 12 V @ 5.83 A, 48 V @ 1.46 A, kuma mafi ƙarancin 18 AWG.
Don kariyar karuwa, haɗa mai haɗin ƙasa da ke ƙasa da mai haɗin wuta tare da ƙasa (ƙasa) ko saman ƙarfe.
Bugu da ƙari, akwai maɓalli mai sarrafa wuta a gaban panel, wanda za'a iya amfani dashi don sarrafa shigar da wutar lantarki. Koma zuwa Littafin Mai Amfani da Hardware V2403C don cikakkun bayanai.
Haɗin Nuni
V2403C yana da mai haɗin tashar tashar nuni 1 akan bangon baya. Bugu da kari, an kuma bayar da wani haɗin gwiwar HDMI a kan bangon baya.
NOTE Domin samun ingantaccen abin dogaro da yawo na bidiyo, yi amfani da fitattun igiyoyi masu ingancin HDMI.
USB Ports
V2403C ya zo tare da 4 USB 3.0 tashar jiragen ruwa a gaban panel. Ana iya amfani da tashoshin jiragen ruwa na USB don haɗawa da wasu abubuwan da ke kewaye, kamar keyboard, linzamin kwamfuta, ko filasha don faɗaɗa ƙarfin ajiyar tsarin.
Serial Ports
V2403C ya zo da 4 software-zaɓi RS-232/422/485 serial tashar jiragen ruwa a kan raya panel. Tashar jiragen ruwa suna amfani da haɗin haɗin maza na DB9. Koma zuwa tebur mai zuwa don ayyukan fil:
| Pin | Saukewa: RS-232 | Saukewa: RS-422 | Saukewa: RS-485 (4-waya) |
Saukewa: RS-485 (2-waya) |
| 1 | D.C.D. | TDA (-) | TDA (-) | |
| 2 | RxD | TxDB(+) | TxDB(+) | |
| 3 | TXD | RxDB(+) | RxDB(+) | DataB(+) |
| 4 | DTR | RxDA(-) | RxDA(-) | DataA(-) |
| 5 | GND | GND | GND | GND |
| 6 | Farashin DSR | |||
| 7 | RTS | |||
| 8 | CTS |
Ethernet Ports
V2403C yana da 4 100/1000 Mbps RJ45 Ethernet tashar jiragen ruwa tare da masu haɗin RJ45 a gaban panel. Koma zuwa tebur mai zuwa don ayyukan fil:
| Pin | 10/100 Mbps | 1000 Mbps |
| 1 | ETx+ | TRD(0)+ |
| 2 | ETx- | TRD (0)- |
| 3 | ERx+ | TRD(1)+ |
| 4 | – | TRD(2)+ |
| 5 | – | TRD (2)- |
| 6 | ERx- | TRD (1)- |
| 7 | – | TRD(3)+ |
| 8 | – | TRD (3)- |
NOTE Don amintaccen haɗin Ethernet, muna ba da shawarar ba da damar tashoshin jiragen ruwa a daidaitattun yanayin zafi da kiyaye su a cikin mahalli masu girma/ƙananan zafi.
Abubuwan Shiga na Dijital/Fitowar Dijital
V2403C yana zuwa tare da shigarwar dijital 4 da abubuwan dijital 4 a cikin toshe tasha. Koma zuwa alkaluman da ke gaba don ma'anar fil da ƙimar halin yanzu.
| Abubuwan Shiga na Dijital Busassun Tuntuɓar Hankali 0: Short to Kasa Hankali 1: Buɗe Rigar Tuntuɓa (DI zuwa COM) Hankali 1: 10 zuwa 30 VDC Hankali 0: 0 zuwa 3 VDC |
Abubuwan Dijital Ƙididdiga na Yanzu: 200 mA da tashar Voltage: 24 zuwa 30 VDC |
Don cikakkun hanyoyin wayoyi, koma zuwa Littafin Mai amfani na Hardware V2403C.
Sanya Fayilolin Ajiye
V2403C ya zo da soket ɗin ajiya mai girman inci 2.5, yana ba masu amfani damar shigar da diski biyu don ajiyar bayanai.
Bi waɗannan matakan don shigar da rumbun kwamfutarka.
- Cire tiren faifan ma'adanar ajiya
- Sanya faifan diski akan tire. daga kunshin samfurin.
- Juya tsarin faifai da tire kusa da su view gefen baya na tire. A ɗaure sukurori huɗu don amintar da faifan zuwa tire.
- Cire duk sukurori akan sashin baya na kwamfutar V2403C.
- Fitar da murfin baya na kwamfutar kuma nemo wurin ajiyar faifan faifan. Akwai kwasfa biyu don tiren faifan ajiya; za ka iya shigar da su a kan kowane soket.
- Don sanya tiren faifan ajiya, sanya ƙarshen tiren kusa da tsagi akan soket.
- Sanya tiren akan soket ɗin kuma danna sama domin masu haɗawa akan tire ɗin faifai da soket ɗin za a iya haɗa su. A ɗaure sukurori biyu a ƙasan tiren.
Don umarni kan shigar da wasu na'urori na gefe ko na'urorin mara waya, koma zuwa Littafin Mai amfani na Hardware V2403C.
NOTE An yi nufin shigar da wannan kwamfutar a cikin ƙayyadadden wuri kawai. Bugu da kari, saboda dalilai na tsaro, ya kamata a girka kwamfutar da kuma sarrafa ta ta ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararru kawai.
NOTE An ƙera wannan kwamfutar don ba da ita ta kayan aikin da aka jera waɗanda aka ƙididdige su 12 zuwa 48 VDC, mafi ƙarancin 5.83 zuwa 1.46 A, da ƙaramar Tma=70˚C. Idan kuna buƙatar taimako tare da siyan adaftar wutar lantarki, tuntuɓi ƙungiyar tallafin fasaha ta Moxa.
NOTE Idan ana amfani da adaftan Class I, adaftar wutar lantarki yakamata a haɗa shi zuwa madaidaicin soket tare da haɗin ƙasa ko igiyar wutar lantarki da adaftar dole ne su bi aikin Class II.
Maye gurbin Baturi
V2403C ya zo tare da rami ɗaya don baturi, wanda aka sanya shi tare da baturin lithium tare da ƙayyadaddun 3 V/195 mAh. Don maye gurbin baturin, bi matakan da ke ƙasa:
- Murfin baturi yana kan sashin baya na kwamfutar.
- Buɗe sukurori biyu akan murfin baturin.
- Cire murfin; an haɗa baturin zuwa murfin.
- Ware mai haɗawa kuma cire sukurori biyu akan farantin karfe.
- Maye gurbin sabon baturi a cikin mariƙin baturi, sanya farantin karfe a kan baturin, sa'annan ku ɗaure sukurori biyu sosai.
- Sake haɗa mai haɗawa, sanya mariƙin baturi a cikin ramin, kuma amintaccen murfin ramin ta ɗaure sukullun biyu akan murfin.
NOTE • Tabbatar yin amfani da daidaitaccen nau'in baturi. Batirin da ba daidai ba zai iya haifar da lalacewar tsarin. Tuntuɓi ma'aikatan goyan bayan fasaha na Moxa don taimako, idan ya cancanta.
• Don rage haɗarin wuta ko konewa, kar a tarwatsa, murkushe, ko huda baturin; kar a jefar da shi a cikin wuta ko ruwa, kuma kada ku gajarta tuntuɓar waje.
HANKALI
Kafin haɗa V2403C zuwa abubuwan shigar da wutar lantarki na DC, tabbatar da tushen wutar lantarki voltage ya tabbata.
ƙwararren mutum ne zai shigar da wayoyi don toshewar tashar shigarwa.
• Nau'in waya: Cu
Yi amfani da girman waya na 28-18 AWG kawai da ƙimar juzu'i na 0.5 Nm.
• Yi amfani da madugu ɗaya kawai a cikin clampmadaidaicin wuri tsakanin tushen wutar lantarki na DC da shigar da wutar lantarki.
Takardu / Albarkatu
 |
MOXA V2403C Series Fanless x86 Kwamfutocin da aka haɗa don IIoT [pdf] Jagoran Shigarwa V2403C Series, Fanless x86 Kwamfutocin da aka haɗa don IIoT |
