GYMAX Makeup Table
Specifications
- Languages: DE, FR, EN, IT, ES
- Manufacturer: Songmics International GmbH
- Usage: Furniture
- Safety: Must be fixed to the wall with safety fitting provided
Assembly Steps
- Position and adjust parts according to the diagram.
- Tighten all screws gradually.
- Avoid using an electric drill for inserting screws.
- Place the dresser table in a ventilated area after assembly.
- Periodically check screw firmness and connected positions.
- Complete
Maintenance
Avoid contact with sharp objects or corrosive chemicals. Use coasters under liquids to prevent damage. Wipe spills immediately.
Guide of Manual
- Please read the assembly and safety instructions thoroughly, and use the product for the intended purpose. It is recommended to save the manual for future reference. When offering the product to a third party, please transfer the manuals simultaneously.
- The texts and diagrams are illustrated as detailed as possible. For clarity, not all the details of every possible variation and installation method canbe described. The texts and diagrams are given only as examples. If you require further information or face some problems please contact and consult the seller.
- It is strictly prohibited to copy, sell, modify, or translate this manual entirely or partially for any purpose without the express written permission of Songmics International GmbH. Songmics International GmbH reserves all rights.
Notes
- The product is intended for indoor use only, not for commercial use or outdoor use. The seller does not assume any responsibility or liability concerningany damage caused by incorrect assembly or improper use.
- To prevent tipping over, the furniture must be fixed to the wall with the safety fitting provided. Different wall materials require different types of fixing devices.
- If needed, please purchase the suitable fixing devices at a local retail store.
- Please check if the table is intact and if the components are complete before assembly. Do not place the edge of the unwrapped components on the floor to avoid fray or damage.
- It is recommended that two adults finish the assembly. To avoid damaging the product, please assemble the unit on a flat, clean, and soft floor.
- Follow the assembly steps shown in the diagram to position and adjust the parts, then gradually tighten all screws.
- We do not suggesusingsean an electric drill for inserting the screws. It may damage the product. Please use a hand screwdriver (not supplied).
- After the assembly, please place the dresser table in a ventilated area. The odor will disappear after two days.
- Periodically check the firmness of all the screws and connected positions.
- Never touch with sharp objects or corrosive chemicals, which may spoil the surface of the table.
- Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up the spills immediately and ensure that a mat or pad is placed under the paper if you are writing.
- Protect the article from sunlight exposure or rain, and do not put it in a humid place. It may accelerate the distortion, discoloration ,or fissures.
- Do not store heavy objects in the drawers. It may cause the article deformed or the paint to flake off. After the assembly, please do not shake or strike the table to avoid the components deformed or falling apart.
- Please seek assistance and take care when moving the furniture. Prohibit rudely dragging the table as careless handling may cause damage or injury.
- It is recommended that before moving to a new location the dresser table is completely disassembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings after the disassembly.
- For daily care, please use a soft cloth with neutral detergent if necessary, then dry the surface.
Warning
- If the piece of furniture tips over, itmay result in serious or fatal injury.
- Never use the dresser table if any part is missing or defective. Otherwise, there will be a risk of injury.
- The product is not intended for children. Children must be under adultsupervisionnn to use the product. Never allow children to climb or play around the product tooo prevent the product from tipping over and the mirror body is broken, and protect children from personal injury.
- During the assembly process, keep small objects out of the reach of children. It may be fatal if swallowed or inhaled.
- To avoid the anger of suffocation, keep the plastic bag away from babies and children.
Part List
FAQs
Q: Can I assemble the product alone?
A: It is recommended to assemble the product with two adults to prevent damage.
Q: How do I clean the product?
A: Clean with a damp cloth and mild detergent, then dry with a dry cloth.
Q: How do I fix the furniture to the wall?
A: Use the safety fitting provided and ensure it is securely attached to the wall based on the wall material.
Documents / Resources
 |
GYMAX Makeup Table [pdf] Instruction Manual Makeup Table, Makeup, Table |