G1™ Intermediate /Large Chew Kit
Instruction Manual
INT-L G1 Intermediate Large Chew Kit
- To install the Chew Kit on the door remove the screw, and take off the security latch cover. Discard the latch cover.
- Place grate over windows and align the screw holes. Install the thirteen screws to secure the grate in place
- Repeat for bottom of door.
- To install the Chew Kit on the windows remove three cap screws and washers that attach door frame to upper half of the kennel
- Using a 7/16″ wrench or ratchet, emote the screws and washers fastening the upper and lower halves of the kennel.
- Place the window grate on the interior of the kennel. Align the grate with the window openings. Mark the mounting holes.
Repeat for other window(s)
- Insert supplied screws into designed points, and install grates by twisting screws with applied manual force.
- Reassemble the upper and lower halves of the kennel. Finally, reinstall three cap screws and washers in the door frame.
1-844-GUNNERK
info@gunner.com
Documents / Resources
 |
GUNNER INT-L G1 Intermediate Large Chew Kit [pdf] Instruction Manual INT-L G1 Intermediate Large Chew Kit, INT-L, G1 Intermediate Large Chew Kit, Intermediate Large Chew Kit, Large Chew Kit, Chew Kit, Kit |