STANDARD REMOTE
Remote Control Functions
Operational Range – Line of Sight 75 ft.
Power ON
Power OFF Device for storage and Power Saver
Power ON
- Option 1- Hold down Front and Rear buttons for 2 seconds
– Work light turns ON - Option 2 -Plug your device in an AC Adapter using USB Cable
– Work light will single flash
– Double flash when charge is 100% - Light turns ON at Max brightness
Power OFF
- Hold down the Front and Rear buttons for 3 seconds
– Work light flashes 3 times – unit is OFF.
Power Saver
After 2 hrs. if the remote has not been used the device will go into sleep mode. To take devices out of sleep mode press any button on the device – this wakes up the device.
Pairing – Group 1 & 2 to a Standard Remote
Pro Tip:
Multiple devices can be Paired at the Same Time!
Pro Tip: a Paired Device
Powered OFF and then Powered ON will remains PAIRED to remote
Model #: RC-RF
Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by
Archangel Device, LLC. might cause harmful interference and void the FCC authorization to operate this product.
This product complies with the FCC RF radiation exposure limit set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.
Documents / Resources
 |
GUARDIAN ANGEL 2BCANRCRF Remote Control for LED Light with RF Transceiver [pdf] Instruction Manual 2BCAN-RC-RF, 2BCANRCRF, 2BCANRCRF Remote Control for LED Light with RF Transceiver, Remote Control for LED Light with RF Transceiver, Control for LED Light with RF Transceiver, LED Light with RF Transceiver, Light with RF Transceiver, RF Transceiver, Transceiver |