GROWATT AXE 5.0L Battery For SPF and WIT Inverters
Installation environment
Installation tools
Battery size
Check
- Check AXE 5.0L packing list
- Check accessories
- Installation Method / Compound Mode
- Standard floor installation A*M+B+C
- Floor installation into N columns A*M+B*N+C*N
- Note: “M” means the number of batteries, and “N” means the number of clusters.
Battery operation panel introduction
Floor installation with base
Installation Location Requirements
Note:
- The battery base is required while installing the battery system.
- The maximum quantity of stacking battery packs is 10, if it exceeds 10, please install them by way of multiple clusters in parallel.
- Please install indoors and ensure the level of the ground.
Installation Procedure
Note: When stacking, make sure that all batteries are aligned and lock the safety bolt.
Wiring
Single cluster wiring
Note:
- Please install the communication line first, then plug the unused RJ45 port and USB port with a dust cover, and finally install the power line.
- No cable connection is required between battery packs in a single battery cluster.
Wiring of Multi-clusters battery in parallel
Note:
- Supports up to 8 clusters in parallel.
- The power combiner box needs to be prepared by the user.
Key operation
Power button
| Situation | Touch | Definition |  |
|
System off |
Press(＜2S) | No reaction | |
| Press(≥2S) | Power on | ||
| System on | Press once | Shut down |
Note:
When multiple battery systems are used in parallel connection, you only need to press one key of any module to start the system. and also press one key to shut down the battery system
Service and contact
Shenzhen Growatt New Energy CO.,Ltd
4-13/F, Building A, Sinto-Germaa n, Euro pe, Industrial Park, Hangcheng Ave, Guxing Community, Xixiang Subdistrict, Baoan District, Shenzhen, China.
- 86 0755 2747 1942
- service@ginverter.com
- W:www.ginverter.com
FAQs
Q: How many clusters can be connected in parallel?
A: The product supports up to 8 clusters in parallel.
Q: What is the maximum stacking limit for battery packs?
A: The maximum stacking limit is 10 battery packs. For more than 10 packs, use multiple clusters in parallel.
Documents / Resources
 |
GROWATT AXE 5.0L Battery For SPF and WIT Inverters [pdf] Installation Guide AXE 5.0L Battery For SPF and WIT Inverters, AXE 5.0L, Battery For SPF and WIT Inverters, SPF and WIT Inverters, WIT Inverters, Inverters |