GROUND-ZERO-LOGO

GROUND ZERO GZREM 6-10 Remote Controller

GROUND-ZERO-GZREM-6-10-Remote-Controller-PRODUCT

Description

Ground Zero DSP Series

The environment in a vehicle interior usually offers unfavorable conditions and installation positions for loudspeakers that lead to errors in audio reproduction. By using DSP technology, however, most problems can be corrected. The advantages of DSP technology are also available as a built-in function in some amplifiers, for example integrated in a plug’n’play amplifier with ISO connection cable or as a universal 4channel amplifier with an 8-channel DSP and 4-channel preamplifier output.

Remote control for GZDSP 6- 10 SQ

  • Remote control with cable and LCD display
  • Compatible with GZDSP 6- 10 SQ
  • incl. subwoofer level control
  • Including connection cable, 500 cm
  • Total volume
  • Subwoofer volume
  • Memory selection
  • Source switching

Technical data

Version Remote control with cable and display
Housing Aluminum, black
LCD display Yellow

Functions

  1. Volume ControlGROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (1)
  2. Source ChangeGROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (2)
  3. Preset ChangeGROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (3)
  4. Subwoofer LeveGROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (4)

Connection

GROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (5)

It´s recommended to use the latest available software version for the GZDSP unit. Download the latest version from the web page.

Terms of Warranty

The limited warranty for this product is covered by GROUND ZERO´s regional distribution partners and their terms and conditions. For further information, contact your local retailer or distributor

Safety instruction

Safety instruction & Manufacturer´s declaration

  • Safety Instructions: Do not expose the device to extreme temperatures, fire, high humidity or direct contact with liquids. Do not use the device if it has been damaged or exposed to liquids. Keep the device, packaging and accessories away from children and pets to prevent accidents and suffocation.
  • Manufacturer‘s declaration: Herewith Ground Zero GmbH declares that this product complies with the directive 2014/30/EU (EMC) and further declares that this product is in conformity with the rules of the EU directives (including all applicable amendments) 2011/65/EU RoHS2 and 2001/95/EC General Product Safety directive. The full text of the Declaration of Conformity (EU) is available at the following internet address: www.ground-zero-audio.com. Electronic products contain valuable raw materials and must not be disposed of with normal household waste. At the end of its service life, please bring the device to your local recycling facility.

MORE INFORMATION

  • GROUND ZERO products are engineered in Germany.
  • GROUND ZERO – international sponsor of

Ground Zero GmbH

GROUND-ZERO-GZREM-6-10-Remote-Controller-FIG (6)

FAQs

  • Q: How do I change the input source on GZREM 6-10?
    • A: To change the input source, follow these steps:
      1. Press the Source Change button on the device.
      2. Use the controls to select the desired input source.
      3. Confirm the selection by pressing the OK button.
  • Q: How do I switch between presets on GZREM 6-10?
    • A: To switch between presets, follow these instructions:
      • Press the Preset Change button on the device.
      • Scroll through the available presets using the controls.
      • Select the desired preset by pressing OK.

Documents / Resources

GROUND ZERO GZREM 6-10 Remote Controller [pdf] Owner's Manual
GZREM 6-10, GZREM 6-10 Remote Controller, Remote Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *