Godox Cube-SL,Cube-SC Wireless Microphone
Foreword
Thank you for purchasing!
With the characteristics of ultra-compact and portable, long duration of use, 2.4GHz wireless transmission, Godox’s latest wireless microphone is quite suitable for live streaming, interview, short video recording, outdoor shooting, etc.
Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Main Features
- Globally universal 2.4GHz wireless transmission technology.
- The maximum wireless transmission distance up to 300m (sight distance).
- Clear and stable sound quality with denoise function. Ultra-compact size, plug and play.
- Built-in lithium battery in transmitter provides 10h of long working time.
- Shooting/Recording through remote control after successfully paired.
Warning
- This product is high-precision instrument, please avoid falling, collision or pounding.
- Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
- Always keep this product dry. Do not use in rain or damp conditions.
- Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
- Keep out of reach of children.
- Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
- Do not leave or store the product if the ambient temperature reads over 50.
- Please read carefully and follow the warnings or instructions provided by the manufacturer.
Structure of Product
Transmitter
- Power Switch/Denoise/Pairing Button
- Built-in Microphone
- Indicator
- Magnetic Charging Points
Receiver
Cube-SL RX
- Pairing/Denoise Button
- TX1 Indicator
- TX2 Indicator
- USB-C Port
- Lightning Plug
Cube-SC RX
- Pairing/Denoise Button
- TX1 Indicator
- TX2 Indicator
- USB-C Port
- USB-C Plug
Charging Case
What’s Inside
Model | Kit Set | Package List |
Cube-SL Cube-SC | Kit1 | Transmitter ×1, Receiver ×1, Magnetic Charging Cable ×1, Furry Windscreen
×1, Storage Box ×1, Magnetic Clip ×1, Magnet ×2, Portable Rope ×1, Quick Start Guide ×1,Instruction Manual ×1 |
Cube-SL Cube-SC | Kit2 | Transmitter ×2, Receiver ×1, Charging Case ×1, USB-A to USB-C Data Cable
×1, Furry Windscreen ×2, Storage Box ×1,Magnetic Clip ×2, Magnet ×4, Portable Rope ×2, Quick Start Guide ×1, Pin ×1, Instruction Manual ×1 |
Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
Instructions for Use
- Long press for 2s to turn on/off Double press within 30s after power on to pair
- Short press once to turn on/off denoise function
- In paired status, double press to take a picture or record when the smartphone’s camera is turned on
- Insert into smartphone via Lightning / USB-C plug, it will boot up automatically
- Double press to pair
- Short press once to turn on/off denoise function
Note
- Take out the transmitter from the charging case, it will boot up automatically, while put it into the charging case, it will be turned off.
- The transmitter and receiver will exit pairing status after 10s if unpaired. The transmitter will turn off automatically if it has not been paired for more than 5min and no other operations. If two transmitters are paired with the receiver but one of which is turned off later, then its corresponding TX1/TX2 indicator will be off in 30s. In the power-off state, press and hold the buttons of the transmitter and receiver to clear the pairing information, and the indicators will flash white rapidly for 3s.
- If the smartphone is not in the camera interface, double press the transmitter button, the volume pop-up interface will be triggered, which is normal. If the smartphone has turned on an app function, the shooting/recording function cannot be triggered.
Indicator Status | Meaning |
Indicator of transmitter flashes green every 0.5s | Unpaired after powered on |
Both indicators of receiver flash green every 0.5s | Unpaired after powered on |
Indicator of transmitter flashes green rapidly every 0.25s | Pairing status |
Both indicators of receiver flash green rapidly every 0.25s | Pairing status |
Indicator of transmitter is constant on green | This transmitter is successfully paired |
TX1 indicator of receiver is constant on green, TX2 indicator of receiver is off after 10s of rapid green flash | One transmitter and one receiver are paired |
Both indicators of receiver are constant on green | Two transmitters and one receiver are paired |
Indicator of transmitter/receiver is constant on orange | Denoise function is on |
Charging
Charging through Charging Cable
The transmitter can be charged after connecting to power source through magnetic charging cable, while the receiver supports to use and charge the smartphone through USB-A to USB-C cable at the same time.
Indicator Status | Meaning |
Indicator of transmitter flashes blue | Charging the transmitter |
Indicator of transmitter is constant on blue |
Transmitter is fully charged |
Indicator of transmitter flashes red every 0.5s |
Battery level of transmitter is below 10% |
TX1 indicator of receiver is constant on red, TX2 indicator of receiver displays normally |
Battery level of transmitter TX2 is normal, while battery level of transmitter TX1 is below 10% |
TX1 indicator of receiver displays normally, TX2 indicator of receiver is constant on red |
Battery level of transmitter TX1 is normal, while battery level of transmitter TX2 is below 10% |
Both indicators of receiver are constant on red | Battery levels of transmitter TX1 and TX2 are below 10% |
Charging through Charging Case
Put the devices into the charging case and open the lid: The case will first detect whether the transmitters are correctly inserted into the corresponding slots, if the pins inside touched the charging points of the transmitters, it will detect whether the transmitters are fully charged, if not, it will start charging until the transmitters are fully charged. The indicators on the charging case will light up if the lid is open, and turn off in 5s after the lid is closed.
Put the devices into the charging case and close the lid: The transmitters will shut down and be charged until they are fully charged.
Charging the case itself: The indicators on the charging case will flash incrementally, and be constant on after the charging case is fully charged.
Indicator Status | Meaning |
Indicators on the charging case flash white | Charging the case |
Indicators on the charging case are constant on white | The case is fully charged |
Apple FindMy
This function only applies to kit2 with charging case.
At first use, open the charging case, poke for a while the hole behind the case gently with the attached pin, wait for the alert tone.
If you need to return the product due to quality or objective reasons, make sure to remove it from your Apple devices first (refer to the instructions below), and reset the Apple Findmy function with pin (refer to the instructions below) to clear the link information.
Note:
- Poke for 3s to turn on or off the function, the case will beep accordingly.
- Confirm status: double poke the hole, it will beep in function on status, but no alert tone in function off status.
- Function reset: power on state, poke twice the hole, the case will beep, then poke for 4s until it beeps again, the factory reset is completed.
- Open “FindMy” app in your smartphone, select “Device” and click “+”, then “Add Other Item”.
- Search for “Cube-SL” and select “Connect”.
- Then “Name Item” and “Choose an Emoji”.
- Click “Agree” to link this product to your Apple ID.
APP Downloading
Scan the QR code to download the Godox Mic app, it can control the use of this product after connection.
Instructions for Installation
Absorb the transmitter to the collar with magnet, or clip it to the collar with magnetic back clip.
Insert the receiver into smartphone via Lightning/USB-C plug, then it’s ready to use. Or connect the receiver to power source with USB-A to USB-C cable and insert into smartphone, then it can charge the smartphone and be used at the same time.
Technical Data
Charging Environment Temperature |
0-45℃ | / | / | 0-45℃ |
Dimension ≈ |
0.96″ x0.98″x 0.49″ |
1.57″x 1.04″x 0.35″ |
1.57″x 1.04″x 0.35″ |
3.46″x 1.22″x 1.40″ |
Net Weight ≈ | 7g | 5g | 5g | 49g |
Specifications and data may subject to changes without notice.
Maintenance
- Avoid falling. Strong collision or vibration may malfunction the device.
- Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.
- Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand.
- Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.
- Specifications and data may subject to changes without notice.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Marking Information
Warning
- Operating Frequency: 2402MHz – 2480MHz
- Cube-S TX Maximum EIRP Power: 5dBm
- Cube-SL RX Maximum EIRP Power: 5dBm
- Cube-SC RX Maximum EIRP Power: 5dBm
- Cube-S Charging Case Maximum EIRP Power: 5dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity
The device complies with RF specifications when the device used at 0mm from your body.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information | Model | Product Code Number |
Customer Information |
Name | Contact Number |
Address | ||
Seller Information |
Name | |
Contact Number | ||
Address | ||
Date of Sale | ||
Note |
Note: This form shall be sealed by the seller.
Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: ① The product or accessory has expired its warranty period; ② Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; ③ Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; ④ The original identifying information of product or accessory is modified, alternated, or removed; ⑤ No valid
warranty card; ⑥ Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; ⑦ Breakage or damage caused by force majeure or accident; ⑧ Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type | Name | Maintenance Period(month) | Warranty Service Type |
Parts |
Product Main Body | 12 | Customer sends the product to designated site |
Battery | 3 | Customer sends the product to designated site | |
Electrical parts e.g.battery charger, etc. | 3 | Customer sends the product to designated site | |
Other Items |
Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap,
Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. |
No | Without warranty |
Godox After-sale Service Call 0755-29609320-8062
GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com
Made in China | 705-CUBE00-00
Documents / Resources
![]() |
Godox Cube-SL,Cube-SC Wireless Microphone [pdf] Instruction Manual Cube-SL, Cube-SC, Cube-SL Wireless Microphone, Cube-SC Wireless Microphone, Wireless Microphone, Microphone |