Godox CUBE-C Wireless Microphone System
INSTRUCTION MANUAL
MODEL: Cube-C
Foreword
Thank you for purchasing!
Godox is proud to introduce a new wireless microphone system. With the characteristics of compact and portable, plug and play, 2.4GHz wireless transmission, as well as compatibility with various smartphones and cameras, it’s quite suitable for live streaming, interview, short video recording, outdoor shooting, etc.
Please read this manual carefully before using to make sure the correct operation and exert the optimum function.
Main Features
- The maximum wireless transmission distance up to 300m (sight distance).
- Clear and stable sound quality with denoise function
- Compact and portable, plug and play.
- Built-in lithium battery in transmitter provides 10 hours of working time.
- Switchable mono, stereo and safety track modes in receiver.
- Receiver supports computer UAC function, use and charge at the same time.
- Compatible with various smartphones and cameras.
Warning
- This product is high-precision instrument, please avoid falling, collision or pounding.
- Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
- The product contains strong magnetism, please keep it away from magnetic cards, implantable medical devices (such as pacemakers), hard disks, RAM chips and other devices that are susceptible to interference.
- Do not store the battery for a long period of time after it has been completely discharged to avoid over-discharging the battery and rendering it unusable.
- Always keep this product dry. Do not use in rain or damp conditions.
- Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty. Do not leave or store the product if the ambient temperature reads over 50℃ .
- Keep out of reach of children.
- Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
- Please read carefully and follow the warnings or instructions provided by the manufacturer.
- Consumers who use a power adapter for charging should purchase a CCC-certifi ed power adapter that meets the requirements of the standard.
Using Instructions
Charging
The transmitter can be charged after putting into the charging case.
Receiver Cube-C RX
Power Switch
Long press the power switch button < > for 2s to turn on or off the receiver.
Flash green —- Unpaired after powered on
Note: The receiver will be turned off if it stays unpaired in 5min after powered on.
Pairing
Quickly short press twice the pairing button < 
> to pair it with the transmitter.
Denoise
Short press the denoise button < > to turn on or off the denoise function.
Charging
The receiver can be charged after connecting to power source through the USB-C charging cable or putting into the attached charging case.
Mode Switch
Long press the mode/volume – button < 
> for 2s can switch to stereo / mono track mode.
Long press the safety/volume + button < 
> for 2s can turn on or off the safety mode.
Note: The safety mode is mono track by default, and the right channel will record the audio with -6dB gain.
Note: The stereo and safety modes are only available when connecting the receiver with a camera by 3.5mm TRS cable.
Output Volume Adjustment
Receiver Cube-SC RX
Note: Cube-SC RX is only included in Combo kit1 and Combo Kit2.
Short press the safety/volume + button < > or mode/volume – button < > to enter volume adjustment status, then short press the volume + button or volume – button in 3s can adjust the output volume in 3 levels.
Receiver Cube-SC RX
Note: Cube-SC RX is only included in Combo kit1 and Combo Kit2.
Pairing
Quickly short press twice the pairing button < > to pair it with the transmitter.
Denoise
Short press the denoise button < > to turn on or off the denoise function.
Constant on orange —- Denoise function is on
Battery Level
Flash red —- Battery level of TX1 or TX2 transmitter is low
Charging Case
Charge the Transmitter and Receiver
Insert the transmitter and receiver into the charging case in the correct direction can charge them.
Indicators on the transmitter and receiver flash blue means that they are being charged, constant on blue means that they are fully charged.
Note: Remove the sticker on the bottom of the transmitter/receiver for fi rst time use.
Charge the Case Itself
The charging case can be charged by connecting to the power adapter, the indicators on it will flash incrementally
<….. > Flash white —- Charging
< ….. > Constant on white —- Fully charged, then turn off in 10min
Note: Recharge every 3 months or so to keep the battery alive. Sitting idle for a long time may affect its performance or even cause permanent damage to the battery.
Transmitter Installation
Mount the Receiver onto Cameras
Mount the Receiver onto Smartphones
Smartphones with USB-C port
Mount the Receiver Cube-SL RX and Cube-SC RX onto Smartphones
Connect the receivers Cube-SL RX and Cube-SC RX to power source with USB-A to USB-C cable and insert into smartphones, then they can charge the smartphone and be used at the same time.
Note: Cube-SL RX is sold separately.
APP Downloading
Scan the QR code to download the Godox Mic app, it can control the use of this product after connection
Technical Data
Warning
Operating Frequency: 2402MHz – 2480MHz
Cube-S TX Maximum EIRP Power:-4.25dBm
Cube-SC RX Maximum EIRP Power:4.05 dBm
Cube-C RX Maximum EIRP Power: 5dBm
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
For more information of DoC, Please click this web link:
https://www.godox.com/eu-declaration-of-conformity
The device complies with RF specifi cations when the device used at 0mm from your body
Marking Information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fi ll in the following form in coordination with the seller and safe-keep it. Thank you!
Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached,etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the fi rst time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confi rmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: ① The product or accessory has expired its warranty period; ② Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; ③ Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; ④ The original identifying information of product or accessory is modifi ed, alternated, or removed; ⑤ No valid warranty card; ⑥ Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; ⑦ Breakage or damage caused by force majeure or accident; ⑧ Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423
E-mail: godox@godox.com
www.godox.com
Made in China | 705-CUBEC2-01
Specifications:
- Frequency Response: 20Hz-20KHz
- Signal-to-Noise Ratio: 115dB
- Dynamic Range: 70dB
- Transmitter Power Supply: 5V 90mA
- Receiver Power Supply: 5V 200mA
- Charging Case Power Supply: 5V 1.2A
- Battery Capacity (Transmitter): 3.87V, 97mAh, 0.376Wh
- Battery Capacity (Receiver): 3.8V, 200mAh, 0.76Wh
- Battery Capacity (Charging Case): 3.8V, 2300mAh, 8.74Wh
- Operating Temperature: -10~50°C
- Storage Temperature: 0 ~45°C
QUICK Product Usage Instructions:
Cube-S TX:
Insert the USB-C cable into the transmitter to charge for at least 2 seconds. The LED indicator will show a solid red light while charging and turn off when fully charged.
Cube-C RX:
Connect the TRS cable to the Cube-C RX. Press the power button for 2 seconds to turn on the receiver. Adjust volume using the + and – buttons.
Cube-SC RX:
In Combo Kit1/Kit2, connect the USB-C cable to the Cube-SC RX.
For Cube-SC RX standalone, connect it to TX1/TX2 using the USB-C cable.
Charging Case:
Charge the case using the provided USB Type-C cable. The case supports fast charging and can charge the devices multiple times before needing a recharge.
FAQ:
1. How do I pair the transmitter and receiver?
To pair the devices, ensure both are powered on and within range. Press and hold the pairing button on both devices until they connect.
2. Can I use the microphone system with smartphones and cameras?
Yes, the system is compatible with various smartphones and cameras for live streaming, interviews, video recording, and outdoor shooting.
3. How do I know when the batteries are low?
The LED indicators on the devices will flash or change color when the batteries are running low. It’s recommended to charge them promptly.
Documents / Resources
 |
Godox CUBE-C Wireless Microphone System [pdf] Instruction Manual CUBE-C Wireless Microphone System, Wireless Microphone System, Microphone System, System |
 |
Godox Cube-C Wireless Microphone System [pdf] Instruction Manual Cube-C, Cube-C Wireless Microphone System, Wireless Microphone System, Microphone System, System |
 |
Godox CUBE-C Wireless Microphone System [pdf] Instruction Manual CUBE-C Wireless Microphone System, CUBE-C, Wireless Microphone System, Microphone System |
