Voyager Software
User Guide
Voyager Software
How to set up GlucoRx Voyager for Windows
- Navigate to https://www.glucorx.co.uk/our-services/software/ and select the Voyager Download
- The download will start, progress will display in the bottom left corner of your browser.
- Double left click the Gluco_Setup zip file.
- Double left click the Gluco_Setup file.
- To start the installation, double left click the “Setup” file.
- PLEASE NOTE
If you see this pop up, click “More Info” then click “Run anyway
- If this message shows, select “ Ye s ”.
- Tick the “I agree to the License terms and conditions”. Select “Install”.
How to import readings from USB Meters to Voyager for Windows
- Navigate to https://www.glucorx.co.uk/ourservices/software/ and select the Voyager Download button.
- To login, Input your email address and password.
- The user is prompted to input their Low and high blood glucose limits. This is personal to each person. If you are unsure what your limits are you should speak with your healthcare professional. (This is only required on the user’s first login)
- Plug your meter into the computer using a USB cable.
- When “USB or PC” is displayed on the screen, select the meter name from the devices dropdown and select “Connect”.
If this is the first time you have connected your meter it may fail to connect. It is recommended you restart your computer if a failure to connect occurs. - New readings will automatically be imported.
- The GlucoRx Voyager portal will open in a web browser.
- To log into the portal without importing any results, open GlucoRx.exe and click the “visit Portal” button. You can also login from any web browser by going to www.grxvoyager.com
Documents / Resources
 |
GlucoRx Voyager Software [pdf] User Guide Voyager Software, Voyager, Software |