GLMX25A01 4G Wireless Data Terminal
UniCord Plus Product Information
Specifications:
- Type-C connector
- Power Button
- Status LED Indicator
- Charge & Battery LED Indicator
Product Overview:
The UniCord Plus features a Type-C connector for easy
compatibility and a convenient power button for operation. The
device is equipped with status LED indicators for monitoring
charging status and battery level.
Product Usage Instructions:
LED Indicator Status:
The LED indicators on the UniCord Plus provide important
information. Here is a breakdown of the LED indicator status:
- Left LED Indicator (Charge & Battery LED
Indicator): Red slow flash when charging, green slow flash
when the battery is above 30%, green steady on when fully charged,
and off when not charging. - Right LED Indicator (Status LED Indicator):
Red slow flash during networking or startup in progress, blue slow
flash for exceptions, green steady on for successful networking,
and off when not in use.
Charging the Device:
To charge the UniCord Plus, simply connect the Type-C connector
to a power source and press the power button. The left LED
indicator will show the charging status. Once fully charged, the
LED indicators will display the appropriate signals as mentioned
above.
Networking and Usage:
When using the device for networking or other functions, pay
attention to the right LED indicator for status updates. The
different colors and flashing patterns indicate various states of
operation.
FAQ (Frequently Asked Questions):
Q: How do I know when the UniCord Plus is fully charged?
A: The left LED indicator will show a steady green light when
the device is fully charged.
Q: What does a red slow flash on the right LED indicator
mean?
A: The red slow flash indicates that networking or startup
processes are in progress.
UniCord Plus User Manual
For more information, please download the complete guide on https://www.glocalme.com/support/user-manual. This manual is for reference only, the actual
product shall prevail. The information is subject to change without notice Copyright © 2025 uCloudlink All Rights Reserved
1. Product Overview
1. Type-C connector 3. Power Button
2. Type-C connector
4. Status LED Indicator
5.Charge & Battery LED Indicator
LED Indicator status LED Indicator Type
Left LED Indicator Charge & Battery LED Indicator
Right LED Indicator Status LED Indicator
Mode
Charging
Without charging Networking Success Exception/Startup in
Progress
Status
Red slow Flash Green slow Flash
Green On Off
Red slow Flash Blue slow Flash
Remarks
<30% >=30%;<100% Fully charged >=30% <30%
Blue fast Flash
2. Method of Application
Description Manual On/Off Auto Power On
Function Introduction Operation
Press and hold the “Power Button” for 3 seconds to turn on the power. Type-C connector plugged into charger
Remark
Auto shutdown
Auto shutdown is judged based on power level: Below 30% to APP pop low battery warning Below 20% to continue to push pop low battery warning Below 10% continues to push a pop low power warning and reports location information.
Dynamically adjusted according to the usage scenarios
Enable Emergency Short press 3 times consecutively to activate
WiFi
Disable Emergency WiFi
Setting via APP
How To Use GlocalMe Service
1.Scan the device, the package or the QR code in the picture below with your cell phone to download the GlocalMe APP
2. Register GlocalMe account number, Create a GlocalMe Account (In App) · ClickLogin-Register · Follow the steps to register an account(You can register using an email or mobile number)
3. Link Device with GlocalMe App; · Open GlocalMe App to log in to your account and clickMy Device-Link Device · Scan the device QR-code
4. Turn on the device and wait for the “Status LED Indicator” to stay on. · Connect USB power using any Type-C connector
· Short press 3 times consecutively to activate
5.You can view the location, use and manage the device through the GlocalMe APP.
Notes: 1.If the device cannot function properly on the first startup, please restart the device and wait for the status indicator light to remain steady. 2.To activate the emergency WiFi: After powering on the device, press the power button three times in quick succession to enable the emergency WiFi. Special Reminder: It is recommended to use the device in an ambient temperature between 0°C and +35°C. Avoid using the device in excessively high or low-temperature environments, prolonged exposure to direct sunlight, sealing or wrapping the device, or placing it in humid environments. Power On Methods
Method 1: Connect the USB power supply to either Type-C port.
Method 2: Connect either Type-C port to an electronic device that supports reverse charging, such as a smartphone, tablet, or laptop
. Method 3: Press and hold the power button for 3 seconds.
3. Charging Instructions
The USB-C port can charge various devices, including cameras, mobile phones, tablets, game consoles, headphones, and power banks.
Charger Interface Output Specifications:
Charger Interface Rated Voltage
USB-C
20V
Max Power
60W
Supported charging protocolsPD3.0,PD2.0,QC3.0,BC1.2
4. Technical Specification
Model:GLMX25A01 Box content: Device, User manual, Type-C to USB-A Adapter*1 Size 68*66*22.5mm Power input:20V Maximum Power 60W FDD-LTEB1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/66 TDD-LTEB38/41 WiFi 802.11 b/g/n2.4GHz GPSSupport Battery capacity410mAhTypical Capacity/3.7V Emergency WiFi Maximum wireless connections 2
5. Q&A
1. QWhat if the Status LED Indicator is flashing? A: If it flashes for more than 5 minutes, connect the APP to check the status and follow
the instructions. 2. QWhat if the Status LED indicator is not on?
A: Check if the USB power connection is secure and if it is properly powered. 3. Q:How to activate the emergency WiFi?
A: After turning on the device, continuously press the power button three times to activate the emergency WiFi. 4. QHow to force restart the device?
A: Press and hold the power button for 15 seconds to force restart the device. 5. Why can’t the device charge when using an external Type-C to USB-A adapter?
A: Please ensure that you follow the correct device connection sequence. First, insert the external Type-C to USB-A adapter into any Type-C port on the UniCord Plus. Then, insert the USB-A adapter into the charging head. Finally, connect the device that needs to be charged.
For more information, please download the complete guide on https://www.glocalme.com/support/user-manual. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice
6. Note
Listed wireless data transfer rates are the theoretoical maximum. The actual data transfer rate may vary depending on the network environment and carrier’s coverage. CAUTION
A battery replaced by a battery of incorrect type, disposal by throwing into fire or a hot oven, or mechanically crushing or cutting can result in an explosion; Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of flammable liquid or gas; A battery subject to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas. Warning Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue. During testing, the device are set to their highest transmission levels in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. EU Regulatory conformance The device complies with RF specifications and when used with an accessory that contains no metal and that positions the device a minimum of 0.5 cm from the body. The SAR limit adopted is 2.0W/kg averaged over 10 grams of tissue. The highest SAR value reported for the device when properly worn on the body complies with the limit. Hereby, HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED declares that this device is in compliance with the essential requirements and other relevant provisions of Directive (RED) 2014/53/EU. FCC Regulatory conformance For body worn operation, the device complies with FCC RF exposure guidelines and when used with an accessory that contains no metal. The SAR limit adopted by the FCC is 1.6W/kg averaged over 1 gram of tissue. The highest SAR value reported for the device when properly worn on the body complies with the limit. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause. Undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is suggested to try to correct the interference by the following measures: –Reorient or relocate the receiving antenna. –Increase the distance between the equipment and receiver. –Connect the equipment to an outlet on a different circuit to the receiver.
–Consult the manufacturer or an experienced radio/TV technician for help. nformation on the disposal and recycling of the device
This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE. Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present. Do not disassemble or modify, do not short-circuit, do not dispose in fire, do not expose to high temperature, be disable after soaking. Do not squeeze or bump the battery. Do not continue to use if serious.
This product and related system are protected by one or more of uCloudlink’s patents, details please refer to
https://www.ucloudlink.com/patents Copyright © 2025 uCloudlink All Rights Reserved
UCLOUDLINKSINGAPOREPTE.LTD. Mail: service@ucloudlink.com Live chat: GlocalMe website / GlocalMe mobile app Facebook: GlocalMe Instagram: @GlocalMeMoments Twitter: @GlocalMeMoments YouTube: GlocalMe Address: 80 ROBINSON ROAD #02-00 SINGAPORE(068898)
Documents / Resources
 |
GlocalMe GLMX25A01 4G Wireless Data Terminal [pdf] User Manual GLMX25A01, GLMX25A01 4G Wireless Data Terminal, 4G Wireless Data Terminal, Wireless Data Terminal, Data Terminal |