Global Synthetics GS_015 Pro Grid PP Geo Composite Geogrid Instruction Manual
Biaxial soil reinforcement, stabilization & separation recomposite
Product Information
ProGrid® PP Reinforcement Geocomposite is formed by punching holes and stretching a stiff polypropylene sheet to form a geogrid with uniform openings which then has a polyester (PET) nonwoven geotextile heat bonded to one side.
ProGrid® PP Reinforcement Geocomposite provide stiff, high modulus reinforcement with the added benefit of separation and filtration. These features combine to allow the construction of roads and other amenities over weak, low bearing subgrades.
Applications
- Base, sub-base stabilisation and reinforcement
- Subgrade / soil stabilisation and reinforcement
- Raft reinforcement construction
- Road, railway and airport pavements
- Suitable for placement directly on subgrade due to separation benefits of the attached geotextile
ProGrid® Polypropylene (PP) Geocomposite
Benefits and Features
- Reinforcement/stabilisation, separation, filtration and drainage combined. Making installation easier and faster in a single operation to provide significant cost and time savings
- Increases lateral confinement of unbound & modified gravel material layers
- Improves soil/subgrade bearing capacity
- Helps control expansive soil/subgrade movements and associated longitudinal cracks in sealed road pavements
- Robust against installation damage, and chemical and biological attack
Product Data Sheet
Product Grade
| Geogrid Properties | Test Method | Units | 20/20 | 30/30 | 40/40 |
| Ultimate Tensile Strength (MD/CD) | ASTM D4595 orEN ISO 10319 / ASTM D6637 | kN/m | 20/20 | 30/30 | 40/40 |
| Strain @ Ultimate Strength (MD/CD) | ASTM D4595 or %EN ISO 10319 / ASTM D6637 | 13/13 | 13/13 | 13/13 | |
| Tensile Strength @ 2% Strain (MD/CD) | ASTM D4595 orEN ISO 10319 / ASTM D6637 | kN/m | 7/7 | 11/11 | 14/14 |
| Tensile Strength @ 5% Strain (MD/CD) | ASTM D4595 orEN ISO 10319 / ASTM D6637 | kN/m | 14/14 | 22/22 | 28/28 |
| Junction Efficiency (MD/CD) | ASTM D7737/D7737M-15 % | 100/100 | 100/100 | 100/100 | |
| Aperture Size (MD/CD) | mm | 38/43 | 34/41 | 37/43 | |
| Aperture Stability | ASTM D 7864 | N-m/degree | 0.50 | 0.75 | 0.98 |
| Installation Damage Resistance | ASTM D5818 or ISO 10722 % | 98 | 98 | 98 | |
| Radial Stiffness @ 0.5% strain | ASTM D4595 orEN ISO 10319 / ASTM D6637 | kN/m | >350 | >550 | N/A |
| pH Resistance | EN 14030 | – | 4 to 9 | 4 to 9 | 4 to 9 |
| Geotextile Properties | Test Method | Units | Geofirma® AS150A (Standard) | Geofirma® AS270C (Optional) |
| Grab Strength | – | N | > 780 | > 1330 |
| CBR Burst Strength | AS3706.4 | kN | > 1.8 | > 3.5 |
| Trapezoidal Tear Strength | AS 3706.3 | N | > 310 | > 480 |
| G-Rating | Austroads | – | > 1750 | > 2825 |
| Characteristic Opening Size | AS 3706.7 | μm | ≤ 110 | ≤ 100 |
| Permeability | AS 3706.9 | l/m2/s | ≥ 210 | ≥ 150 |
| Permittivity | AS 3706.9 | s-1 | ≥ 2.1 | ≥ 1.5 |
| Dimensions | Units | 20/20 | 30/30 | 40/40 | |
| Roll width | – | m | 3.9/5.9 | 3.9/5.9 | 3.9/5.9 |
| Roll length | – | m | 50 | 50 | 50 |
About Us
Leaders in Geosynthetics
Global Synthetics is a 100% Australian-owned company, proud to offer a complete range of high-quality geosynthethic products backed by over 200 years of combined staff experience in the industry We have supplied products to some of the largest recent infrastructure works in Australia. Global Synthetics provides major benefits to any geotechnical engineering project with the right products and our technical expertise.
Global Synthetics products are used in the following applications:
- Pavement Stabilisation
- Ground Improvement
- Soil Reinforcement and Retaining Structures
- Water Management
- Drainage Systems & Hydraulic Works
- Landfills
- Coastal Erosion Structures
Get in Touch
AUSTRALIA
Website
globalsynthetics.com.au
Email
info@globalsynthetics.com.au
New South Wales
(02) 9725 4321
North Qld
(04) 5921 1692
Victoria/Tasmania
(03) 9791 1772
Queensland
(07) 3865 7000
South Australia
(08) 8384 8894
Western Australia
(08) 9459 4300
NEW ZEALAND
Website
globalsynthetics.co.nz
Email
info@globalsynthetics.co.nz
Auckland
0800 510 120
Christchurch
0800 510 120
All information provided in this publication is correct to the best knowledge of the company and is given out in good faith. The information presented herein is intended only as a general guide to the use of such products and no liability is accepted by Global Synthetics Pty Ltd for any loss or damage however arising, which results either directly or indirectly from the use of such information.
Global Synthetics Pty Ltd have a policy of continuous development so information and product specifications may change without notice.
February 2025
Documents / Resources
 |
Global Synthetics GS_015 Pro Grid PP Geo Composite Geogrid [pdf] Instruction Manual GS_015, GS_015 Pro Grid PP Geo Composite Geogrid, GS_015, Pro Grid PP Geo Composite Geogrid, Grid PP Geo Composite Geogrid, Geo Composite Geogrid, Composite Geogrid, Geogrid |
