User Manual
—- S102&C200-F-TY —-
Product Introduction
Technical parameter
material | ABS&&zinc alloy | Fingerprint capacity | 50 pcs | App | TuyaSmart/Sm art Life |
Operating temperature | -20º ∼ 55º | Recognition time | ≤0.5s | USB key | Optional |
Working humidity | 10% ~ 85% RH | Static current | ≤45uA | Battery type | 3 AAA (No. 7) alkaline batteries |
Number of users | 10 to 50 pcs are optional | Dynamic current | ≤120m A | Emergency power supply | Type-c |
Operation instruction
- No fingerprint is added at the factory, and any fingerprint can be unlocked.
- Please pay attention to the light prompts of the smart lock. (A green indicator light means correct, and a red indicator light means wrong).
I. Initialize
Insert three AAA-sized alkaline batteries into the battery compartment on the rear panel. Subsequently, plug the connector of the rear panel into the socket of the front panel. Press and hold the Initialize button until the green LED remains steadily lit, indicating the lock has been initialized. After initialization, the device will be unpaired, and all programmed fingerprint templates will be erased.
(The lock is pre-initialized at the factory.)
II. Networking of devices
>Tip: This product is a Bluetooth smart cabinet lock. The App administrator is the final administrator of the lock. The owner of the Bluetooth smart cabinet lock must download the Smart Life App or the Tuya App for binding.
- Please download and install the Smart Life App or Tuya Smart from the Apple Store or mobile app market.
- After the installation is complete, follow the prompts to register and log in.
- Users can also scan the following QR code to download and install the application:
![]() |
![]() |
https://smartapp.smart321.com/smartlife | https://smartapp.tuya.com/tuyasmart |
III. Add Bluetooth lock
>To add a device to the app, touch the fingerprint to wake up the device before adding.
IV. Fingerprint Registration
Place your finger in the fingerprint area and read the same finger repeatedly (different angles) to complete the registration.
Special feature description
Illegal Fingerprint Alarm:
When a wrong fingerprint is detected, the red light will turn on.
Low voltage alarm:
When the red indicator light flashes continuously for 3 seconds during unlocking, it indicates that the smart lock is in a low-voltage state. Please replace the battery in a timely manner.
Emergency unlocking:
When the smart lock cannot be unlocked due to low power, you can use a 5V power bank to unlock the smart lock through the Type-C interface.
▶ Before installation, test whether the smart lock works properly
▶ Please scan the QR code on the right to watch the installation video
https://qr61.cn/o0un0S/qLTLnN9
https://qr61.cn/o0un0S/qHtkNjZ
Documents / Resources
![]() |
Global Sources S102 Bluetooth Smart Cabinet Lock [pdf] User Manual S102-F, C200-F-TY, S102 Bluetooth Smart Cabinet Lock, S102, Bluetooth Smart Cabinet Lock, Smart Cabinet Lock, Cabinet Lock |