Generic T9 Android Smart Circle Projector User Manual

Product Overview

Package Content

Usage

Bluetooth remote pairing (default pre-paired by factory):Press the left and right buttons at the same time, let go when the indicator light flashes. Hold the remote close to the turned on Projector. The indicator light flashes several times rapidly when pairing is successful.

How to surf the internet

Go to ‘setting’ > ‘Network’ and select ‘WLAN’. Select a suitable Wi-Fi network and enter the password (refresh the page if your Wi-Fi network is not listed).

How to connect a Bluetooth accessory/speaker:Go to ‘setting’ > ‘Bluetooth’ > ‘add accessory’ and select the bluetooth device that is already in pairing mode.

How to use the projector as a Bluetooth speaker:Go to ‘APPS’ > ‘My apps’ and select ‘BT Speaker’. On your (source/mobile) device, search and add a bluetooth device called Bluetooth speaker (Q5_XXXX).

How to mirror/sync your Android/Apple phone screen:Note: There are numerous ways to mirror your phone screen, depending on the application installed on the projector and the type of phone operating system. In the following explanation, we assume that the “mircast” and “airscreen” applications are pre-installed on the projector and that the phone and the projector are connected to the same Wi-Fi network.

Mirror/sync with Android:On the projector go to ‘APPS’ and select ‘airscreen’. On your iPhone select the screen mirroring.

Mirror/sync with iPhone:On the projector go to ‘APPS’ and select ‘airscreen’. On your iPhone select the screen mirroring icon.

How to Screen cast with Android/iPhone (Miracast):Make sure the phone and the projector is connected to the same Wi-Fi network. On the projector go to ‘APPS’ and select ‘Miracast’. On your mobile device, select the screencast icon to find your projector name. The icon can look as follows depening on the software

Product Specifications

Correct disposal of the products: Within the European Union, this symbol indicates that the products must not be disposed of in household waste. Devices contain valuable recyclable materials that should be recycled for reuse; uncontrolled waste disposal may cause harm to the environment and human health. Please dispose of old products via suitable collection systems or send the unit to the office where you purchased it for proper recycling.

Distance and screen size

Warnings and Safety Precautions

• Be sure to use the supplied power adapter of the device. Improper use of different power adapters will cause serious damage to the device;
• If you do not use the device for a long time, please make sure to turn off the power switch;
• Please avoid particles entering or blocking the air outlet at the fan outlet;
• When the device is operating, please do not turn off the power directly;
• When connecting an external device with a large power consumption, please confirm whether the power supply can support it;
• Do not open the device;
• Do not look directly into the lens;
• Do not expose this unit to water or moisture;
• Do not install in hot and humid places;
• Do not install in poorly ventilated places;
• Do not install in dusty and smoky places;
• Do not block ventilation holes (inlet or outlet);
• Position the device at least 30cm away from any obstacle, ceiling, and wall;
• After this product is scrapped, it should be treated as waste electrical and electronic products, and recycled accordingly. This product is not suitable for disposal with ordinary household garbage.

FCC Rules

FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 1. This device may not cause harmful interference, and
   2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.