PHP9030ST 30 inch Built In Touch Control Induction Cooktop
“
Specifications
- Model: PHP9030ST
- Brand: GE ProfileTM
- Type: Built-In Touch-Control Induction Cooktop
- Dimensions: 30 inches
- Power Rating: 240V – 7.4 KW, 208V – 6.4 KW
- Amps: 240V – 40 Amps, 208V – 40 Amps
- Features: Melt, Warm, Induction, Sync Burners, Wi-Fi Connect,
Bluetooth Connect, Precision Cooking, Smart Cookware Rebate,
Optional Filler Trim Kit, Optional Sous Vide Probe, Guaranteed
Fit
Installation Instructions
Dimensions and Installation Information
Important installation requirements:
- 3-inch free area needed between the bottom of the cooktop and
any combustible material. - 15-inch minimum distance required from the cooktop to adjacent
overhead cabinets. - Units come with a 48-inch flexible armored cable.
Cutout Filler Trim Kit
If the countertop cutout is larger than the specified
dimensions, use the filler trim kit (JXTR32B for black or JXTR32W
for white) to adjust the opening.
Approximate Cooking Dimensions
- Max depth of unprotected overhead cabinets: 13 inches
- Minimum clearance from rear wall: 1-3/4 inches
- Cooktop dimensions range from 28-1/16 to 29-7/8 inches in width
and 19-5/8 to 19-3/4 inches in depth.
Installation Above a Wall Oven
- Minimum distance from front edge of countertop to front edge of
cooktop cutout: 2-1/2 inches - Minimum distance from top surface of countertop to top surface
of wall oven support platform: 31-1/4 inches
Product Usage Instructions
To ensure accurate installation:
- Create a template when cutting the opening in the counter.
For precise cooking:
- Use the touch-control features like Melt, Warm, Induction, and
Sync Burners. - Utilize Wi-Fi and Bluetooth Connect for smart cooking
options. - Set precise temperatures using Precision Cooking.
FAQ
Q: Can this cooktop be installed above a wall oven?
A: Yes, it can be installed above an approved wall oven with
specific clearance requirements.
Q: Are there optional accessories available for this
cooktop?
A: Yes, optional accessories include a Filler Trim Kit (JXTR32B
or JXTR32W) and a Sous Vide Probe (JXPROBE1).
Q: Is this cooktop guaranteed to fit in the space of a previous
GE or other brand’s cooktop?
A: Yes, GE cooktops are guaranteed for an exact fit, or GE
Appliances will pay up to $100 toward modifications.
“` [pdfjs-viewer url=”/m/2bf74e39301ba4d62865e8670da06e0334fcbc1d4316cddd3775b7d6a07da9c4_optim.pdf” viewer_width=100% viewer_height=800px fullscreen=true download=true print=true]
PHP9030ST
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 30″ induction cooktops are approved for use over select GE 27″ and GE 30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″ minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16″ x 20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
13″ MAX. depth of unprotected overhead cabinets
4-5/8″ at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4″ at rear of air intake
29-7/8″
21″
Cooktop
1-3/4″ MIN. to rear wall
19-1/4″
28-1/16″
19-5/8″ to 19-3/4″
28-1/2″ to 28-5/8″
2-1/2″ MIN. Required
To insure accuracy, it is best to make a template when cutting the opening in the counter
30″ MIN. Clearance from countertop to unprotected overhead surface
See label next to nameplate for MIN. clearance to rear wall.
2″ MIN. clearance to side wall from cut-out on the left of the unit
2″ MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15″ MIN. clearance height.
15″ MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop
INSTALLATION ABOVE A WALL OVEN
2-1/2″ MIN
From front edge of countertop to front edge of cooktop cutout
31-1/4″ MIN
From top surface of countertop to top surface of wall oven support
platform
KW RATING 240V 7.4 208V 6.4 AMPERAGE 240V 40 Amps 208V 40 Amps
NOTE: Check local codes for required breaker size.
For answers to your Monogram, GE CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by Underwriters Laboratories
Specification Revised 03/23
PHP9030ST
GE ProfileTM 30″ Built-In Touch-Control Induction Cooktop
FEATURES AND BENEFITS Maximum Responsiveness – 19 Control Levels Power Boil Precision Temperature Control Easy Clean Surface Safe Surface Most Efficient Heating Synchronized Elements Chef Connect Smart Cookware Rebate for 11″ Smart Pan Timer Built-in WiFi Control Lock Fit Guarantee Model PHP9030STSS Stainless Steel
Melt Warm
Induction
HOT
HOT
High
Melt
Warm
Sync Burners
Wi-Fi Connect
HOT
Bluetooth Connect
Low
High
o F C APP PREHEATING
Precision Cooking
o F C APP PREHEATING
TAP COOKWARE SET TEMP
HR
MIN
HOT
Low
Timer Cancel Hold 3 Sec
High
High
Lock Controls Hold 3 Sec
All Off
SMART COOKWARE REBATE Smart pans pair with this smart cooktop to ensure you get the perfect cooking results. Earn a rebate for a free 11″ Hestan Cue Smart Pan.
OPTIONAL FILLER TRIM KIT Fill in any counter top gaps with this filler trim kit. Order part number JXTR32B.
OPTIONAL SOUS VIDE PROBE A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.
Specification Revised 03/23
Documents / Resources
 |
GE APPLIANCES PHP9030ST 30 inch Built In Touch Control Induction Cooktop [pdf] Owner's Manual PHP9030ST 30 inch Built In Touch Control Induction Cooktop, PHP9030ST, 30 inch Built In Touch Control Induction Cooktop, Built In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Control Induction Cooktop, Induction Cooktop, Cooktop |