PHP7036DT 36 inch Built In Touch Control Induction Cooktop
“
Specifications
- Brand: GE Profile
- Model: PHP7036DT
- Type: Built-In Touch-Control Induction Cooktop
- Dimensions:
- Cooktop Width: 36 inches
- Cooktop Depth: 20-1/2 inches
- Cooktop Height: 4-5/8 inches at baffle near center, 3-1/4
inches at rear of air intake
- Electrical Requirements:
- KW Rating: 240V 11.6 / 208V 10.1
- Amps: 240V 50 Amps / 208V 50 Amps
- Requires a 48 flexible armored cable
- Features:
- Induction Technology
- Wi-Fi Connect
- Bluetooth Connect
- Multiple Heat Settings: Low, High, Melt
- Precision Cooking
Installation Instructions
Before installing the GE ProfileTM 36 Built-In Touch-Control
Induction Cooktop, ensure the following:
- Allow a 3-inch free area between the bottom of the cooktop and
any combustible material. - Ensure a minimum of 15 inches from the cooktop to adjacent
overhead cabinets. - For installation above a wall oven, maintain specific
measurements as detailed in the manual.
Product Usage Instructions
To use the GE ProfileTM 36 Built-In Touch-Control Induction
Cooktop:
- Ensure the cookware is compatible with induction
technology. - Press the power button to turn on the cooktop.
- Select the desired heat setting using the touch controls (Low,
High, Melt, etc.). - Place the cookware on the induction cooking zone.
- Adjust the temperature or settings as needed during
cooking. - After use, turn off the cooktop and clean it as per the
maintenance instructions.
FAQs
1. Is this cooktop compatible with all types of cookware?
The GE ProfileTM 36 Built-In Touch-Control Induction Cooktop is
compatible with induction-compatible cookware. Smart pans are
recommended for optimal performance.
2. Can I use a Sous Vide Probe with this cooktop?
Yes, you can use an optional Sous Vide Probe (part number
JXPROBE1) to achieve great results on the stove.
3. How can I ensure a proper fit during installation?
If you are replacing a similar cooktop from GE Appliances or
another brand, GE cooktops are guaranteed for an exact fit. Visit
geappliances.com for more information on fit guarantee and
modifications.
“` [pdfjs-viewer url=”/m/ce5baa8a1ab8e914daeba890950a5c2f36f14bea32388b92b6d20c9a1dee89fd_optim.pdf” viewer_width=100% viewer_height=800px fullscreen=true download=true print=true]
PHP7036DT
GE ProfileTM 36″ Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE: 36″ induction cooktops are approved for use over select GE 30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″ minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.
APPROXIMATE COOKING DIMENSIONS
4-5/8″ at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4″ at rear of air intake
36″
20-1/2″
Cooktop
18-7/8″
33-3/4″
19-1/8″ to 19-1/4″
1-3/4″ MIN. to rear wall
33-7/8″ to 34″
2-1/2″ MIN. Required
To insure accuracy, it is best to make a template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
2-1/2″ MIN
From front edge of countertop to front edge of cooktop cutout
31-1/4″ MIN
From top surface of countertop to top surface of wall oven support
platform
13″ MAX. depth of unprotected overhead cabinets
30″ MIN. Clearance from countertop to unprotected overhead surface See label next to nameplate for MIN. clearance to rear wall.
2″ MIN. clearance to side wall from cut-out on the left of the unit
2″ MIN. Clearance from cutout to nearest vertical wall or cabinet on right side of the unit below the 15″ MIN. clearance height.
15″ MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop
KW RATING 240V 11.6 208V 10.1 AMPERAGE 240V 50 Amps 208V 50 Amps
NOTE: Check local codes for required breaker size.
For answers to your Monogram, GE CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
ADA
COMPLIANT
Listed by Underwriters Laboratories
Specification Revised 10/22
PHP7036DT
GE ProfileTM 36″ Built-In Touch-Control Induction Cooktop
FEATURES AND BENEFITS Maximum Responsiveness – 11 Control Levels Power Boil Precision Temperature Control Easy Clean Surface Safe Surface Most Efficient Heating Synchronized Elements Chef Connect Compatible Cooktop with Smart Timer Built-in WiFi Control Lock Fit Guarantee Model PHP7036DTBB Black on black
Induction
Wi-Fi Connect
Bluetooth Connect
Low
Low
HOT
HOT
HOT
High
High
Melt
Low
HOT
High
o F C APP PREHEATING
Precision Cooking
o F C APP PREHEATING
TAP COOKWARE SET TEMP
HR
MIN
HOT
Low
Timer Cancel Hold 3 Sec
High
High
Lock Controls Hold 3 Sec
All Off
Melt
COMPATIBLE COOKTOP WITH SMART COOKWARE Smart pans easily pair with this smart cooktop to ensure you get the perfect cooking results. Accessories sold separately.
OPTIONAL SOUS VIDE PROBE A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.
GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications.
Visit geappliances.com for more info.
Specification Revised 10/22
Documents / Resources
 |
GE APPLIANCES PHP7036DT 36 inch Built In Touch Control Induction Cooktop [pdf] User Manual PHP7036DT 36 inch Built In Touch Control Induction Cooktop, PHP7036DT, 36 inch Built In Touch Control Induction Cooktop, Built In Touch Control Induction Cooktop, Touch Control Induction Cooktop, Induction Cooktop, Cooktop |