GF-CH03 Embedded Multi Functional Integrated Cup Holder
“
Specifications:
- Product Name: Embedded Multi-Functional Integrated Cup
Holder - Model: GF-CH03AC
- Input Voltage: DC 24-36V
- Motor Control: Dual Motor
- Cup-Holder Refrigeration: Yes
- Output Power Wireless Communications Charging Standard: Qi
2.0 - Magsafe Output: 15W Max
- USB-A Output: 18W Max
- Type-C Output: 20W Max
- A+C Output Sofa Light Strip: 15W Max
- Options: 15W Max
- Protection: Over current, over voltage, short circuit
protection - Product Size: 200mm x 127mm x 115mm
Product Usage Instructions:
Charging:
- Ensure the power supply meets the requirements specified in the
manual. - Ensure a stable connection of the power interface.
- Place the device within the specified charging distance and
remove any metal objects from the area.
Temperature Control:
- Keep reasonable space around the product for heat
dissipation. - Wait until the temperature drops to room temperature before
using the device if it becomes too hot.
Maintenance:
- Regularly clean the product to prevent dust accumulation.
- Avoid exposing the product to extreme temperatures or
moisture.
FAQ:
Common Product Faults:
- Phenomenon: Cannot start charging
- Cause:
- The power supply does not meet requirements.
- Unstable connection of power interface.
- Remedy:
- Replace the adapter that matches the requirements.
- Reinsert the power socket.
- Phenomenon: Charging is slow
- Cause:
- The charging distance is out of range.
- There are other metal objects in the charging area.
- Remedy:
- Ensure the device is within the specified charging
distance. - Remove any metal foreign bodies from the charging area.
- Ensure the device is within the specified charging
- Phenomenon: The temperature of product is too high
- Remedy:
- Keep reasonable space for heat dissipation.
- Wait until the temperature drops to room temperature before
using the device.
“`
320.00 mm
Common product faults
Phenomenon
Cannot start charging
Charging is slow
Cause
1.The power supply does not meet requirements. 2.Unstable connection of power interface. 3.The charging distance is out of range. 4.There are other metal objects in the charging area.
The temperature of product is too high
Remedy
1.Replace the adapter that match. 2.Reinsert the power socket. 3.using within the specified distance. 4.Remove metal foreign bodies
1Keep reasonable space for heat dissipation 2Please wait until the temperature drops to room temperature before using the device
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Hazardous Substance Declaration
This mark is the product pollution control mark, the number of which represents the environmental service life. In this period of time, under normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property.
Name of parts
Electronic components Plastic casing Electroplated aluminum alloy parts Non-electroplated metal parts
Lead (Pb)
Mercury (Hg)
Hazardous substance
Cadmium (Cd)
Hexavalent -Chromium (Cr(VI))
Polybrominated -Biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
Double faced adhesive tape
Synthetic cork
Silicon parts
This form is in term of Stipulation SJ/T 11364 O It means that the content of the harmful substance in a part of the part is lower than the limit requirements specified in GB/T 26572. X It means that the content of the harmful substance in a part of the part exceeds the limit requirements specified in GB/T 26572.
Product Warranty
The warranty services of repair, exchange and return are provided for wireless charger products in strict accordance with the provisions of Consumer Rights Protection Law of the Peoples Republic of China and Product Quality Law of the Peoples Republic of China. The service contents are as follows: 1. If any performance fault occurs in the product within 7 days from the day following the purchase (signature for receipt), you can enjoy the return or exchange services free of charge after testing and confirmation by the after-sales service center; 2. If any performance fault occurs in the product within 8-15 days from the day following the purchase (signature for receipt), you can enjoy exchange or repair services free of charge after testing and confirmation by the after-sales service center; 3. If any performance fault occurs in the product within 1 year from the day following the purchase (signature for receipt), you can enjoy repair services free of charge after testing and confirmation by the after-sales service center; Non-warranty Provisions The warranty services of repair, exchange and return are not provided in one of the following cases, and only repair is provided for a fee; 1. Damage is caused by consumers due to improper use, repair and storage; 2. Damage is caused due to the repairs not performed by authorized service providers designated by the Company; 3. No valid warranty services or invoices or proof of purchase can be provided; 4. Damage is caused due to force majeure.
Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd Website: http://www.gcteq.com
Checked Certificated of qualification
GF-CH03 User manual
Instruction
Magsafe Wireless Charging
Type-C
Cooling Cup holder
Cup light USB-A
Installation
1. The opening size of the furniture surface is as follows:
GF-CH03AC
Key function description
Key icon
Function
Cooling Cup holder
Notes
Cup light Keylock
Reset Open
Hold down for 3 seconds
Close Lumbar Open
Lumbar Close Head Open
Head Close
Specification
Product name
EmbeddedMulti-FunctionalIntegratedCupHolder
Model
Input Voltage
Motor control
Cup-holder refrigeration
Output power wireless Communications charging standard
Magsafe
USB-A Output
GF-CH03AC
GF-CH03BC
DC 24-36V
dual motor
dual motor
Have
Have
15W Max
15W Max
Qi2.0
Qi2.0
Have
Have
18W Max
18W Max
Type-C Output
20W Max
20W Max
A+C Output Sofa light strip
15W Max
Options
15W Max
Protection
Over current, over voltage, short circuit protection
Product size
200mm*127mm*115mm
240.00 mm
Documents / Resources
 |
GCteq GF-CH03 Embedded Multi Functional Integrated Cup Holder [pdf] User Manual 2ATX3-GFCH03AC, 2ATX3GFCH03AC, gfch03ac, GF-CH03 Embedded Multi Functional Integrated Cup Holder, GF-CH03, Embedded Multi Functional Integrated Cup Holder, Multi Functional Integrated Cup Holder, Functional Integrated Cup Holder, Integrated Cup Holder |