GAOST HARDWARE GLY-059B Wireless Speaker Instruction Manual

GAOST HARDWARE GLY-059B Wireless Speaker

Please read the instructions carefully before use

Specifications

• Product name: Wireless speaker
• Model No.:GLY-059B
• Input: 12Vdc-29Vdc 3A
• Subwoofer power:25W Max
• Tweeter power: 1 OW Max
• Product name: AC/DC ADAPTER
• Model No.:GRP-90W2900-A
• OUTPUT:29V 3.0A,87.OW
• Product name: USB charger
• Model No.: G6F-AC
• Input: 12-29Vdc 3A
• Output: USB-A:
• USB-A+Type-C: 5Vdc,3A 15W Max

Installation Guide

Note:

1. Wireless host
2. Subwoofer
3. Tweeter
4. Power adapter
5. Connect cable
6. G6F-AC charger

The Wireless name is “Wireless Connection.” Upon powering on the speaker, the voice prompt announces, “Wireless connection is ready to pair”; a “ding-dong” sound indicates that the Wireless connection has been successfully established.

Accessories list

Speaker location

If the above steps do not resolve the issue,record the issue (we recommend taking a video or photo)and contact us. Non-professionals should not disassemble the device to avoid voiding the warranty.

Safety notice

1. Installation Safety
   This product must be installed and secured by a professional or someone with installation expertise. Ensure that the is securely attached to t h e surrounding wooden or upholstered surfaces to prevent personal injury caused by loosening or falling.
2. Electrical Safety
   Do not use in damp environments (such as bathrooms, near water sources) or in locations where it may be exposed to water droplets or mist.Use only the power adapter specified on the product nameplate to void overloading caused by prevent overheating or damage.
3. Ventilation and Heat Dissipation
   During installation, ensure a ventilation gap of at least I Omm around the headboard cutout to prevent overheating of the speaker’s power amplifier components during prolonged operation, which could lead to malfunction or fire hazards.
4. Hearing Protection
   Do not set the volume too high while sleeping (recommended not to exceed 60% of the maximum volume). Listening at high volumes for extended periods may damage your hearing.
5. interference Prevention
   The speaker emits a magnetic field during operation. Keep it at least 20 cm away from devices susceptible to magnetic interference, such as pacemakers, IC cards, and mechanical watches. If you experience abnormal Bluetooth connections or static noise, check for nearby 2.4 GHz band devices such as Wi-Fi routers or microwave ovens.
6. ChiId and Pet Safety
   Prevent children from inserting foreign objects such as toys or metal pieces into the speaker grille. Do not allow pets to chew on the cables or the unit itself, as this could cause short circuits or choking hazards.
7. Cleaning and Maintenance
   Always disconnect the power before cleaning. Wipe the surface gently with a soft, dry cloth. Do not use organic solvents such as alcohol or thinners, as these may seep into the grille and damage the speaker drivers.
8. Troubleshooting Abnormal Conditions
   If the speaker produces abnormal noise, smoke, strange odors, or excessive heat, immediately disconnect the power and contact after-sales service for repairs. Do not attempt to disassemble the unit yourself.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.