Skewb M Smooth Magnetic Speed Cube
“
Specifications:
- Product Name: GAN Skewb
- Technology: GAN Dual Precision System (GES Pro)
- Adjustment Features: Center Travel and Tension
- Center Travel Control: Numerical Distancing Nut
- Tension Control: Tension Nut
- Color Options: Light Blue (pre-installed), Dark Blue
- Features: Corner cutting, Anti-POP, Anti-Corner-Twist, Axis
distance
Product Usage Instructions:
Center Travel Adjustment:
- Open the corner piece from the easy-opening groove.
- Push the distancing nut down and twist it until the desired
number lines up with the anchor at the tip of the core. - Release so the anchor locks up the nut.
Tension Adjustment:
- Insert the tool into the GES nut from the matching slots.
- Turn counter-clockwise to increase the tension.
- You will feel and hear a click with every turn as the nut moves
downward.
FAQ:
Q: How do I adjust the tension on GAN Skewb?
A: To adjust tension, insert the tool into the GES nut from the
matching slots, then turn counter-clockwise to increase
tension.
Q: What are the color options available for GAN Skewb?
A: The available color options are Light Blue (pre-installed)
and Dark Blue.
Q: How many settings of Center Travel are enabled by GES
Pro?
A: GES Pro enables 4 settings of Center Travel through 2 sets of
Numerical Distancing Nuts.
“`
: GES PRO –
1 ()
1
2
3
4
5
6
1 1
GAN GES Pro
GES PRO –
2 4
Ø/ 1/2/3/4 4
4
:
1
1
2 3
2 Ø
:
Skewb Instructions
GAN Skewb uses GAN Dual Precision System (GES Pro), which enable separate control and adjustment of center travel and tension. Adjust center travel by the center numerical distancing nut with bare hands, and tension by adjusting the tension nut.
Numerical Distancing Nut
Tension Nut
Center Travel: GES PRO-Numerical Distancing Nut
2 sets of Numerical Distancing Nuts enabling 4 settings of Center Travel
Ø : in and out position. Only when the pointer is resting here can you take out or put in a tension nut. 1/2/3/4 : 4 different axis distances.
GAN’s Magnet Core
Light Blue (pre-installed)
Dark Blue
Corner cutting
Anti-POP Anti-Corner-Twist
Axis distance
TensionGES PRO-Tension Nut
Set up steps
Yellow-Red-Green
Only 4 corner pieces have grooves for White-Orange-Green adjustment .
White-Red-Blue Yellow-Orange-Blue
Setting 1 (flush position): minimum tension
1
2
3
4
5
6
Each turn counter-clockwise increases the tension by one grade.
Step 1Center Travel Adjustment (no tool needed)
1 Changing settings
Open the corner piece from one of the easy-opening groove . Push the distancing nut down and twist it, until the desired number lines up with the anchor at the tip of the core, release so the anchor locks up the nut.
Press 1
2 Twist
3 Release
2 Swapping the nut Push the nut down and twist it until the Ø point lines with the anchor, release and the nut unlocks and can be removed.
Step 2Tension Adjustment
Insert the tool into the GES nut from the 3 matching slots. Then turn counter-clockwise to increase the tension. You will feel and hear a click with every turn as the nut moves downward.
Documents / Resources
 |
GANCUBE Skewb M Smooth Magnetic Speed Cube [pdf] Instruction Manual GES PRO, Skewb M Smooth Magnetic Speed Cube, Skewb M, Smooth Magnetic Speed Cube, Magnetic Speed Cube, Speed Cube, Cube |