GAMESIR Super Nova Multi Platform Gaming Controller Instruction Manual

GAMESIR Super Nova Multi Platform Gaming Controller

SWITCH CONNECTION TUTORIAL

  1. On the Switch main menu, go to “Controllers”-“Change Grip/Order”,
  2. Toggle the controller’s mode switch to Bluetooth model and press the Home button to power on.
  3. Hold A + 0° O until the channel indicator starts flashing up and down rapidly, and wait for the connection.
  4. If the connection is unsuccessful, press and hold a + on the controller to re-enter pairing status.

ANDROID CONNECTION TUTORIAL

  1. loggle the controllers mode switch to Bluetooth mode and press the Home button to power on.
  2. Hold (• + 0 until the channel indicator * starts flashing rapidly.
  3. Find “GameSir-Nova Pro” in the device’s Bluetooth list and click to connect.
  4. If the connection is unsuccessful, press and hold (* + (• on the controller to re-enter pairing status.

IOS CONNECTION TUTORIAL

  1. Toggle the controller’s mode switch to Bluetooth mode Z and press the Home button to power on. Hold a + 0% until the channel indicator starts flashing rapidly.
  2. Find “DURLSHOK 4 Wireless Controller” in the device’s Bluetooth list and click to connect.
  3. If the connection is unsuccessful, press and hold * + on the controller to re-enter pairing status.
Loading PDF…
Download PDF

CALIBRATION STICKS & TRIGGERS
1. Set the trigger to long pull position. Hold @+@+* to enter the calibration. The RGB
strips will slowly flash white during entry.
2. At this point, push both sticks fully to their limits and rotate them 2-3 times. Press the trigger
fully down 3 times. Finally, press O


O to exit. The RGB strips will return to their normal state.
GYROSCOPE
Place the controller on a stable, flat surface. Hold M +•, and the gyroscope will
automatically start the calibration. During the calibration, the RGB strips will flash red and
blue alternately. When the RGB strips returns to their original lighting effect, the calibration
is complete.


CUSTOMIZE CONFIGURATION VIA THE “GAMESIR” APP
Go to the gamesir.com website on your phone or scan the QR code on
the right to download the “GameSir” app.


CUSTOMIZE CONFIGURATION VIA THE “GAMESIR CONNECT” APP
Download the “GameSir Connect” software from the Microsoft Store or the official website
at gamesir.com on your PC.
CONTROLLER RESET


If you encounter unresponsive controller buttons, you can use a small object similar to the
size of a paperclip to press the Reset button inside the circular hole on the back of the
controller. This will force the controller to power off.
A PLEASE READ THIS PRECAUTIONS CAREFULLY
• CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if
swallowed or inhaled.


• DO NOT use the product near fire.
• DO NOT expose to direct sunlight or high temperatures.
• DO NOT leave the product in a humid or dusty environment.
• DO NOT impact the product or cause it to fall due to strong impact.
• DO NOT touch USB port directly or it might cause malfunctions.
• DO NOT strongly bend or pull cable parts.


• Use a soft, dry cloth while cleaning.
• DO NOT use chemicals such as gasoline or thinner.
• DO NOT disassemble, repair or modify.
• DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage
when used for non-original purposes.
• DO NOT look directly at the optical light. It might damage your eyes.
• If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

Function
Button Combination
Description
Forced Mode
Switch
switch between Xinput, Switch, and DS4 modes
* This switching method only works in receiver
Back Button
Setting
→ +L4RA
Press and hold the M button + 14/R4 button
simultaneously until the corresponding RGB
strip flashes white slowly.
Press the button to be programmed, then press
L4/R4 button again to exit and save.
*If exiting the setting process without pressing
the button, the button value will be cleared.
Stick’s Dead Zone
Press and hold the M button and push down
on the left/right stick to toggle the
corresponding stick’s dead zone.
Turbo Function
Correspond-
ing Button
While holding the M button, press
A/B/x/Y/LB/RB/LT/RT to activate the Turbo
tuncton tor tnot button
Repeat this operation to deactivate.
* Double-click the M button to clear all Turbo
settings.
Trigger Mode
Switch
Toggle Trigger
Gear Switch
Switch between long and short trigger pulls by
toggling trigger gear switch. After switching.
gently press the trigger fully down three times
to automatically calibrate the pull distance.
Hair Trigger
Modo
Press and hold the M button + LT/RT button to
enable/ disable hair trigger mode.
* The trigger needs to be set to the long pull
position.
Adjust Vibration
Intensity
I + 0/0
While holding the M button, press – / +
button to decrease/ increase the vibration
intensity level.
Switch Lighting Effects
Switch Brightness
Customize RGB
lighting Strips
Adjust Saturation
Adjust Animation Speed
Switch Layout
Hold and press the M button
and the south face button to
swap button values of A-B
and X-Y.
* ABXY features an
interchangeable design
allowing for the removal and
swapping of the operation
yout between@@andoePLEASE READ THIS PRECAUTIONS CAREFULLY
• CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if
swallowed or inhaled.
• DO NOT use the product near fire.
• DO NOT expose to direct sunlight or high temperatures.
• DO NOT leave the product in a humid or dusty environment.
• DO NOT Impact the product or cause it to fall due to strong impact.
• DO NOT touch USB port directly or it might cause malfunctions.
• DO NOT strongly bend or pull cable parts.
• Use a soft, dry cloth while cleanina
• DO NOT use chemicals such as gasoline or thinner.
• DO NOT disassemble, repair or modify.
• DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage
when used for non-original purposes.
• DO NOT look directly at the optical light. It might damage your eyes.
• If you have any quality concerns or suggestions, please contact GameSir or your local distributor.
WASTE ELECTRICAL & ELECTRICAL EQUIPMENT INFORMATION
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRICAL EQUIPMENT) |
Applicable in the European Union and other European countries with separate collection systems.
This mark on the product or accompanying documents means that it should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this product to designated collection
points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your
products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly
will help save valuable resources and prevent any potential negative effects on human health and the
environment, which could otherwise arise from inappropriate waste handling. Household users should contact
either the retailer where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling. Business users should contact their supplier for
further information. If you do so, you will ensure that your disposed product undergoes the necessary treatment,
recovery and recycling, thereby preventing negative potential effects on the environment and human health.
DECLARATION OF CONFORMITY
FE FOC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna,
— Increase the separation between the equipment and receiver.
— Connect the equioment into an outlet on a circuit different from that to which the receiver is connected

Documents / Resources

PDF thumbnailSuper Nova Multi Platform Gaming Controller
Instruction Manual · Super Nova Multi Platform Gaming Controller, Multi Platform Gaming Controller, Platform Gaming Controller, Gaming Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.