GameSir Cyclone 2 Wireless Controller User Manual

Scan the code for more tutorials →

https://www.gamesir.hk/pages/tutorials-manuals

PACKAGING CONTENTS

• Controller *I
• 1m Type-C Cable *1
• Manual *1
• Thank You & After-sale Service Card *1
• Gamesir Sticker *1
• Certification *I
• Receiver *I
• Charging Dock (Optional) #1

REQUIREMENT

*Switch -Windows 10 or above +Android 8.0 or above =i0S 13 or above

DEVICE LAYOUT

BASIC FUNCTION INTRODUCTION

CONNECTION STATUS

OTHER DESCRIPTIONS

HOME BUTTON STATUS

WINDOWS CONNECTION TUTORIAL

WIRED CONNECTION

1. Use the included Type-C cable to connect the controller to the computer.

2. The Home Indicator will stay solid, indicating a successful connection.

BLUETOOTH CONNECTION

1. Press and hold for 2 seconds until the Home Indicator blinks blue, then release the buttons.

2. Open the Bluetooth list on your computer, find the device named “Wireless Controller”, and click to connect.

3. The Home Indicator will stay solid, indicating a successful connection.

* If the connection is not successful, please press and hold the controller’s Home Button + Share Button for 2 seconds to re-enter pairing mode.

RECEIVER CONNECTION

1. Plug the receiver into the USB port of the device to be connected; the receiver indicator will flash.

2. Press and hold for 2 seconds until the Home Indicator flashes green, then release the buttons and wait for the controller to connect to the receiver.

3. The connection is successful when the indicators on both the controller and the receiver stay solid.

*If the connection is not successful, please press and hold the controller’s Home Button + Share Button for 2 seconds, and press the Pairing Button on the receiver to re-pair.

SWITCH CONNECTION TUTORIAL

BLUETOOTH CONNECTION

1. On the Switch main menu, go to “Controllers” – “Change Grip/Order” and wait on this screen.

2. Press and hold for 2 seconds until the Home Indicator flashes red, then release the buttons and wait for the connection.

3. The Home Indicator will remain solid, indicating a successful connection.

* If the connection is not successful, please press and hold the controller’s Home Button + Share Button for 2 seconds to re-enter pairing mode.

ANDROID CONNECTION TUTORIAL

BLUETOOTH CONNECTION

1. Press and hold for 2 seconds until the Home Indicator flashes yellow, then release the buttons.

2. Open the Bluetooth list on your phone, find the device named “GameSir-Cyclone 2”, and click to connect.

3. The Home Indicator will remain solid, indicating a successful connection.

* If the connection is not successful, please press and hold the controller’s Home Button + Share Button for 2 seconds to re-enter pairing mode.

iOS CONNECTION TUTORIAL

BLUETOOTH CONNECTION

1. Press and hold for 2 seconds until the Home Indicator flashes blue, then release the button.

2. Open the Bluetooth list on your phone, find the device named “DUOSHOK 4 Wireless Controller”, and click to connect.

3. The Home Indicator will remain solid, indicating a successful connection.

* In a combination button, the interval time between each button will be triggered according to the operation time during programming. * If the setting process exceeds 10 seconds, it will automatically save and exit.

ADVANCED TUTORIAL

BACK BUTTON SETTING

No button values by default! Programmable for Single button or Multi-button Programmable modes: A/B/X/Y/LB/RB/LT/RT/LS/RS/View Button/Menu Button/D-pad/Left Stick/Right Stick

1. Set L4/R4 Button Values: Press and hold the M button + L4/R4 buttons simultaneously until the Home Indicator slowly flashes white. Press the button to be programmed (supports single button/combination button), then press the L4/R4 button. When the Home Indicator returns to the mode color, the L4/R4 button setting is complete.

2. Cancel L4/R4 Button Values: Press and hold the M button + L4/R4 buttons simultaneously until the Home Indicator slowly flashes white, then press the L4/R4 button. When the Home Indicator returns to the mode color, the L4/R4 button cancellation is complete.

TURBO SETTING

There are 4 modes: Slow (8Hz), Medium (12Hz), Fast (20Hz), and Off. Programmable modes: A/B/X/Y/LB/RB/LT/RT 1. Set Turbo function: Press and hold the M button, then press the button you want to set to enable Turbo function with Slow mode. Repeat this operation to cycle through the Turbo modes (Slow, Medium, Fast, Off). 2. Clear Turbo function: Double-click the M button. * When a button with Turbo function is activated, the Home indicator flashes continuously. * The setting will still be saved after a restart.

BUTTON COMBINATION

STICK & TRIGGER CALIBRATION

1. Press and hold the View button + Menu button + Home button until the Home Indicator flashes white slowly.

2. Make sure not to touch the LT, RT, and the left and right joysticks. Press the A button. The Home Indicator will turn off.

3. Press LT and RT to their maximum travel, rotate the left and right joystick to their maximum angle in circles 3 times each, and then press the A button. The Home Indicator will turn back on, indicating the calibration is complete.

GYROSCOPE CALIBRATION

Place the controller horizontally on a flat surface, then long-press  buttons for 3 seconds. At this point, the Home indicator will flash red and blue alternately rapidly. Calibration is complete when the Home Indicator returns to its mode color.

INSTALL THE “GAMESIR CONNECT2” SOFTWARE FOR CUSTOM CONFIGURATION

Visit the official website gamesir.hk or the Microsoft Store to download and use the “GameSir Connect” software. The app allows for firmware upgrades, adjustment of stick and trigger function range, LED light effect adjustments, vibration intensity settings, button mapping, and button testing.

CONTROLLER RESET

In case of abnormal behavior or being unable to power the controller on or off, you can use an object similar to the size of a SIM ejector pin to press the reset button located in the circular hole on the back of the controller to force a shutdown.

⚠ PLEASE READ THIS PRECAUTIONS CAREFULLY

• CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
• DO NOT use the product near fire.
• DO NOT expose to direct sunlight or high temperatures.
• DO NOT leave the product in a humid or dusty environment.
• DO NOT impact the product or cause it to fall due to strong impact.
• DO NOT touch USB port directly or it might cause malfunctions.
• DO NOT strongly bend or pull cable parts.
• Use a soft, dry cloth while cleaning.
• DO NOT use chemicals such as gasoline or thinner.
• DO NOT disassemble, repair or modify.
• DO NOT pursue purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
• DO not device directly at the optical light. It might damage your eyes.
• If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

WASTE ELECTRICAL & ELECTRICAL EQUIPMENT INFORMATION

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRICAL EQUIPMENT) Applicable in the European Union and other European countries with separate collection systems.

This mark on the product or accompanying documents means that it should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product.

The European Union’s Waste Electrical and Electronic Equipment Directive (WEEE) requires that certain negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users, should contact their supplier for further information. If you do so, you will ensure that your product is treated in a manner that minimizes the risk of harm and recycling, declaration of conformity negative effects on the environment and human health.

DECLARATION PREVENTING

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC CAUTION

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

CE STATEMENT OF COMPLIANCE WITH EU DIRECTIVE

Hersby, Guangzhou of Compliance with EU Directive This device complies with Directive 2014/30/EU, 2014/53/EU & 2011/65/EU and its amendment (EU) 2018/1563.