Installation Manual
X3 220110 Mid Tower ARGB Case
| ① Dust filter ② Top panel ③ M/B ④ Right side panel ⑤ Front plate |
⑥ Bottom plate ⑦ PSU cover ⑧ Left tempered glass side panel ⑨ Screws for tempered glass side panel ⑩ Rear panel |
PSU installation
Put psu into chassis from left side
Lock 4pcs psu screws to fix psu
M/B installation
Put M/B to chassis on right position and fix screws
HDD installation
 |
loosen 2pcs screws for HDD bracket, pull out HDD bracket |
 |
Fix HDD on bracket |
 |
SSD installation. Fix SSD on bracket up side and lock screws first, after that fix HDD |
 |
Put bracket on chassis after HDD installation, and lock 2pcs screws |
SSD installation
Take off SSD bracket, then fix SSD on bracket and lock bracket to previous place
Fan and Water cooling installation
Install fan and water cooling on top panel
Put fan or water cooling on top panel from inner side and fix screws from outside
Install fan and water cooling on front plate
Put fan or water cooling on front plate from inner side and fix screws from outside
Install fan and water cooling on rear panel
Put fan or water cooling on rear plate from inner side and fix screws from outside
Install fan on psu cover
Put fan on upside of psu cover and fix screwss
Put VGA card on M/B and fix 2pcs screws. available to adjust the height of VGA card
Install side panel
Put side panel on right position and push it, then lock 2pcs screws
Put side panel on right position and lock 4pcs screws
Documents / Resources
 |
GAMEMAX X3 220110 Mid Tower ARGB Case [pdf] Instruction Manual 1718267985465725, X3 220110, X3 220110 Mid Tower ARGB Case, X3 220110, Mid Tower ARGB Case, Tower ARGB Case, ARGB Case |