GAMEMAX-LOGO

GAMEMAX Infinity Pro Unobstructed Hardware Showcase

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-PRODUCT

Specifications

  • Model: INFINITY PRO
  • Side Panel: Tempered glass left side panel
  • Front Panel: Tempered glass front panel
  • Top Panel: Tempered glass top panel
  • PSU Installation: Supported
  • HDD and SSD Installation: Supported
  • Motherboard Support: Standard ATX, Micro ATX, Mini ITX
  • Cooling System Support: Fans – 120mm x5, 140mm x2; Liquid cooling – 120/240/280/360mm

Product Usage Instructions

Remove the Side Panel

  • Locate the tempered glass left side panel of the INFINITY PRO case and remove it carefully to access the internal components.

PSU Installation

  • Following the manufacturer’s instructions, install the power supply unit in the designated PSU mounting area.

HDD and SSD Installation

  • Use the provided screws to mount 3.5 HDDs, and 2.5 SSDs in the respective drive bays securely.

Motherboard Installation

  • Install your chosen motherboard (ATX, Micro ATX, Mini ITX) onto the motherboard standoff using the screws provided.

GPU Card Installation

  • Follow the step-by-step instructions provided by your GPU manufacturer for installing your graphics card securely into the PCIe slot.

Cooling Fan and Liquid Cooling System Installation

  • Install the cooling fans and liquid cooling system as per your cooling requirements. Ensure proper cable management and avoid plugging components into the wrong interfaces to prevent damage.

FAQ

  • Q: How many fans does the INFINITY PRO support?
    • A: The case supports up to 5 fans, including 120mm and 140mm sizes, for optimal cooling performance.
  • Q: Can I install a 360mm liquid cooling system in the case?
    • A: Yes, the case supports liquid cooling systems up to 360mm for efficiently cooling your components.

Hardware List

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-1

I/O Panel

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-2

Exploded View

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-3

  • A) Tempered glass left side panel
  • B) Tempered glass front panel
  • C) Tempered glass top panel
  • D) Right side panel
  • E) Chassis
  • F) HDD bracket
  • G) M/B Panel Fan x3 (optional)
  • H) Bottom Fan x3 (included)
  • I) Rear Fan x2 (included)
  • J) Bottom Dust Filter

Remove the side panel

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-4

  • GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-5Tempered glass is fragile, please handle it with care, and pay attention to safety!

PSU Installation

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-6

3.5” HDD and 2.5” SSD InstallationGAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-7

Motherboard InstallationGAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-8

GPU Card InstallationGAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-9

Cooling Fan and Liquid Cooling System Installation

GAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-10

CONTROLLER DEMO LINK GUIDE

V1.9 FAN HUB & RMT-AP CONTROLLER DEMO LINK GUIDEGAMEMAX-Infinity-Pro-Unobstructed-Hardware-Showcase-FIG-11

Documents / Resources

GAMEMAX Infinity Pro Unobstructed Hardware Showcase [pdf] Installation Guide
Infinity Pro Unobstructed Hardware Showcase, Unobstructed Hardware Showcase, Hardware Showcase, Showcase

References

Leave a comment

Your email address will not be published. Required fields are marked *