Rialaitheoirí Canbhás OCS MAN1516_00.1

“

Sonraíochtaí:

• Model: Canvas OCS
• Screen Resolutions:
  • Canvas 4: 320×240
  • Canvas 5: 480×272
  • Canvas 7: 800×480
  • Canvas 7D: 800×480
  • Canvas 10D: 1024×600
• Tacaithe File Formats: .jpg, .PNG

Treoracha Úsáide Táirge:

Checking Firmware Revision:

To check the firmware revision on the controller:

1. Open System Menu > Diagnostics > Version.

Upgrading Firmware for Canvas Series:

1. Download the zipped folder from the firmware websuíomh
   ar fáil.
2. Extract the folders from the zipped file.
3. Cóipeáil an zip file into the root directory of a microSD
   cárta.
4. Insert the microSD card into the Canvas OCS.
5. Use the System Menu to update the firmware:
   1. Insert the microSD card into the Canvas OCS.
   2. Press and hold the System button for several seconds to display
      the System Recovery screen.
   3. Select System Upgrade SD.

Customizing Splash Screen:

1. Create a custom splash.jpg with the correct resolution as per
   the Canvas model.
2. Cuir an saincheaptha files on a microSD card and insert it into the
   OCS.
3. Press and hold the System Key until the System Recovery Screen
   ar taispeáint.
4. Select Replace System Graphics SD to update the splash
   scáileán.

Updating Function Keys:

1. Replace the .PNG images in the keys folder of the Canvas
   firmware files.
2. Place the keys folder on a microSD card and insert it into the
   OCS.
3. Press and hold the System Key until the System Recovery Screen
   ar taispeáint.
4. Select Replace System Graphics SD to update the function
   eochracha.

Ceisteanna Coitianta (FAQ):

C: Conas is féidir liom teagmháil a dhéanamh le tacaíocht theicniúil?

A: You can contact technical support through the following
modhanna:

• North America: Tel: 1-877-665-5666, Fax: 317 639-4279, Web:
  hornerautomation.com,
  Email: techsppt@heapg.com
• Europe: Tel: +353-21-4321266, Fax: +353-21-4321826, Web:
  hornerautomation.eu,
  Email: tech.support@horner-apg.com

“`

Firmware Update Manual: Canvas
Clár ábhair
Introduction ………………………………………………………………………………………………………………………. 1 How to Check for Current Firmware Revision…………………………………………………………………………. 2 Upgrading Firmware for Canvas Series ………………………………………………………………………………….. 3 Firmware Upgrade Using the System Menu …………………………………………………………………………… 3 System Register Bits Used for Firmware Upgrade …………………………………………………………………… 4 User Configurable Splash Screen ………………………………………………………………………………………….. 4 User Configurable Splash Screen, continued ………………………………………………………………………….. 5
Réamhrá
Use these instructions to update or change firmware on the Horner OCS Canvas Controllers. WARNING: Firmware updates should only be performed when the equipment being controlled by the OCS is in a safe, non-operational state. Communication or hardware failures during the firmware update process can cause the controller to behave erratically resulting in injury or equipment damage. Confirm that the functions of the equipment work correctly following a firmware update before returning the OCS to operational mode.

MAN1516_00.1_EN_Canvas_FW

Leathanach 1

Conas Athbhreithniú Firmware Reatha a Seiceáil
To check the firmware revision (Rev) on a controller, open System Menu > Diagnostics > Version.

MAN1516_00.1_EN_Canvas_FW

Leathanach 2

Upgrading Firmware for Canvas Series
NOTE: Use a FAT-formatted single-partition microSD card. It is essential that there is no bootable partition or associated boot files ar an gcárta nó ar an tiomáint.
1. Download the zipped folder from the firmware website: https://hornerautomation.com/controller-firmware-cscan/
NÓTA: Nuair a bheidh an file downloads, it will have the following name (or a variation thereof): FWXX.XX_Canvas_fullset.zip (The initial filename is preceded by a version number so that the user knows what version is being downloaded.)
2. Extract the folders from the zipped file 3. Copy the following zip file into the root directory of the microSD card.
4. Insert the microSD card into the Canvas OCS. 5. Use one of the following methods to update the firmware:
· System Menu · System Register Bits
Uasghrádú Firmware ag Úsáid Roghchlár an Chórais
1. Insert the microSD card into the Canvas OCS. 2. Press and hold the System button for several seconds to display the System Recovery screen. 3. Select System Upgrade SD.
NOTE: The firmware upgrade begins after a brief announcement.

MAN1516_00.1_EN_Canvas_FW

Leathanach 3

Giotán Clár an Chórais a Úsáidtear le haghaidh Uasghrádú Firmware
· %SR154.9 – Set by user to upgrade firmware using microSD card. · %SR154.10 – Set by user to upgrade firmware using USB. · %SR154.11 – Set by firmware to request confirmation for upgrading firmware, resetting %SR154.9 /
%SR154.10. When user resets SR154.11, the upgrade process begins. · %SR154.12 ­ Setting this bit high (ON) will not retain programs / variables after firmware update.
Setting this bit low (OFF) will retain programs / variables after firmware update. · %SR154.14 ­ If the firmware upgrade is not required, then %SR154.14 will be set. For example: In
case firmware on OCS and on the microSD / USB is same. · %SR154.15 ­ This bit will be set by firmware if there is any error in updating firmware such as a
missing firmware file.
User Configurable Splash Screen
A custom splash screen can be updated on the Canvas OCS units. NOTE: The user must create the splash.jpg with the correct resolution as per the model used.

OCS Canvas 4 Canvas 5 Canvas 7 Canvas 7D Canvas 10D

Resolution 320×240 480×272 800×480 800×480 1024×600

1. The custom splash screen must be a .jpg image file leis an filename splash.jpg. 2. Place the custom files on a microSD card, then into the OCS. 3. Press and hold the System Key until the System Recovery Screen is displayed. 4. Select Replace System Graphics SD to replace the splash screen from a microSD card.

MAN1516_00.1_EN_Canvas_FW

Leathanach 4

User Configurable Splash Screen, continued
User-created splash screen and function keys can also be updated on the Canvas OCS units.
Users must replace the .PNG images located in the keys folder of the Canvas firmware files. Only the keys folder is required from the Canvas firmware files. Note: The keys folder can be found at Canvas_fullset > Options > keys.
Important! Replacements can be made to the following customizable images and must:
· be named exactly the same as the original images, · saved as a .PNG image inside the keys folder · saved as a 60×60 resolution

1. Place the keys folder into the root directory of a microSD card. 2. Insert the MicroSD card into the OCS. 3. Press and hold the System Key until the System Recovery Screen is displayed. 4. Select Replace System Graphics SD to replace the splash screen from a microSD card.

Tacaíocht Theicniúil
North America: Tel: 1-877-665-5666 Facs: 317 639-4279 Web: https://hornerautomation.com Email: techsppt@heapg.com

Europe: Tel: +353-21-4321266 Fax: +353-21-4321826 Web: http://www.hornerautomation.eu Email: tech.support@horner-apg.com

MAN1516_00.1_EN_Canvas_FW

Leathanach 5

Doiciméid / Acmhainní

HORNER AUTOMATION MAN1516_00.1 OCS Canvas Controllers [pdfLámhleabhar Treoracha MAN1516_00.1 OCS Canvas Controllers, MAN1516_00.1 OCS, Canvas Controllers, Controllers

Tagairtí

• Lámhleabhar Úsáideora