Software Catalog and Developer Platform
“
Eolas Táirge
Sonraíochtaí:
- Model: Adapter Backstage
- Supported Devices: Android and Apple phones
- Wi-Fi Network: Default PS – 88888888
- IP Address for Submission: 192.168.1.101
Treoracha Úsáide Táirge
For Apple Phone:
- Enable Wi-Fi on your iPhone and connect to the adapter’s Wi-Fi
líonra. - Confirm successful connection to the adapter’s Wi-Fi.
- Open Safari or any browser on your iPhone and enter the URL:
192.168.1.101. - Enter vehicle information and issue description in the
red-highlighted area on the browser page. - Tap Submit to send the log. Note the displayed Case No. for
tracking and assistance.
Le haghaidh Fón Android:
- Enable Wi-Fi on your Android phone and connect to the adapter’s
Líonra Wi-Fi. - Ensure proper connection to the adapter’s Wi-Fi.
- Go to Settings > WLAN > WLAN Direct on your phone and
select the adapter’s device name for direct connection. - Oscail a web browser on your phone and navigate to
192.168.1.101. - Tap Switch P2P on the interface and wait for confirmation
message: Switch P2P OK. - Fill in vehicle information and issue description in the red
box area on the browser page. - Tap Submit to upload the log. Keep note of the Case No. for
cúnamh breise.
Ceisteanna Coitianta (FAQ)
Q: Do I need to disconnect Android Auto or Apple CarPlay before
using the adapter?
A: Yes, it is important to disconnect Android Auto or Apple
CarPlay before proceeding with any backstage operations to avoid
coimhlint.
Q: What should I do if my phone is already connected to Android
Auto/Apple CarPlay?
A: Turn off both Wi-Fi and BT on your phone before continuing
with the submission process.
“`
Adapter Backstage Log Submission Guide
Important: Please disconnect Android Auto or Apple CarPlay before proceeding with any backstage operations. Precondition If Android Auto/Apple CarPlay is currently connected, turn off both Wi-Fi and BT on your phone before continuing.
Fón Apple
The method for submitting logs in the background 1. Enable Wi-Fi on your iPhone and connect to the adapter’s
Wi-Fi network. (Default PS: 88888888) 2. Confirm your iPhone is successfully connected to the adapter’s
Wi-Fi. (Refer to the figure for connection status.)
1
3. Open Safari or any browser on your iPhone and enter the following URL: 192.168.1.101 (as shown in the figure
4. On the browser page: Enter your vehicle information and a detailed description of the issue in the red-highlighted area. Tap “Submit” to send the log. Once the submission is successful, a Case No. will be displayed. Copy the Case No. or take a screenshot. Send it to our customer service team for tracking and assistance.
2
Fón Android
Steps to Submit Logs from Android Phone 1. Enable Wi-Fi on your Android phone and connect to the adapter’s Wi-Fi network. (Default PS: 88888888) 2. Ensure your phone is connected to the adapter’s Wi-Fi. (Refer to the image for confirmation of proper connection.)
3. On your phone, go to: Settings > WLAN > WLAN Direct. Locate and select the adapter’s device name to establish a direct connection.
3
4. Oscail a web browser on your phone and navigate to the following address: 192.168.1.101 as shown in the figure
5. Tap “Switch P2P” on the interface. Wait for the confirmation message: “Switch P2P OK”
4
6. Return to the browser page. Fill in your vehicle information and a description of the issue in the designated red box area. Tap “Submit” to upload the log. Upon successful submission, a Case No. will be displayed. Copy the Case No. or take a screenshot. Send it to our customer service team for further assistance.
5
Doiciméid / Acmhainní
 |
Bacannatage Software Catalog and Developer Platform [pdfTreoir Úsáideora Software Catalog and Developer Platform, Software Catalog and Developer Platform, Developer Platform, Platform |