F500S Range Bookshelf Speaker
“
Specifications
- Product: F500S Range
- Manufacturer: Fyne Audio
- Designed by: Experienced team of engineers in Scotland
- Construction: Highest standards
Product Usage Instructions
1. Introduction
Thank you for choosing Fyne Audio loudspeakers. Before
installing, read the manual for safety and optimal performance.
2. Safety
Ensure to read the manual completely before installation to
prevent injury or damage. Take care when unpacking and avoid using
the protective bag to lift the speakers.
3. Accessories Kit
Check the contents of the accessories kit provided with the
product to ensure you have all necessary items for
installation.
4. Spike Fitting
Thread the spikes and adjustment thumb wheels to level the
loudspeakers. Use cups on delicate floors to prevent damage.
5. Positioning
Place the loudspeakers ideally at specific distances from walls
for optimal performance. Experiment with positioning for best
stereo imaging results.
6. Connecting Speaker Cables
Consult your dealer for suitable cables. Use bare wire
connections or dedicated plugs/spade terminals for best
results.
FAQ
Q: Can I wall mount the F500S LCR model?
A: Yes, the F500S LCR can be wall-mounted. Ensure to use
appropriate fixings and follow the provided template for wall
mounting positions.
Q: What should I do before connecting speaker cables?
A: Make sure your amplifier is switched off before making
connections to avoid any damage to the system.
“`
F500S RANGE
FYNE ADVICE
ESSENTIAL INFORMATION GUIDE
TABLE OF CONTENTS
1.
Introduction
2.
Safety
3.
Accessories Kit
4.
Spike Fitting
5.
Positioning
6.
Connecting Speaker Cables
7.
Grilles
8.
Presence Control
9.
Running in
10.
Cabinet Care
11.
Warranty
12.
Specifications
1 INTRODUCTION
Thank you for choosing Fyne Audio loudspeakers, proudly designed by our experienced team of engineers in Scotland, and constructed to the highest standards. We believe they will give you many years of listening pleasure. Before installing these loudspeakers, please read this manual in full, both for safety reasons and to ensure you achieve the best performance possible.
2 SAFETY
For safety reasons, and to ensure you achieve the best performance possible, please fully read this document before installing these loudspeakers.
To prevent injury or damage when unpacking the loudspeakers, please do not use the protective bag to lift them in case it tears. If possible retain packaging for future use.
The spikes are very sharp – take care to avoid personal injury. If wall hanging the F500S LCR model, make sure the fixings used are appropriate and able to support the weight of the loudspeaker. The owner is responsible for safe installation and Fyne Audio accept no liability for loss, injury or damage by not doing so. Ensure your amplifier is switched off before making connections, to avoid damage.
3 ACCESSORIES KIT
Check the contents of the accessories kit provided with the product:
F5S, F500S Self-adhesive feet x 8
F501S, F502S
Spikes x 4 Adjustment thumb wheels x 4 Spike cups x 4
F500S LCR
Self-adhesive feet x 4
4
4 SPIKE FITTING
1
(F501S, F502S)
Thread the 4 spikes and adjustment thumb wheels to the inserts in the plinths of each loudspeaker. The spikes can be adjusted to level the loudspeaker, once level lock in place with the thumb wheels (Fig. 1).
On wooden or other delicate floors, use the cups provided to prevent damage to the surface.
5 POSITIONING
F5S, F500S: This loudspeaker is suitable for either stand or bookshelf mounting.
ideally no closer than 0.5m (20 inches) from the rear wall, and no closer than 1m (3 feet) from the side walls (Fig.2).
F501S, F502S: These loudspeakers in a stereo configuration should be positioned approximately 1.5- 4.5m apart (5- 15 feet),
Some degree of experimentation will provide the best results, especially with toe in towards the listener, to give the best stereo imaging (Fig. 2)
2
0.5 METRE MINIMUM
1.5 TO 4.5 METRES
1 METRE MINIMUM
5
F500S LCR: This loudspeaker is designed for either wall mounting or free standing in either stereo, LCR or rear channel applications (Fig. 3). When free standing, attach the 4 self-adhesive feet to avoid damaging the surface. The badge may be rotated to match orientation by first pushing from the rear.
When wall mounting, mark the wall mounting positions using the template provided.
Refer to SAFETY WARNING SECTION 2.
3
6
6 CONNECTING SPEAKER CABLES
Your dealer will be able to advise on the most suitable choice of cables for your budget and system, to obtain the best performance.
Bare wire connections may be made by unscrewing the terminal and making use of the hole in the threaded post. Preferably, dedicated 4mm plugs or spade terminals may be purchased, or are already fitted to terminated cable sets. Note, 4mm plugs are unsuitable for the F500S LCR when wall mounted.
F500S LCR: This model is provided with a single set of speaker terminals and should be wired according to Fig. 4.
F5S, F500S, F501S, F502S: These are provided with two sets of terminals, one for the HF and one for the LF. When using a single cable wire as shown, keeping the link bars in place (Fig. 5). For bi-wire operation remove the link bars, and wire with two sets of cable or a dedicated bi-wire cable (Fig. 6). This option will ensure the best possible sound quality.
Ensure connections are made positive to positive and
negative to negative between the speaker and the amplifier.
4
5
Amplifier / Receiver
Right
Left
To Right Speaker
F500S LCR
Amplifier / Receiver
Right
Left
To Right Speaker
Left Speaker
SINGLE-WIRED
6
Amplifier / Receiver
Right
Left
To Right Speaker
SINGLE-WIRED
Left Speaker
BI-WIRED
7
7 GRILLES
Although the magnetically attached grilles are designed for maximum transparency, we always recommend removal for the best possible sound quality.
With the F501S and F502S models, the grille may be magnetically fixed to the rear of the loudspeaker for neatness and to avoid damage. Remove grille from the front of the loudspeaker (Fig. 7) and locate on rear (Fig. 8).
On the F500S LCR. the badge may be rotated to match orientation by first pushing from the rear.
7
8
8
8 PRESENCE CONTROL
The F5S, F500S, F501S and F502S models are provided with a `Presence’ control switch which only affects the lower treble region of 2.5 – 5.0kHz, and influences articulation and vocal clarity, also having an effect on image depth (Fig. 9).
Start with the control in the top (0) position. The central (+) position increases the presence region, while the lower (-) position lowers it (Fig. 10). Achieving the correct presentation is equivalent to focusing the lens on a camera, to achieve the most realistic sound-staging depth.
9
Presence Adjustment
+4 dB +2 dB
0 dB -2 dB -4 dB
100 Hz
1 kHz
10 kHz
20 kHz
10
9 RUNNING IN
Like all loudspeakers, being electro-mechanical devices, the F500S’s require a degree of running in to reach optimum performance. We recommend simply listening to them at normal levels for around 40 hours to achieve this.
10 CABINET CARE
The cabinet may be cleaned with a microfiber or lint free cloth, lightly moistened to remove marks if necessary. Avoid exposure to extremes of heat, humidity and direct sunlight for extended periods of time.
On no account use solvents or abrasive materials, as this will cause damage and invalidate the warranty.
9
11 WARRANTY
1. No maintenance of the loudspeaker is necessary.
2. Please register your Fyne Audio Limited product online at www.fyneaudio.com. All of our products have been produced and tested with care and precision to give first-class service. 3. All passive loudspeakers are guaranteed for a period of 7 years from the date of purchase from an authorised Fyne Audio Limited dealer. This warranty is subject to the absence or evidence of misuse, overload, or accidental damage, applies only to the original registered owner, it is non transferable, and covers only genuine Fyne Audio Limited products with the original undamaged serial number and proof of purchase.
4. All active and electronic components are guaranteed for a period of 2 years from the date of purchase from an authorised Fyne Audio Limited dealer subject to the absence of, or evidence of, misuse, overload or accidental damage.
5. If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification, incorrect installation or connection, matched with improper equipment or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage. 6. If you suspect a problem with a Fyne Audio Limited product, in the first instance, discuss it with your Fyne Audio Limited dealer. If you require further assistance, then we ask that you deal directly with your local Fyne Audio Limited distributor. If you cannot locate your distributor please contact Fyne Audio Limited Customer Services, via our website listed above or at the e-mail enquiries@fyneaudio.com
7. Do not ship any product to Fyne Audio Limited without previous authorisation.
8. LIABILITY
Other than the warranty and services set out in this warranty, to the fullest extent permitted by law, Fyne Audio Limited and its Authorised Distributors shall not be liable to you and/or any third party or entity whatsoever for:- any loss, damages and/ or malfunction caused to any product(s) which is/are connected to any of the Fyne Audio Limited products any damages, loss and liability (except for any personal injuries or death), whether direct, indirect, incidental, consequential special, punitive or otherwise, howsoever caused by, arising out of, or otherwise in relation to the installation, delivery, use, service, repair, replacement and/or maintenance of the Fyne Audio Limited product; or any damages, loss and liability (except for any personal injuries or death) under this warranty in respect of any act, omission, or negligence of any of their technicians, employees, agents, representatives or independent contractors relating to the actual or purported performance of any of the obligations under this warranty.
9. Without limiting the above, the maximum liability of the Fyne Audio Limited and its Authorised Distributors under this warranty shall not in any event or under any circumstances exceed the actual purchase price paid for the Fyne Audio Limited product(s).
10
12 SPECIFICATIONS
Model System type
Recommended amplifier power (Watt RMS) Continuous power handling (Watt RMS) Sensitivity (2.83 Volt @ 1m) Nominal impedance Frequency response (-6dB typical in room) Drive unit complement
F5S
2 way, downwards firing port, with Tractrix (BassTraxTM) diffuser*
F500S
2 way, downwards firing port, with Tractrix (BassTraxTM) diffuser*
30 – 90
30 – 100
45
50
87dB 8 Ohm 55Hz 38kHz
89dB 8 Ohm 45Hz 34kHz
1 x 125mm IsoFlareTM, bass / mid with 19mm magnesium dome compression tweeter
1 x 150mm IsoFlareTM, bass / mid with 25mm magnesium dome compression tweeter
F501S
F502S
2 ½ way, downwards firing port with Tractrix (BassTraxTM) diffuser*
2 ½ way, downwards firing port with Tractrix (BassTraxTM) diffuser*
30 150
30 180
75
90
90dB 8 Ohm 36Hz – 34kHz
91dB 8 Ohm 30Hz 34kHz
1 x 150mm IsoFlareTM, bass / mid with 25mm magnesium dome compression tweeter
1 x 150mm bass
1 x 200mm IsoFlareTM bass / mid with 25mm magnesium dome compression tweeter
1.x 200mm bass
Crossover frequency
Presence control
Crossover type
Dimensions inc terminals and grille – HxWxD
1.8kHz +/- 3dB (2.5 5.0kHz)
270 x 174 x 228mm (10.6 x 6.9 x 9.0″)
1.7kHz
250Hz & 1.7kHz
+/- 3dB (2.5 5.0kHz)
+/- 3dB (2.5 5.0kHz)
2nd order low pass, 1st order high pass
325 x 204 x 317mm (12.8 x 8.0 x 12.5″)
984 x 250 x 317mm (38.7 x 9.84 x 12.5″)
250Hz & 1.7kHz +/- 3dB (2.5 5.0kHz)
1112 x 300 x 382mm (43.8 x 11.8 x 15.0″)
* Patented This information was correct at the time of print, for our most recent products and information visit www.fyneaudio.com
12 SPECIFICATIONS
Model System type
F500S LCR
2 ½ way, with auxiliary bass radiator (ABR)
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
30 – 150 75
Sensitivity (2.83 Volt @ 1m)
90dB
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
8 Ohm
56Hz 34kHz
1 x 150mm IsoFlareTM bass /mid with 25mm titanium dome compression tweeter
Crossover frequency
Presence control
Crossover type
Dimensions inc terminals and grille – HxWxD
1 x 150mm bass 1 x 150mm ABR
250Hz & 1.7kHz
None
2nd order low pass, 1st order high pass
200 x 530 x 152mm (7.9 x 20.9 x 6.0″)
* Patented This information was correct at the time of print, for our most recent products and information visit www.fyneaudio.com
NOTES
ENJOY
Thank you for choosing Fyne Audio loudspeakers, proudly designed by our experienced team of engineers in Scotland, and constructed to the highest standards.
WWW.FYNEAUDIO.COM
FYNEAUDIO
@FyneAudio
24 April 2025
Documents / Resources
 |
FYNE AUDIO F500S Range Bookshelf Speaker [pdf] Installation Guide F5S, F500S, F501S, F502S, F500S Range Bookshelf Speaker, F500S, Range Bookshelf Speaker, Bookshelf Speaker, Speaker |