Warning– To Reduce The Risk Of Fire Or Injury To Person

• Turn off/unplug and allow to cool before replacing lamp.
• Lamp gets HOT quickly. Contact only switch/plug when turning on.
• Do not touch hot lens, guard, or enclosure.
• Keep lamp away from materials that may burn.
• Do not touch the lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
• Do not operate the fixture fitting with a missing or damaged shield.

Warning – Risk Of Electric Shock

• May be installed less than 5′ (1.5 m) from a pool, spa, or fountain when used with a UL 379 listed transformer.
• A fixture shall not use tungsten halogen lamps unless the fixture is marked for such lamps.
• Supply connection and electrical components are located above ground level, except for secondary cord that is suitable for wet locations.

Low-voltage Cable Shall

• Be protected by routing in close proximity to the fixture or fitting or next to a building structure, such as a house or deck.
• Not be buried except for a maximum 6″ (152 mm) in order to connect to the main low-voltage cable.
• Have the length cut off so that it is connected to a connector within 6″ (152 mm) from a building structure, a fixture, or fitting

These products contain a light source of energy efficiency class G.

Customer Support

RP LED board replacement fxl.help/RPledboard

PP-36 LED board replacement fxl.help/PP36ledboard

Voltage Drop Calculator fxl.com/voltage-drop-calculator

Path Light Spacing Calculator fxl.com/pl-space-calc

fxl.com/support

LANDSCAPE & ARCHITECTURAL LIGHTING | Learn more. Visit fxl.com