FREAKS AND GEEKS A11 Wired PS4 Controller
Product Specifications
- Supported Platforms: PS4 / PS3 / PC
- Connection Method: 3m USB cable
- RGB Light: Backlit triangle, Square, Cross, Circle, and Home buttons
- Mic/Headset: 3.5mm TRRS stereo port, compatible with microphones and headsets
- Touchpad: Clickable
- Vibration: Double Vibration
Product Usage Instructions
- Plug the controller into the console.
- Press the Home button. The LED under the Home button will light up to indicate a successful connection.
Using the Controller on a Windows PC
- Plug the controller into the PC.
- The Home button will illuminate in blue, indicating a successful connection. By default, the controller operates in X-input mode on a PC with the device name as Xbox 360 Controller for Windows.
- To switch to D-input mode, press SHARE + Touchpad key for 3 seconds. The LED indicator will turn red, and the device name will change to PC/PS3/Android Gamepad.
- To turn on or off the backlight, press and hold the L1 + R1 buttons simultaneously for 5 seconds.
- If firmware updates are required, download the latest driver from the official website at freaksandgeeks.fr. Disconnect the controller and follow the provided driver update instructions.
Product Features
- Platforms Support : PS4/PS3/PC
- Connect Method : 3m USB cable
- Mic/Headset: With a 3.5mm TRRS stereophonic hole, supports mic and headset.
- Touchpad: Clickable
- Vibration: Double Vibration
Overview
Operation Guide
- PS4/PS3 Console
- Plug controller into console and then press the Home button, LED under Home button (Indication LED is under Home button) will keep lighting to indicate that the connection is successful.
Windows PC
- Plug a controller into the PC, and then the Home button will turn blue. It indicates connected successfully. The controller defaults to X-input mode on PC. The device name is “Xbox 360 Controller for Windows”.
- Press SHARE + Touchpad key 3 sec to switch to D-input, the LED indicator will switch to Red color. The device name is “PC/PS3 /Android Gamepad”.
Turn On/Off backlight
- Keep pressing the L1+R1 buttons for 5 seconds
Firmware Update Instructions
- The controller can be disconnected, which means you need a driver to update the controller.
- The latest driver can be downloaded from our website: freaksandgeeks.fr
Regulatory information
- Simplified European Union Declaration of Conformity :
- Trade Invaders hereby declares that this product complies with the essential requirements and other provisions of Directive 2011/65/UE, 2014/30/UE.
- The full text of the European Declaration of Conformity is available on our website www.freaksandgeeks.fr
- Company: Trade Invaders S.A.S.
- Address: 28, Avenue Ricardo Mazza, Saint-Thibéry, 34630
- Country: France
- Telephone number: +33 4 67 00 23 51
This symbol indicates that the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling.
Warning
- If you hear a suspicious sound, smoke, or a strange smell, stop using this product.
- Do not expose this product to microwaves, high temperatures, or direct sunlight.
- Do not let this product come in contact with liquids or handle it with wet or greasy hands. If liquid gets inside, stop using this product
- Do not subject this product to excessive force.
- Do not pull on the cable or bend it sharply.
- Keep this product and its packaging out of reach of young children. Packaging elements could be ingested. The cable could wrap around children’s necks.
- People with injuries or problems with fingers, hands, or arms should not use the vibration function
- Do not attempt to disassemble or repair this product. If either is damaged, stop using the product.
- If the product is dirty, wipe it with a soft, dry cloth. Avoid the use of thinner, benzene or alcohol.
CONTACT
- SUPPORT AND TECHNICAL INFORMATION WWW.FREAKSANDGEEKS.FR
- Freaks and Geeks® is a registered trademark of Trade Invaders®. Produced and imported by Trade Invaders, 28 av.
- Ricardo Mazza, 34630 Saint-Thibéry, France. www.trade-invaders.com.
- All trademarks are the property of their respective owners. These owners didn’t design, manufacture, sponsor, or endorse this product.
FAQ
- Q: How do I switch between X-input and D-input modes?
- A: Press SHARE + Touchpad key for 3 seconds to switch between X-input and D-input modes.
- Q: Where can I download firmware updates for the controller?
- A: Firmware updates can be downloaded from the official website at freaksandgeeks.fr.
Documents / Resources
 |
FREAKS AND GEEKS A11 Wired PS4 Controller [pdf] User Manual A11, A11 Wired PS4 Controller, Wired PS4 Controller, PS4 Controller, Controller |
