FREAKS AND GEEKS PS5 Wired Controller
PRODUCT OVERVIEW
SPECIFICATIONS
- Compatible with PS5 console.
- Connectivity: Wired connection via USB-C.
- Total Number of Buttons: 19 digital buttons including,
directional buttons (Up, Down, Left, Right), L3, R3, Create, Option, HOME, Touch, L1/R1, and L2/R2 (with trigger function), as well as a Turbo button. Additional ML and MR programmable buttons are located on the back, along with two 3D analog sticks.
Functionality
- Equipped with a 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) with a 125 Hz response rate for precision control.
- Features a dual-point capacitive touchpad on the front and supports dual-motor vibration.
- Includes multiple output ports, including a 3.5mm TRRS stereo jack for headphones and microphone, and a dedicated speaker output with RGB LED channel indicators for distinguishing users and roles.
Power Supply
- Working Voltage: 5V
- Working Current: 45mA
- Input Voltage: DC 4.5 – 5.5V
- Charging Input Current: 50mA
- Interface: USB-C
- Programmable Buttons: Back buttons ML and MR can be programmed via specific button combinations.
- Compatibility: Supports standard PS5 functions and can also operate in PS5 mode on PC via Steam.
OPERATION INSTRUCTIONS
PS5 Connection
- Turn on the PS5 console.
- Connect the controller to the console using the USB-C cable.
- Press the HOME button on the controller to power it on. Once the indicator light flashes, select a user profile, and the player indicator light will remain on.
Go to console settings and select:
- Settings → Peripheral Devices – Controller (General) → Connection Method → «Use USB-C Cable».
PROGRAMMING INSTRUCTIONS
ML Button Programming:
- Press and hold the Create button and the ML button simultaneously until the channel light flashes.
- Release both buttons, then press the desired function buttons (e.g., L1, R1, A, B) to assign them to the ML button.
- Press the ML button again to confirm. Once programming is complete, the channel light will stop ashing, and the ML button will now perform the assigned functions.
MR Button Programming:
- Press and hold the Option button and the MR button simultaneously until the channel light flashes.
- Release both buttons, then press the desired function buttons (e.g., L1, R1, X, O) to assign them to the MR button.
- Press the MR button again to confirm. The MR button will now execute the assigned functions in sequence, indicated by a running light display.
TURBO FUNCTION
- The following buttons can be set for Turbo mode: L1, L2, R1, R2.
- To Enable Manual Turbo Mode: Press the TURBO button along with the desired function button.
- To Enable Auto Turbo Mode: Repeat the above step to enable automatic turbo.
- To Disable Turbo Mode: Press the TURBO button and the function button a third time to turn off both manual and auto turbo modes.
FUNCTION EXCHANGE
Changing the mode of the 3D joysticks:
- Press Create +
to set the 3D joysticks to ‘square dead zone’ - Press Create + 0 to set the 3D joysticks to ‘circular dead zone’
ABXY Position Exchange: Press Create + R3 to swap the A/B and X/Y button functions.
LED LIGHT FUNCTIONS
- Turbo Indicator: a LED under the Turbo button blinks when the turbo function is active.
- Button Backlight: The four LEDs under the ABXY buttons provide constant decorative lighting when powered on.
- User Channel Indicator Lights: The four RGB LEDs on the top surface display the user channel associated with the PS5 console.
FIRMWARE UPDATE INSTRUCTIONS
If the controller disconnects following a console update, a firmware update may be required. The latest driver can be downloaded from our website: https://freaksandgeeks.eu/mises-a-jour/. Firmware updates should be performed using a Windows PC according to the update instructions provided.
WARNING
- If you hear a suspicious sound, smoke, or a strange smell, stop using this product.
- Do not expose this product to microwaves, high temperatures, or direct sunlight.
- Do not let this product come in contact with liquids or handle it with wet or greasy hands. If liquid gets inside, stop using this product
- Do not subject this product to excessive force. Do not pull on the cable or bend it sharply.
- Keep this product and its packaging out of reach of young children. Packaging elements could be ingested. The cable could wrap around children’s necks.
- People with injuries or problems with fingers, hands or arms should not use the vibration function
- Do not attempt to disassemble or repair this product. If either is damaged, stop using the product.
- If the product is dirty, wipe it with a soft, dry cloth. Avoid the use of thinner, benzene or alcohol.
REGULATORY INFORMATION
Simplified European Union Declaration of Conformity: Trade Invaders hereby declares that this product complies with the essential requirements and other provisions of Directive 2011/65/UE, 2014/30/UE. The full text of the European Declaration of Conformity is available on our website www.freaksandgeeks.fr Company: Trade Invaders S.A.S.
- Address: 28, Avenue Ricardo Mazza, Saint-Thibery, 34630
- Country: France
- Telephone number: +33 4 67 00 23 51
This symbol indicates that the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling.
Documents / Resources
 |
FREAKS AND GEEKS PS5 Wired Controller [pdf] User Manual PS5, PS5 Wired Controller, Wired Controller, Controller |
